Have a CPC4 that needs repair? Fast turn around and 1 Year warranty: nickselectronics.com/products/a0034461002-002 info@nickselectronicrepair.com 520-838-9359 Contact form on our website: nickselectronics.com/pages/contact
@@manuelaguilar8466 Yes sir, that is most definitely one we can fix. For more details on our repair service, check the link below: www.nickstvs.com/store/p3124/A0034461002.html
I have CPC4 for Freightliner cascadia which is not working, and I would like to ask you if I can bring it by my self then I can pay on the shop, or to pay when you finish the process before you ship it back to me. Thank you so much
@@hotsholife2545 Hello, Sorry I did not see your comment earlier. I am unsure if you already have brought in your module in for repair, but yes absolutely that would be fine.
After researching every option i decided to have Nick repair my cpc4. He was the most transparent and from these videos i could see he was also the best choice. I just got my cpc4 back today. Plugged it in and she fired right up. Thanks guys for getting me back to work.
You know I have seen alot of techs work on boards, but you definitely did a good job. You only applied heat where you needed and didn't drown the board in Flux.
We are south of you down in Tucson AZ. 5445 E 22nd St 85714 to be exact. Most of our customers are from out of town and mail in their modules for repair. I was just on the phone yesterday with someone in texas in the same situation, and he was told 6 months for the new module to come in so he is sending it to us for repair instead. We do 1-2 day turnaround time + shipping. If you want more details, you can email me at support@nickstvs.com, give me a call at (520)838-9359 or you can check out our listing linked below as well. www.nickstvs.com/store/p3119/A0034461002.html
hi,i have freighliner cascadia 2017,and no star, ABS Light staying on DEF Light staying on Instrument Cluster loses communication,i check all fuses is good,so ,is that a CPC4 issue? can u fix it?
Hello Ming, The symptoms you are describing are in line with CPC4 module failure but I can't guarantee that is 100% the case. I would recommend you have someone in person take a look at the truck, or swap out the CPC4 with someone elses to see if it takes care of the issue. If you don't have one or can't find anyone you can borrow one from, then you can try heating or cooling the device gently and trying. If it makes a difference, then your CPC4 is the fault and has the common cracked solder joints issue. If it does not, then it can still be at fault and may simply have a different failure but would require further troubleshooting.
If you are going to be a competitor, all I request is you make sure to do the job correctly, no short cuts, no throwing the board in an oven, otherwise it gives the repair industry a bad name.
We got the ZM-R5860C Economical BGA rework station upgraded. We bought it on Alibaba from Shenzhen Zhuomao Technology Co., Ltd. They are the manufacturers of the machine and have really good quality products. This is not the lowest tier but it's second to lowest. It sells for 2k but shipping is another $600 or so and the import tax is also about the same.
From my research it seems that this is usually the problem. However are the chips ever bad? Do you test them prior to the reball? My board has never been tampered with and I'm just making sure I'm not paying $1500 for a reball and it's not actually the issue with the cpc
Joshua, So far out of all the modules we have fixed we have not yet found the processor to ever be bad. I know ERD says they replace them and that's the way to do it, but it is not needed at all since the processor itself doesn't go bad. We also offer a repair service, if we don't fix your CPC4 we would not charge you. We do live test and troubleshoot the module and confirm it to have a fault before and after. If necessary we bring it out to live test in a truck, but that is rarely needed.
Did they have replacements available? Are you able to get it replaced? If you aren't able to find one, let me know, we can fix your bad one. If you are able to find a repalcement, can you let me know from where? I know a few people that contacted me saying their CPC4's got stolen out of their trucks and they asked if I had any for sale. If I can point them to someone, that would be great. They aren't able to pay eBay scalper price though.
Hey I believe my Cpc is my problem it’s throwing abs codes and not showing gear on dash, when abs codes are gone truck goes into gear. Can you fix this?
Yes this is a common fault with the CPC modules and of course, yes we can fix that no problem. If you want to send in the module for repair, you can send it directly to our storefront ATTN: Nick's TV repair 5445 E. 22nd St Suite 117 Tucson, AZ 85711 Please don't send the module without providing all of your information. We get a lot of repair requests, so PLEASE provide your first and last name, phone number, email address, and preffered return shipping address on a paper attached with the module, like that we know exactly who it belongs to when we get it, and we can easily get in contact with you if we have questions or need to communicate with you. If you have questions, give me a call at (520)838-9359 or email at support@nickstvs.com I am availble and can answer any questions you have.
