Thanks so much for quite a while I was doing it wrong-trying to screw in all them bolts WHILE holding down the tire- sheesh- This makes sense and so much easier
The screws hold, but DO NOT use Loctite even if you use the weakest (like the pink Loctite 222). The little screws that hold the beadlock on the face of the wheel are very, very easy to break. It's almost guaranteed you'll break at least one, they're that weak. But just tighten them till right to the point of too tight (it's a very small balance between being torqued and broken) you'll understand as you tighten them yourself. Just give them a tug with the hex before and after every ride, they don't come loose usually, but they will untighten slightly as they settle into the wheel.
this does not make any sense, the way I see it, that black ring and its many screws are completely useless...they don't lock anything and if the ring locks the rubber lip, then why all these screws ?
i was nervous about getting some beadlock wheels but this eased my mind a ton! great video! :)
Thanks so much for quite a while I was doing it wrong-trying to screw in all them bolts WHILE holding down the tire- sheesh- This makes sense and so much easier
Yep no need to watch another video short and sweet and straight to the point!! Good video man!!
My tires aren’t straight they are secure but they wabble when the wheel spins do they need to be used and worn in or should I redo them
Great video on bead locks best one i have seen
Almost 1k!
what size of tire use for 1.9 inch beadlock?
Does this actually stay well? There’s no rubber being pinched between the beadlock and the rest of the wheel
Awesome thanks
Thanks
Made it easy
Excellent job! Made installing by first headlock wheels easy.
Nice, thanks man. I’m setting up my purchases for a TRX Sport kit build and this helped a lot!
what are you running for hub caps?
U helped me a lot
What if they have that groove on the inner wheel that goes inside the tire.. Do I still do same way asur video
would it make sense to put this set up on a losi lasernut? pros and cons please.
T. U. Brother, thanks to ur great video, i mounted my bead lock rim. When i got them, ???? Lol, saw ur video, its done. T. U. Nice job.
Anthony F that’s awesome, I’m glad I’m this video was able to help you make your decision!
Very good video
Do the bolts hold ?
Or is locktite needed ?
The screws hold, but DO NOT use Loctite even if you use the weakest (like the pink Loctite 222). The little screws that hold the beadlock on the face of the wheel are very, very easy to break. It's almost guaranteed you'll break at least one, they're that weak.
But just tighten them till right to the point of too tight (it's a very small balance between being torqued and broken) you'll understand as you tighten them yourself.
Just give them a tug with the hex before and after every ride, they don't come loose usually, but they will untighten slightly as they settle into the wheel.
How long do you think it takes for all 4 wheels
Is the hub hole 8mm or 12mm on the beadlock??Could you suggest some 8mm beadlocks..
I’m uncertain for the hub diameter, these are intended for 1/10 scale, I would assume they all have standard sizing.
Thanks!✌
Thank you again for the video that was very helpful
Thanks, this helps very much. Do you have a link to the wheels?
Thanks bro! 👍
Great tutorial!
Veri simple👍
Helped me :)
Rowan Seccombe 🙏🙏🙏
Locktight???
Ty 👍
Jeepdogsbikelife 1 🙏🙏🙏 thanks for watching! Pls sub!
ENZO.VLOGS oh i did 👍👍👍
Jeepdogsbikelife 1 thanks so much, that will help me greatly! Will be doing more RC stuff soon!
Jeepdogsbikelife 1 subbed!
Hi can anyone..give a link to the screw driver :) please
i put the corner in first
but sorry bro it is a circle
Sorry chica, it's a cylinder!
this does not make any sense, the way I see it, that black ring and its many screws are completely useless...they don't lock anything
and if the ring locks the rubber lip, then why all these screws ?
Bruh i was over here stresin because i was trying to put the top part on last