Thank you sir, my father spent half a day watching all of this on his small phone, redrawing every step of this video, with every single detail. He asked me to save this video for him, he doesn’t get what youtube is. He suffered from motorcycle accident 2 years ago and doesn’t feel his feet, but he spends most of his free time in his little garage and makes things for garden, cars and tools, despite walking with canes. You brought him inspiration and joy. Salute.
Probably the best DIY project I have seen on TH-cam. The design and construction was excellent. Yes, there are alterations that could be made, but he achieved what he set out to build, and it works. Tradesman.
You have more common sense and usable work knowledge than most people I know. And, that is one bad ass tool you built. I like those guides. Thanks for posting this video.
Check out Donn DIY, he has built some stuff with scrap metal that he cleans up to new condition and the builds trailers and brush hogs and his band saw mill is better than wood mizer's saw mill
Love it. Innovative and resourceful. It is great when someone takes something that is no longer useful for its original design and gives life to something new.
Un proyecto impresionante,a falta de dos manos de pintura ,quedó como de fábrica y reciclando las ruedas,genial un saludo y un like desde Naron(Galicia)
Very well done. Consider placing a guard at the front of the saw blade just above the guide bearings. This would prevent accidental touching OR should anyone stumble they will not get in contact with the moving blade.
A man uses his hand is a labourer, a man uses his hand and brain has a workmanship,but a man uses his hand ,Brain and heart is an artist..job well done sir..
really well done! Just one hint: you should better create a housing around your bandsaw for safety in case the band will break unexpectedly, then it's perfect!
A very very fine craftsman I know lopped 4 fingers of his hand when the bandsaw blade he was using broke. Pinky all the way angling up to the 1st digit of his index finger. The other 2 in that diagonal line. They reattached them, but he used to tell me when it was cold outside, if I ever lose cut my fingers off, toss them in the trash can, cause his hurt all the time. I think he was just complaining cause they hurt. I always thought I'd rather have 4 pain ridden fingers than no e at all. Crazy scar he's got too. I know another guy lost all fingers on both hands minus thumb and Pinky. Always Hawaii time for that man. That was in a winch on a dozer. His fingers were not savable. He gets by. Not on welfare. Drives a wrecker. Don't grab a winch cable too close to the drum, and ask the inexperienced guy on the machine to let line out. He might let the cable in on accident, and bring your fingers or more with it. Grab that thing as far away from that drum as possible. So you have more than plenty of time to drop that bitch before it can eat your hands. Machines have zero empathy, or conscious. They will eat you up, like you weren't even there, and just continue on with zero fucks given. They are awfully handy to have around, but don't expect an apology when you stick your head, or han in her mouth, and the bitch bites you, chews you up, and keeps on pushing. Company gal, she eats while working. Only stopping for some lube, or fuel. I know another girl that had a terrible incedent with one of those mechanical penis tools. It was bad. Caused major mental issues, broke up her marriage, kids got hearts broken, she only wants that machine now. It dont care how heavy she gets, it has a job to do, it damn fuckíng well does it with many fucks given
WOWWWWW Congratulations young man, you have great talent and skill, your video came to me here in Brazil. You shone in your step by step. God bless you.
Thought of this several years back....and EVERYONE seemed to say it would be dangerous and cost more than just buying one with a warranty.... now... I don't have a welder....BUT.... now that I see that it IS possible.... I may just get around to doing it. Thanks for doing what others told me not to! 😊
К сожалению не могу прочесть комментарии. За работу однозначно РЕСПЕКТ!!! Основательный подход, ювелирная работа, лёгкое, даже изящное владение инструментами. Просто красиво! Но есть технические вопросы. Почему так много сварки? При возможной поломке сварку придется резать. Может лучше было бы частично собрать узлы (или модули) на резьбах? Шкив на двигателе из чего сделан? Если это текстолит или углеволокно - тогда да, но очень похоже на дерево. Прижимные подшипники для ленты. Видел дважды такие пилы, тоже в сарае сделаны. Так вот под кулисами прижимных подшипников стоят короткие но достаточно мощные пружины. Станок работает гораздо тише и звук мягче. Это так мысли вслух. Но всё равно повторюсь За работу однозначно РЕСПЕКТ! 👍👏🤗
na inspire ako sayo sek noun pa kaya nag vlog na rin ako pero mga simpleng gawain lang. hahahaha. daan ka naman sa bahay ko para makita mo idol. salamat.