I really should get paid to promote them at this point. Here is their entry level BGA rework machine www.alibaba.com/product-detail/Seamark-ZM-R5830-Entry-cheap-bga_1600487363616.html This is Seamark their company name is Shenzhen Zhuomao Technology. That is their entry level machine, and while we did get a fancier version of it, I think it's all bells and whistles and their basic model is just as good.
@@245artist You are welcome. Yeah, we have bought about 3 -4 different types of BGA machines in the past and have found them to be the best by far both in terms of how their machines operate, their designs, and quality of parts used. Good luck
Hi I'm having a cpc4 problem. I was told the unit had power but it's not sending power to the rest of the truck. I tried driving it to freightliner it took me about an hour to get there and I'm less than 25 minutes away. Is that something you can fix?
Hello, Yes that does sound like a common CPC4 failure which we have serviced and fixed many times. Are you local to Tucson? If so you can just drop it off at our local shop 5445 E. 22nd St Suite 117 Tucson, AZ 85711
Well we plan on being around for a very long time, so if you ever have any electronics repair needs, let us know, we are starting to expand our work into the automotive, commercial vehicles, including tractors and construction equipment.
Hello, Our shop address is below: 5445 E. 22nd St Suite 117 Tucson, AZ 85711 If you have questions, you can contact us by phone or email (520) 838 - 9359 support@nickstvs.com
I had a freightliner the other day with inlet outlet nox sensor codes. Ran two forced regens with my computer and Replaced both sensors and the code still came back is that because the CPC?
I don't think so. I have fixed a lot of CPC modules and I have never seen any cause that issue before. With that being said, I can't know for sure. I would recommend just bringing it to a shop, they would be able to better assist you. If it is a CPC4 failure however, it is most likely due to cracked solder joints between the processor and the PCB which is a failure that would be fixed with the reball repair service we offer.
I am sorry but I have to be harsh here. if you do not know how to identify the size of the solder balls on the module, then you most likely do not have the experience required to work on these. We have gotten dozens of tampered boards from reflow and reball attempts gone wrong and have made dozens of boards none repairable because of it. Lots of truckers are sidelined because they tried to get someone else to reball their board for cheaper and they couldn't do it right. Please unless you have lots of experience, do not try and reball this board. If you have no experience, this is not the type of board that you should use to learn how to reball. People's livelyhoods depend on these modules, and if the work is not done right, you will most likely cause more damage to the board. If you are truly interested in learning to reball, then learn on cheap affordable and readily available electronics.
Hello, It depends on the problem. Most of the time no you don't need to have it reprogramed, but sometimes yes. If you are looking to have one fixed, we have fixed hundreds and can help you with yours. Send us an email directly or fill out the contact form that is linked in the video description.
@@outlanderkid6524 We don't put prices on our TH-cam channel, you have to click on the link in the video description. Prices can change depending on market conditions, demand, and how busy we are. The best way to get our current prices is by going to our website. I also have the website link pinned in a comment at the top as well.
We try to do same day, but we have been getting a lot of repair requests. More than we can handle in fact. So we may increase our advertised turn around time from 1-2 days up to 2-4 possibly. It honestly depends on when you stop in and how many circuit boards are getting delivered that day. Contact us directly at support@nickstvs.com and let me know when you are thinking of stopping by and we can figure something out that works for everyone I am sure.
@@larryochoa982 The profile we use is irrelevant. You should NOT use that same profile. The profile you use depends on your tools, and environment. Unless you have the exact same tools we have, you use those tools in the exact same way we do, and have it in the exact same environment, then our profile won't work for you, or at least won't be ideal. I recommend you find your perfect profile through trial and error. And I don't mean trial and error on CPC4 modules, I mean buy broken boards that are similar in size and layer count for cheap, and practice with those, fine-tune your process, and make all the adjustments you need on boards you don't care about. Once you have your process refined, then go ahead and work on the CPC4 module.
Im in phoenix what is the turn around i can go to u? Reason i think my cpc is bad i try to connect to truck with a labtop to check codes for check engine and almost connects then disconnects
The turn around time currently is very fast as we are seeing lower demand for the repairs, but it would be best for you to contact us directly with the exact part number of your CPC module.
