Problem with 25x25 is you have to order and stock more material, and you only have 22ish mm to drill and bolt, which can be a dog to drill in tight spots. By using sheet, you can fold it different ways to add more strength (ie S or C channel), you can make the bolted section as wide as you need, the material is already in stock and you can usually make it from scrap you would normally throw out.
Thanks for subscribing mate! I used stainless dome head bolts and put 50x50x3 aluminium square plates on the underside of the floor with a washer and nyloc nut 👍
Yeah good job mate, I like it & ur new HOH badge. Have u had any issues with the paper towel unrolling as u travel from vibrations etc? If it was unrolling at all I was thinking maybe u could add a little bit of thin-ish spring steel to apply a bit more down pressure from above or behind in centre of roll. Nice setup. Cheers
Cheers mate. Yes, my paper towel unrolls unfortunately. I'm sure if I make it a tighter fit into the towel roll it'll be much better. That's a great idea though! Thanks 🤙
Cheers mate. You can actually DIY a folder out of some basic materials such as angle iron and some pipes. There are a few videos on TH-cam of how to make them 👍
Hey mate just found your channel. Appreciate all the effort you go into showing all the steps! Top quality work! Keep it up
Much appreciated mate! I try to show as much detail as I can without it becoming too dragged out and boring.
Looks great. Absolute duck,s guts.😂
Haha cheers mate! 😁
Far out man you made that look easy! I wish I had the experience you’ve got in sheet metal! You’re very good at it!
Cheers mate! The magic of editing 😂 It's all just practise mate 👍
Love the whole build mate, nice fab skills.
Much appreciated mate!! Glad to hear your liking it 😁
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Nice work
Cheers Chris!
Great setup. So many good ideas in this build. Thanks for sharing.
Cheers mate. Thanks for watching!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
@@ottouring Subscribed now! :-)
Hi Matt,
Thanks for subscribing. I really appreciate it.
Hopefully you get some ideas or discover some great locations
Cheers
Craig
Out There Touring
Hi Craig. Please don't go and advertise your channel on my videos without even contacting me about it
Fantastic job!
Cheers Peter!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
My good... now that's a man cave with some toys!!!💰
Haha cheers mate
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Nice work! ugh I'm dreaming of a sheet metal bender/press like that.
Cheers mate! Definitely makes life a bit easier 😁
Great work!
Thanks Elizabeth!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Nicely done 👍🏾
Cheers mate!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Nice work mate
Looks like you have access to a workshop with some good gear and skills and ideas
Regards another fabricator who loves doing the same 👍
Cheers mate 🤙 Gotta love creating something from nothing 😁
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Would love to have a workshop like that
It certainly makes fabricating things easier 😁
great job mate
Much appreciated Steve!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sub
Cheers
Out There Touring
Kickass! 💯
Cheers bro!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sub
Cheers
Out There Touring
Very cool!
Cheers bro!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Awesome I like that
Cheers mate!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sub
Cheers
Out There Touring
So easy to do when you have all the tools. ……………………………..the skills also help a lot
More can be created with more skills and less tools than more tools and less skills. It's all about the operator 👍
Nice work, subbed.
Thanks mate! Appreciate it!
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
If only i could TIG weld. Cheers
Anyone can TIG weld. Its just practise 😊
Hey mate awesome video, good tip is to just use 25x25 angle for your locking lever bars, fair bit cheaper if you make a few and easy as
Cheers mate! Always more ways than one to skin a cat 🙂
Problem with 25x25 is you have to order and stock more material, and you only have 22ish mm to drill and bolt, which can be a dog to drill in tight spots.
By using sheet, you can fold it different ways to add more strength (ie S or C channel), you can make the bolted section as wide as you need, the material is already in stock and you can usually make it from scrap you would normally throw out.
@@MRMOPARMAN0426 I just use the angle because I make heaps of them so I have plenty in stock, then I just rivet them, but sheet is also a good way
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
G'day, awesome build. Have subscribed! What screws do you use to mount the pantry to the aluminum canopy floor? Are they self tappers?
Thanks for subscribing mate!
I used stainless dome head bolts and put 50x50x3 aluminium square plates on the underside of the floor with a washer and nyloc nut 👍
Yeah good job mate, I like it & ur new HOH badge. Have u had any issues with the paper towel unrolling as u travel from vibrations etc? If it was unrolling at all I was thinking maybe u could add a little bit of thin-ish spring steel to apply a bit more down pressure from above or behind in centre of roll. Nice setup. Cheers
Cheers mate.
Yes, my paper towel unrolls unfortunately. I'm sure if I make it a tighter fit into the towel roll it'll be much better. That's a great idea though! Thanks 🤙
Where did you source the netting. Awesome work!
Cheers mate! I got it from spotlight
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Thats wicked mate, you make em for other people or just your own ?
Cheers mate! Just make things like this for myself 🙂
Awesome work and build.
Did you make the canopy as well?
Cheers mate! Yes, I sure did 🤙
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Great video mate. If you were just starting out and didn’t have a folding machine like that why could you use instead?
Cheers mate.
You can actually DIY a folder out of some basic materials such as angle iron and some pipes. There are a few videos on TH-cam of how to make them 👍
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
How has the mesh netting held up over the past few months?
It's held up well! Would be nice if the mesh was a little bit stiffer, however I really can't complain
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
hey mate where did you get that handle on the slides?
Hey mate. I got it from Dunn and Watson 👍
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sun
Cheers
Out There Touring
Needs Coco Pops!
I have room for ALL the Coco pops!
How much for a custom pantry? Start a small business. All other pantry’s come standard dimensions.
Would you make and sell the paper towel holders ?
Keen to buy
Yea mate. Send me a message on my insta to discuss further 🙂 instagram.com/invites/contact/?i=1ab1wuhuaz25&
Hi,
Just read yr comment and thought you might get some ideas from my channel
Like, share and sub
Cheers
Out There Touring
You put your logo on upside down ;)
DOH!!! 😂