actually to fix a burnt out fan like the one that was broken you can use something called WD-40 or you can take the bearings out and bathe them in oil for 4 hours periodically altering positions or switch the motor fro another fan or take bearing off of another fan. Thats how I fix all of mine. cool ceiling fan assembly machine though. i put a 1 horsepower electric westinghouse utility motor on a cheap lasko box fan since the original motor was weak and was covered in fuzz so with this motor it can blow blankets off of beds and blow flatscreen monitors and LCD TVs over and blow the curtains off of windows. its an actual wind machine. nice fan machine though. pretty impressive.
If there isn't one already, you should make another ceiling fan video, only this time, get a strong enough motor and keep ramping up the speed until the blades fly apart.
and by the way which is kind of weird is that i just took apart that same prisa i think its called scanner printer last night. thats a weird coinsidence.
So, when you tested the fan for RPM'S. my calculation is that your fan spins at a maximum of 118.67 MPH. (190.980852 KM/H) And the G's are 5.379 G'S. The Newtons are too crazy. 69.09590283479525 Newtons. So 118 MPH. my fan motor only did 7 MPH. LMAO.
That would just slow the fan down, besides I have old videos of these running over 800rpm's with the blades pitched, just take a look in the "fans" playlist.
God that is horrifying glad they did not break under the force
I would be terrified standing that close to something spinning THAT fast
Those fans didn't like that scanner very much, chucked it pretty far! thanks for taking the time and doing a round 2 for us.
And you've got some stones to be standing right next to them at full RPM haha
These videos are brilliant! Make more, you're like a photonic Induction of fans!
Photonic Induction of Fans. PIF.
Omg put that thing on a Cessna 125 and you'll be moving in no time
That's Way Too BIG To Fit Into A Cessna 125
You're insane for standing next to that.
It’s not the destruction that’s terrifying
It’s how close he is to those fans!
Great experiment, keep those motor destruction video's coming.
RODALCO2007 radalco i love ur vids ^-^
you should have improvised some steel blades onto it. that was the scariest looking contraption iv seen in a while
He protecc
He attacc
But most importantly,
He fast as hecc
Jesus Christ! 😱
Those fans are crazy fast, especially the one on the bottom!
Nice destructions by the way! 😁
chop some fruit up with it! :D
That sounds messy, not a bad idea
The centrifical force imposed on those blades... Surprised they did not self destruct. Can't say I'd be standing right next to them
I wasn't standing next to them when I had first tried it, Also wood is very strong of not bent, just try to pull a pencil apart without bending it.
i think you should stand well back and get a beefy motor, keep going up voltage until it self destructs!!
If one of them blades fails or breaks, you could get hurt bad!! Like what you did! Be careful you could lose an eye!
Lose an eye? Ha! He could lose a whole fricken head!
lol
at least its not metal though
You should use a DYSON motor for the fans
Suicide sequence initiated
When Fans Fight!
if both fans were spinning at the same direction, it may take off like a helicopter
Cool now make a ceilingfan drone ^^
When you want to build you own F4U Corsair in your house 😊
You should have gotten +Stuntman81 to hop in there.
you guys are rocking
please try with a industrial one
or with a cheaper one
just realized i watched this back in 2015 lol
Homemade blender :)
Not stencil 😭
+SRCVintage Electronics agrred what waste they dont make stencil any more
Exactly :(
makes a great audio effect
lmfao on the outside run i was waiting for that shit to split the damn space time continuum XD.
Incredible.
Tandem motor makeshift helicopter engine
actually to fix a burnt out fan like the one that was broken you can use something called WD-40 or you can take the bearings out and bathe them in oil for 4 hours periodically altering positions or switch the motor fro another fan or take bearing off of another fan. Thats how I fix all of mine. cool ceiling fan assembly machine though. i put a 1 horsepower electric westinghouse utility motor on a cheap lasko box fan since the original motor was weak and was covered in fuzz so with this motor it can blow blankets off of beds and blow flatscreen monitors and LCD TVs over and blow the curtains off of windows. its an actual wind machine. nice fan machine though. pretty impressive.
I actually have the one in the thumbnail! It's in the back bedroom of a 1979 Country Inn mobile home.
Do part 3 but with metal blades
+BrazCoolZ Wish I could but I don't have one with metal blades.
If there isn't one already, you should make another ceiling fan video, only this time, get a strong enough motor and keep ramping up the speed until the blades fly apart.
Hahah I could put a treadmill motor on it.
@@HL4EHalfLife that would be awesome lol
THAT IS AN ENCON PREMIER DELUXE!! HOW DARE YOU DO THAT TO MY FAVORITE FAN!!!
The Top One is an SMC Promo.
The Bottom is An Encon Princess
Tomaserin Larocque they where already broken
Zane H They can be fixed....
That's a heritage faurnaux ceiling fan.
Sr. Fan hombre por la victoria no...
What an insane beast
Looks like a Kamov KA-50 about to take off.
i really wanted a high speed ceiling fan
stencil ghost blade
Battle of the fans!!
I want a part 3
Destruction explosion at 7:35
You invented a parts for electric airplane ✈
I'd want that ceiling fan to cool my house down
I bet you if you put that on a bush plane it would fly.
Let's made a elecreic plane with this xtreme fan.
that's fast and cool
He overclocked a ceiling fan lol
So this is how jigsaw made his traps...
LOL
and by the way which is kind of weird is that i just took apart that same prisa i think its called scanner printer last night. thats a weird coinsidence.
What is the bottom fan called
these videos should be at 60fps
Why would you leave a comment saying that?
Ps. parts of this video are at 120fps (slow-motion).
My cam goes QVGA 240fps
Fuck off.
stormblade123hsm qvga *pukes*
+Anonimo LLopi his camera cant do 1080p60
7:52 I wonder what makes this big shockwave : the thingy he drops on it exploding or the motors shattering ?
It was a shockwave
I wish you dropped a Nokia :}
7:17 - We have liftoff!
You clearly had no idea about g force limits
Try modified a ceiling fan with that motor and place it in the ceiling
Why!!!?
You legs and body gone, if the blade fly off, you literally............
7:43 fan electricity poping/motor buzzing
That top is one I have in my bathroom
What a breeze
Hampton bay pilot is now obsolete
What?
Over 250 mph
Did it get rather windy?
It was a little windy that day yes.
funny that ;)
Damn it I laugh so hard each time the figurative shit hits the fan.
takeoff in 3 2 1 0
So, when you tested the fan for RPM'S. my calculation is that your fan spins at a maximum of 118.67 MPH. (190.980852 KM/H)
And the G's are 5.379 G'S. The Newtons are too crazy. 69.09590283479525 Newtons. So 118 MPH. my fan motor only did 7 MPH. LMAO.
Cool!
I have that Dell Computer Same model 3:52
Next time do the same thing but change the angle of the fan so it turns into a helicopter
That would just slow the fan down, besides I have old videos of these running over 800rpm's with the blades pitched, just take a look in the "fans" playlist.
DISTRUSTION
-oh-
Haha imagine if it was on down rod
Smc?
Man, I could kill to buy an Encon Premier!
you should have a good paying job as much as yo know about electronics
Woot
Savage
That top fan confuses me
How so?
7:33
Can you so more battle bots videos?
607th like
you are a jinx