The size of the solder balls is 0.6mm but if you are asking this question it means you may not have the experience needed to properly fix this device yourself and I do not recommend you try it on your own. This is a very expensive irreplaceable item, you should not be experimenting with reballs on this device. You should be experimenting on cheap $20 boards. The odds are very high that you will damage the board beyond any possible repair over having a successful repair. I know the video makes it look easy and achievable but there are a lot of things we don't show you in the video. Please keep that in mind. We have had many technicians send us CPC4 modules with failed repair attempts. We are typically only able to fix 25% of those modules since they are often more damaged after the failed repair attempt. If you send us a none tampered board our success rate is 98%.
@@garrettellis7932 So far so good, we are able to repair most modules. I can't claim 100%, we had a few with some issues, but we are getting more equipment and tools so that we can tackle the more difficult repairs and increase our success rate.
Hello, Yes we service all versions and variants of the CPC4 modules including the one ending with 004. How fast do you need the service to be? Right now we are about 2-3 business day turn around time. We can do priority overnight return shipping with Fedex as well if needed. If you need faster, I can have someone come in during the weekend, and work overtime but I would have to charge extra. If you have any other questions, give us a call, or email us directly to our support@nickstvs.com email, we are able to answer questions much quicker there since we don't monitor TH-cam messages as often.
Sometimes you have to drive the truck around for a while and then it will start working. If you still have issues, you may have to get the device reflashed.
@@roymtz5375 Sorry I didn't see this comment until now. I don't get notifications on replies, only new comments. Reflashed means you get the software on the module erased and replaced with new software. Sometimes the CPC4 can go into a protection mode and stop working to "protect the vehicle" but even after you repair the fault, it stays stuck in that protection mode. The only way to get it out sometimes is to have the module reflashed.
You are very welcome! If you ever need to send in a unit or know someone that needs their unit fixed, let us know, we are still actively working on these and as always provide a 1 year warranty on the work.
Hello, We do a flat rate service for these, check out our new website, we sell refurbished and repair them for a flat rate www.freightlinercpc4repair.com
Hello, We have a flat rate repair for these, but we also have different prices based on how quickly you need it and if you want our default 1 Year warranty or if you want to get the extended 3-year warranty. Here is a link to our website with more information: nickselectronics.com/products/a0034461102-004/ If you have more questions, I would recommend emailing us directly or filling out the contact us form from our website.
@@melaninmone7316 You can either email us at support@nickstvs.com Or give us a call at (520)838-9359 but make sure to call us during business hours. Mon-Fri 9AM-5:30PM Arizona time.
@@abukaromar8179 Yes sir, we sure can! This is the link to one of the services we offer: www.nickstvs.com/store/p3119/A0034461002.html If this is not your exact version of the module, send me an email at support@nickstvs.com with your version and I can send you the link to your exact version.
Hello, As a rule, we encourage viewers never to get contact information from the comment section as it can have scammers impersonating us. Anyone can easily copy our name our logo and add a period or extra space in the name making it look like it's us answering and then provide you fake information to lead you to a scam site or virus. Always always get the contact info from the video description. Each one of our videos always has our official contact info in the description. You can also go to the youtube channel page and then select the about tab. Under there should be contact info and email addresses.
Have a CPC4 that needs repair? Fast turn around and 1 Year warranty:
nickselectronics.com/products/a0034461002-002
info@nickselectronicrepair.com
520-838-9359
Contact form on our website:
nickselectronics.com/pages/contact
I have a cpc4 that won’t start but when I press the chip it starts can you fix it?
@@manuelaguilar8466 Yes sir, that is most definitely one we can fix. For more details on our repair service, check the link below:
www.nickstvs.com/store/p3124/A0034461002.html
I have CPC4 for Freightliner cascadia which is not working, and I would like to ask you if I can bring it by my self then I can pay on the shop, or to pay when you finish the process before you ship it back to me. Thank you so much
@@hotsholife2545 Hello,
Sorry I did not see your comment earlier. I am unsure if you already have brought in your module in for repair, but yes absolutely that would be fine.
How much
After researching every option i decided to have Nick repair my cpc4. He was the most transparent and from these videos i could see he was also the best choice. I just got my cpc4 back today. Plugged it in and she fired right up. Thanks guys for getting me back to work.
Hey Joshua,
Thank you for leaving a comment, I appreciate that. I am glad we were able to help you get back on the road!
-Nick
You know I have seen alot of techs work on boards, but you definitely did a good job. You only applied heat where you needed and didn't drown the board in Flux.
