No one in all the videos don't show the way the mode gear from the big fork goes in a lot of people put it in the wrong way and fuck shit up thank you for showing the proper way it's installed.
Thank you so much. I enjoyed the video. My transfer case is making a clunk noise and I checked to see if it was the cross joints and they look really good considering the age of my 99 Ford expedition. That's when I realized it must be the chain in side the transfer case. Thank a million.
Are you having issues shifting this case in 4Lo? Looks like the nylon pads are missing from the Shift Mode fork when you reassembled... Thought the Oil pump had to be on the outside, too, at least on the NP231j
pumps on the outside for 231/241D/dhd, the center slip collar in his planet set was missing a snap ring on the back side, as mentioned missing snap ring on pilot bearing of tail housing, was missing shift fork pads, missing top spring thrust cup. if you do your own, print off an exploded diagram and make sure to double check what goes where. sucks to get it back in only to realize you missed a thrust washer or some shit
@@winchester37a There is a lot of noise and looseness in the transfer case so I assume it's the chain although it may also be the bearings. I have never found a 3rd party manufacturer of the chain so this is why I am looking for a new chain supplier.
i think you should watch other vids before atempt,it aint srteight so it aint going,little gear can be put in after.why not fully rebuild it seeing its out.,??>
No one in all the videos don't show the way the mode gear from the big fork goes in a lot of people put it in the wrong way and fuck shit up thank you for showing the proper way it's installed.
Thank you so much. I enjoyed the video. My transfer case is making a clunk noise and I checked to see if it was the cross joints and they look really good considering the age of my 99 Ford expedition. That's when I realized it must be the chain in side the transfer case. Thank a million.
Thank you, that was step by step simple to follow, have a good holiday.
Thanks so much for all the trouble to make a very informative video so we understand what is needed and how to do it !!
Erik Martinez's
This is exactly what I needed to see. Thanks!
Video was a big help thanks
I needed this... Thanks man.
Very good video. Thank you. So helpful
thank you very helpful gotta rebuild my self
Educational . Thanks.
Are you having issues shifting this case in 4Lo? Looks like the nylon pads are missing from the Shift Mode fork when you reassembled... Thought the Oil pump had to be on the outside, too, at least on the NP231j
pumps on the outside for 231/241D/dhd, the center slip collar in his planet set was missing a snap ring on the back side, as mentioned missing snap ring on pilot bearing of tail housing, was missing shift fork pads, missing top spring thrust cup. if you do your own, print off an exploded diagram and make sure to double check what goes where. sucks to get it back in only to realize you missed a thrust washer or some shit
What model car is this for, or does it matter?
Hell yeah.
I have a 242j in a 2002 Jeep Liberty. Have you ever seen the chain get loose enough to slip?
You figure out if the tcase chain was slipping? I have a 2007. Either the front diff or tcase is clunking steadily.
Can I pull the chain and get a few more miles out of a failing t case?
I'm new to having a 4x4(2011 sierra 4.8L -manual tcase).. Is it normal to be able to hear the chain movement from the case when accelerating?
It’s loose
Hi friend. I have a np203 on a 78' Chevy. Where can I buy a new chain for this transfer case? Thank you!
I have the same exact model, is it still doing good for you? Did you change the belt
@@winchester37a There is a lot of noise and looseness in the transfer case so I assume it's the chain although it may also be the bearings. I have never found a 3rd party manufacturer of the chain so this is why I am looking for a new chain supplier.
@@sandhollowhomestead6972 look at lmc, they had some unless they are sold out
My transfer case has a hole in the same location. Any idea how that happen?
Awesome
Thanks man
And the nice thing is you can do this with case in the jeep.😃😃😃😃
For what vehicle exactly
i think you should watch other vids before atempt,it aint srteight so it aint going,little gear can be put in after.why not fully rebuild it seeing its out.,??>
Year in the title
Why not just get a new case half and chain .... Spare t-case ...
Yes