This is genius! Thank you so much because I'm not the best at making crepe paper rosettes. Oh, I love my Cuttlebug too and was HOT when Cricut stopped making the cutting plates. Now I get mine from Ali. 3mm is the B plate, 5mm is the C plate. They work well enough for me. ❤ Because of your video I think I'll need to order more! 😂
You just made me aware that I have been missing the largest center circle. I ordered it right before the pandemic and didn’t notice it brought 3 until now. Your rosettes are super cute. TfS.
Love love !!!! Ufffffff anything you make comes out so dang cute !! Did you make smaller pins than these ? I could have sworn i saw small itty bitties. TFS !!
Isn't that funny, I love my cuddlebug also. I have the Gemini Jr, but find I use my Cuttlebug most. Thank you so much for sharing this. I tried making the Rosettes with the crepe paper and couldn't do it.
I love my cuttlebug too and was disappointed when they stopped making it and the supplies to go with it. BUT I found that the 6x9 (approximately) and 1/8" thick self healing mat works as a replacement for the B plate. smile.amazon.com/dp/B07TVLCX1V/?coliid=I2UBURM42NKY1&colid=13YS6YB234OOY&psc=1&ref_=lv_ov_lig_dp_it -- this is one example that should work. Couldn't find the exact one I bought but I believe as long as it is 1/8" thick it should work fine. And they are a lot cheaper than the B plates.
Thank you for sharing your tips on how to make crepe paper rosettes. I will definitely give this a try. 😀❤️
What a terrific idea! These are super cute, and I will be borrowing this idea.
I cannot make crepe rosettes. These rosettes are pretty. Will have to try. Thanks for your tutorial. It’s great!
So cool! I love crepe rosettes but am horrible making them by hand.
Thanks for sharing.
Absolutely love this idea Bona! Tfs
Excellent tutorial. Cannot wait to go make some.
💖💖💖this clever idea and will definitely be trying it! Tfs🤗💖
Super cute! Love the way they look🙌🏻
Those are beautiful!!
Love it Bona!
Such a great idea.
The rosettes you made are gorgeous thank you for the tutorial
Awesome inspiration.. TFS!!
Yay! You're so amazing, thank you for the tutorial & inspiration. The rosettes turned out so cute 😍
Very nice! I wondered how these were made. Great tutorial
Adorable!!
This is genius! Thank you so much because I'm not the best at making crepe paper rosettes. Oh, I love my Cuttlebug too and was HOT when Cricut stopped making the cutting plates. Now I get mine from Ali. 3mm is the B plate, 5mm is the C plate. They work well enough for me. ❤ Because of your video I think I'll need to order more! 😂
Omg! Thank you so much! I will definitely check Ali out. Tfw!
Great idea Bona ... tfs!
Hey Bona I noticed that your hot glue gun doesn't drip. I have that brand and mine drips like there's no tomorrow! What type of glue stick do you use?
Hi Hon! I use the Surebonder glue sticks.
Thank you for this tutorial. I also cannot make the crepe paper rosettes, but I am certainly going to try it this way!
Awesome idea! Thank you for the tutorial. Hugs
So genius!! I love it.
Love this so much
This is so cool .. yesterday I was making this but using only 1 sheet of crepe paper and today you’re showing this.. gonna try this..TFS
Beautiful rossettes
Thank you for the tutorial ❣ They are so cute! Now I can finally use up my crepe papers!! 😁
You just made me aware that I have been missing the largest center circle. I ordered it right before the pandemic and didn’t notice it brought 3 until now. Your rosettes are super cute. TfS.
I’m going to try these!
TFS
Betty
This is awesome! Thank you for the video!
Neat idea. TFS
Bona do you remember where you got the die from been searching everywhere for it thanks for the tutorial..Barbara
Hi Barbara! I believe it was Amazon.
Not a 100% positive but i think its been discontinued.
Tfs!! Now I have to try and find these dies!!
Love these! Which button maker do you use?
Thank you! I have the Tecre from ButtonBoyInc. Tfw!
Love it so cute...tfs
Try Temu for the plates. I pretty sure that them have them.
Do they not sell this die set anymore? I can't find it with a google search.
Bona, did you have to print the papers for your flair buttons?
What did you peel off the back of your flair button to get that made it stick to the rosette?
Glue Dots
Hi, by chance do you have a link for the die plates on Aliexpress? Please.. Thank You in advance..
I bought the B plate from an Etsy seller and she just had the one. I wished there were more.
So cute, very difficult to see with black paper and a black background, tfs.
New subscriber coming from pitsomeblindonit., thank for sharing ❤
Great rosettes! But using black crepe paper on your black Cutting board makes it a bit difficult to see everything your doing.
By any chance do you know where I can buy the Rosette dies?
I checked a few places and it’s either sold out or discontinued.
@@LiveLoveScrap Thanks. I really wanted that die. If by any chance you see it available send me a message if you can and let me know. Thanks
JovyCreates Definitely
@@LiveLoveScrap Thank you
If anyone has an extra rosette die set let me know please! I can’t find these dies! ♥️
Love love !!!! Ufffffff anything you make comes out so dang cute !! Did you make smaller pins than these ? I could have sworn i saw small itty bitties. TFS !!
No, these 1” are the smallest size I have.
@@LiveLoveScrap Thank you!!
Isn't that funny, I love my cuddlebug also. I have the Gemini Jr, but find I use my Cuttlebug most. Thank you so much for sharing this. I tried making the Rosettes with the crepe paper and couldn't do it.
Genius
Thank you for sharing. These are awesome; but no more B plates! 😢😢😢😭 So sad to hear. My cuttlebug has been with me from the start.
Thanks for sharing!!!! :)
I need to get this die! I've been doing my flowers by hand, ugh!
I love my cuttlebug too and was disappointed when they stopped making it and the supplies to go with it. BUT I found that the 6x9 (approximately) and 1/8" thick self healing mat works as a replacement for the B plate.
smile.amazon.com/dp/B07TVLCX1V/?coliid=I2UBURM42NKY1&colid=13YS6YB234OOY&psc=1&ref_=lv_ov_lig_dp_it
-- this is one example that should work. Couldn't find the exact one I bought but I believe as long as it is 1/8" thick it should work fine. And they are a lot cheaper than the B plates.
Thank you so much! Tfw!
Thank you!