Bro where you located at? I got a cascadia 2017 in salt lake sitting due to cpc
We are south of you down in Tucson AZ. 5445 E 22nd St 85714 to be exact.
Most of our customers are from out of town and mail in their modules for repair. I was just on the phone yesterday with someone in texas in the same situation, and he was told 6 months for the new module to come in so he is sending it to us for repair instead. We do 1-2 day turnaround time + shipping.
If you want more details, you can email me at support@nickstvs.com, give me a call at (520)838-9359 or you can check out our listing linked below as well.
www.nickstvs.com/store/p3119/A0034461002.html
hi,i have freighliner cascadia 2017,and no star,
ABS Light staying on
DEF Light staying on
Instrument Cluster loses communication,i check all fuses is good,so ,is that a CPC4 issue? can u fix it?
Hello Ming,
The symptoms you are describing are in line with CPC4 module failure but I can't guarantee that is 100% the case. I would recommend you have someone in person take a look at the truck, or swap out the CPC4 with someone elses to see if it takes care of the issue.
If you don't have one or can't find anyone you can borrow one from, then you can try heating or cooling the device gently and trying. If it makes a difference, then your CPC4 is the fault and has the common cracked solder joints issue. If it does not, then it can still be at fault and may simply have a different failure but would require further troubleshooting.
Thank you for showing me exactly what to do. We will now be your competition
If you are going to be a competitor, all I request is you make sure to do the job correctly, no short cuts, no throwing the board in an oven, otherwise it gives the repair industry a bad name.
@@NicksTVRepair and ask for a decent wage instead of undercutting till everyone’s barely getting by.
what is the name of your BGA station ?
I need to upgrade.
Thanks !
We got the ZM-R5860C Economical BGA rework station upgraded.
We bought it on Alibaba from Shenzhen Zhuomao Technology Co., Ltd.
They are the manufacturers of the machine and have really good quality products. This is not the lowest tier but it's second to lowest.
It sells for 2k but shipping is another $600 or so and the import tax is also about the same.
From my research it seems that this is usually the problem. However are the chips ever bad? Do you test them prior to the reball? My board has never been tampered with and I'm just making sure I'm not paying $1500 for a reball and it's not actually the issue with the cpc
Joshua,
So far out of all the modules we have fixed we have not yet found the processor to ever be bad. I know ERD says they replace them and that's the way to do it, but it is not needed at all since the processor itself doesn't go bad. We also offer a repair service, if we don't fix your CPC4 we would not charge you. We do live test and troubleshoot the module and confirm it to have a fault before and after. If necessary we bring it out to live test in a truck, but that is rarely needed.
@@NicksTVRepair i emailed you
@@joshuabrumback9681
Just got it! responding now
Do you need the vin number for proper programming?
Yes you do need the vin number
I had . My truck not start the other day broke down in my yard. Got it tow to freightliner my cpc was bad also
Did they have replacements available? Are you able to get it replaced?
If you aren't able to find one, let me know, we can fix your bad one. If you are able to find a repalcement, can you let me know from where?
I know a few people that contacted me saying their CPC4's got stolen out of their trucks and they asked if I had any for sale. If I can point them to someone, that would be great. They aren't able to pay eBay scalper price though.
Good job
Thanks
This guy save truck industry! 👍！
Thank you for saying that!
We are trying!
Hey I believe my Cpc is my problem it’s throwing abs codes and not showing gear on dash, when abs codes are gone truck goes into gear. Can you fix this?
Yes this is a common fault with the CPC modules and of course, yes we can fix that no problem.
If you want to send in the module for repair, you can send it directly to our storefront
ATTN: Nick's TV repair
5445 E. 22nd St Suite 117
Tucson, AZ 85711
Please don't send the module without providing all of your information. We get a lot of repair requests, so PLEASE provide your first and last name, phone number, email address, and preffered return shipping address on a paper attached with the module, like that we know exactly who it belongs to when we get it, and we can easily get in contact with you if we have questions or need to communicate with you.
If you have questions, give me a call at (520)838-9359 or email at support@nickstvs.com
I am availble and can answer any questions you have.
What BGA machine and adapter would you recommend for this that's relatively small?
I really should get paid to promote them at this point. Here is their entry level BGA rework machine
www.alibaba.com/product-detail/Seamark-ZM-R5830-Entry-cheap-bga_1600487363616.html
This is Seamark their company name is Shenzhen Zhuomao Technology.
That is their entry level machine, and while we did get a fancier version of it, I think it's all bells and whistles and their basic model is just as good.
@@NicksTVRepair Thank you! I was overwhelmed with the amount of BGAs out there and which to choose. This will definitely work for my needs.
@@245artist You are welcome.
Yeah, we have bought about 3 -4 different types of BGA machines in the past and have found them to be the best by far both in terms of how their machines operate, their designs, and quality of parts used.
Good luck
Hi I'm having a cpc4 problem. I was told the unit had power but it's not sending power to the rest of the truck. I tried driving it to freightliner it took me about an hour to get there and I'm less than 25 minutes away. Is that something you can fix?
Hello,
Yes that does sound like a common CPC4 failure which we have serviced and fixed many times.
Are you local to Tucson?
If so you can just drop it off at our local shop
5445 E. 22nd St Suite 117
Tucson, AZ 85711
Wish I heard of u guys 6 months ago 😓
Well we plan on being around for a very long time, so if you ever have any electronics repair needs, let us know, we are starting to expand our work into the automotive, commercial vehicles, including tractors and construction equipment.
Where I can send my cpc4 frieghtlener Cascadia 2016 to be fix?
Hello,
Our shop address is below:
5445 E. 22nd St Suite 117
Tucson, AZ 85711
If you have questions, you can contact us by phone or email
(520) 838 - 9359
support@nickstvs.com
I had a freightliner the other day with inlet outlet nox sensor codes. Ran two forced regens with my computer and Replaced both sensors and the code still came back is that because the CPC?
I don't think so. I have fixed a lot of CPC modules and I have never seen any cause that issue before. With that being said, I can't know for sure. I would recommend just bringing it to a shop, they would be able to better assist you. If it is a CPC4 failure however, it is most likely due to cracked solder joints between the processor and the PCB which is a failure that would be fixed with the reball repair service we offer.
Do you use .065mm or .06mm balls?
I am sorry but I have to be harsh here. if you do not know how to identify the size of the solder balls on the module, then you most likely do not have the experience required to work on these.
We have gotten dozens of tampered boards from reflow and reball attempts gone wrong and have made dozens of boards none repairable because of it. Lots of truckers are sidelined because they tried to get someone else to reball their board for cheaper and they couldn't do it right.
Please unless you have lots of experience, do not try and reball this board. If you have no experience, this is not the type of board that you should use to learn how to reball.
People's livelyhoods depend on these modules, and if the work is not done right, you will most likely cause more damage to the board.
If you are truly interested in learning to reball, then learn on cheap affordable and readily available electronics.
After the repair and installation needs to be reprogramming?
Hello,
It depends on the problem. Most of the time no you don't need to have it reprogramed, but sometimes yes.
If you are looking to have one fixed, we have fixed hundreds and can help you with yours. Send us an email directly or fill out the contact form that is linked in the video description.
How much you charge more or less 🤔
@@outlanderkid6524
We don't put prices on our TH-cam channel, you have to click on the link in the video description. Prices can change depending on market conditions, demand, and how busy we are.
The best way to get our current prices is by going to our website. I also have the website link pinned in a comment at the top as well.
Im in california can i take it to you for a repair? Is it a same day repair or takes longer? Hopefully you can help me
We try to do same day, but we have been getting a lot of repair requests. More than we can handle in fact. So we may increase our advertised turn around time from 1-2 days up to 2-4 possibly. It honestly depends on when you stop in and how many circuit boards are getting delivered that day. Contact us directly at support@nickstvs.com and let me know when you are thinking of stopping by and we can figure something out that works for everyone I am sure.
What profile do you use to remove and replace the tc1796?
@@larryochoa982 The profile we use is irrelevant. You should NOT use that same profile. The profile you use depends on your tools, and environment.
Unless you have the exact same tools we have, you use those tools in the exact same way we do, and have it in the exact same environment, then our profile won't work for you, or at least won't be ideal.
I recommend you find your perfect profile through trial and error. And I don't mean trial and error on CPC4 modules, I mean buy broken boards that are similar in size and layer count for cheap, and practice with those, fine-tune your process, and make all the adjustments you need on boards you don't care about.
Once you have your process refined, then go ahead and work on the CPC4 module.
Im in phoenix what is the turn around i can go to u? Reason i think my cpc is bad i try to connect to truck with a labtop to check codes for check engine and almost connects then disconnects
The turn around time currently is very fast as we are seeing lower demand for the repairs, but it would be best for you to contact us directly with the exact part number of your CPC module.
What solder balls did you use like the .mm
The size of the solder balls is 0.6mm but if you are asking this question it means you may not have the experience needed to properly fix this device yourself and I do not recommend you try it on your own. This is a very expensive irreplaceable item, you should not be experimenting with reballs on this device. You should be experimenting on cheap $20 boards.
The odds are very high that you will damage the board beyond any possible repair over having a successful repair.
I know the video makes it look easy and achievable but there are a lot of things we don't show you in the video. Please keep that in mind.
We have had many technicians send us CPC4 modules with failed repair attempts. We are typically only able to fix 25% of those modules since they are often more damaged after the failed repair attempt. If you send us a none tampered board our success rate is 98%.
Could I send you my cbc4? And how much you charge?
Hello,
For more information you can check out our listing linked below
www.nickstvs.com/store/p3119/A0034461002.html
How did the repair go?
@@garrettellis7932 So far so good, we are able to repair most modules. I can't claim 100%, we had a few with some issues, but we are getting more equipment and tools so that we can tackle the more difficult repairs and increase our success rate.
Hello mine says 004 would you be able to fix it? And do you offer a faster turn around?
Hello,
Yes we service all versions and variants of the CPC4 modules including the one ending with 004.
How fast do you need the service to be? Right now we are about 2-3 business day turn around time. We can do priority overnight return shipping with Fedex as well if needed. If you need faster, I can have someone come in during the weekend, and work overtime but I would have to charge extra.
If you have any other questions, give us a call, or email us directly to our support@nickstvs.com email, we are able to answer questions much quicker there since we don't monitor TH-cam messages as often.
Afte re install my cpc my miles no work Any wire Lise if 2018 freaghtliner cascades manual
Sometimes you have to drive the truck around for a while and then it will start working.
If you still have issues, you may have to get the device reflashed.
@@NicksTVRepair asking nick, what is reflashed?
@@roymtz5375 Sorry I didn't see this comment until now. I don't get notifications on replies, only new comments.
Reflashed means you get the software on the module erased and replaced with new software.
Sometimes the CPC4 can go into a protection mode and stop working to "protect the vehicle" but even after you repair the fault, it stays stuck in that protection mode. The only way to get it out sometimes is to have the module reflashed.
Thank you
You are very welcome! If you ever need to send in a unit or know someone that needs their unit fixed, let us know, we are still actively working on these and as always provide a 1 year warranty on the work.
how much to repair cpc $ ?
Hello,
We do a flat rate service for these, check out our new website, we sell refurbished and repair them for a flat rate
www.freightlinercpc4repair.com
What this machine name ??
BGA rework station
How much to repair CPC4
Hello,
We have a flat rate repair for these, but we also have different prices based on how quickly you need it and if you want our default 1 Year warranty or if you want to get the extended 3-year warranty.
Here is a link to our website with more information:
nickselectronics.com/products/a0034461102-004/
If you have more questions, I would recommend emailing us directly or filling out the contact us form from our website.
Can we send our cpc to get repair we can send it to u
Hello,
Yes you can send your CPC4 module for repair. We are still actively servicing those at this time.
I’m calling you guys in the morning
@@melaninmone7316
You can either email us at
support@nickstvs.com
Or give us a call at
(520)838-9359 but make sure to call us during business hours. Mon-Fri 9AM-5:30PM Arizona time.
You’re too good
Good sir, we do try our best and we do appreciate your admiration and feedback.
Could you please repair my cpc4
@@abukaromar8179 Yes sir, we sure can! This is the link to one of the services we offer:
www.nickstvs.com/store/p3119/A0034461002.html
If this is not your exact version of the module, send me an email at support@nickstvs.com with your version and I can send you the link to your exact version.
Tengo una dañada
Had to pay a $500 deductible
For the diagnostic of the truck?
Whats your email
Hello,
As a rule, we encourage viewers never to get contact information from the comment section as it can have scammers impersonating us. Anyone can easily copy our name our logo and add a period or extra space in the name making it look like it's us answering and then provide you fake information to lead you to a scam site or virus.
Always always get the contact info from the video description. Each one of our videos always has our official contact info in the description. You can also go to the youtube channel page and then select the about tab. Under there should be contact info and email addresses.
@@NicksTVRepair Good Info Nick,