Ну красавчик!! Так и есть Красаучек!! Уделал всех производителей ленточек на раз два!! Просто,элементарно,из говна и палок так сказать!! Респектище огроменный!!
Naka2x bilib bro, Ang bata mupa ngunit dami mong alam. Kaya pala ng pinoy.. Mahilig din ako nyan, but ang layo ko sa idea at ingenuity mo. Applicable sa pinoy na low budget. Sana you sell your plans para maka gawa din ako.. Kaya ko nman gayahin yan base sa pinakita sa video pero mas madali kung my dimensions at itemize materials used. More power. Ikaw na idol ko next to Wendel Mathias.
PLEASE MAKE TIME TO READ!!!!!!!! To avoid overexposure to galvanize fumes, you should have proper ventilation and avoid direct contact with zinc oxide fumes. Welders who have many years of experience also recommend drinking milk before, during and after welding galvanized steel to lessen your risk of galvanize poisoning. You may also want to purchase a welding hood fit for welding galvanized steel.
It’s called welders fever. The milk drinking thing is an old wives tale and proper ventilation while wearing a respirator is a must while dealing with anything galvanized. I strongly suggest not ever welding anything galvanized if you care about your mental health over the long term. This is bad stuff and being in the same area, even outdoors, this stuff can poison you.
Nice project. Just a note about welding galvanized steel. Grind away the zinc plating first if possible, and do not breathe the welding fumes as they are very toxic. A well ventilated area is good.
Thank you sir, my father spent half a day watching all of this on his small phone, redrawing every step of this video, with every single detail. He asked me to save this video for him, he doesn’t get what youtube is. He suffered from motorcycle accident 2 years ago and doesn’t feel his feet, but he spends most of his free time in his little garage and makes things for garden, cars and tools, despite walking with canes. You brought him inspiration and joy. Salute.
Que linda história
Hope he is fine brother. Very inspiring!
Thank you sir, can you tell me the motor types and Ph?
Probably the best DIY project I have seen on TH-cam. The design and construction was excellent. Yes, there are alterations that could be made, but he achieved what he set out to build, and it works. Tradesman.
You have got to be the best home shop fabricator on TH-cam. Keep up the good work.
จค
the best DIY project I have seen on TH-cam
You have more common sense and usable work knowledge than most people I know. And, that is one bad ass tool you built. I like those guides. Thanks for posting this video.
Check out Donn DIY, he has built some stuff with scrap metal that he cleans up to new condition and the builds trailers and brush hogs and his band saw mill is better than wood mizer's saw mill
Certainly the best diy band saw on YT 👍
Amazing work. Thanks for sharing your skills and craftsmanship.
Your work is very good. You are a person full of charity.thank you
Love it. Innovative and resourceful. It is great when someone takes something that is no longer useful for its original design and gives life to something new.
i was so inspired by your project i built a metal cutting bandsaw and a wood cutting bandsaw i will have to post a video of them in the near future.
Un proyecto impresionante,a falta de dos manos de pintura ,quedó como de fábrica y reciclando las ruedas,genial un saludo y un like desde Naron(Galicia)
Brilliant...dont see why people dont appreciate it
Ayos yung idea mo sa puleya. thumbs up bro 👍👍👍
ayaw nga ma welding e haha
hehe pareho nung ginawa ko na belt sander ayaw din ma welding yung puleya nung motor pundido kasi heehheeh😅
yung sa puleya na gawa sa kahoy ganda ng pag kkagawa mo bro
Good think! All sample and effective 👍👍👍.
I hope my daughter won't missed her bike...
Thanks for the idea
Haha true.
Yea I might steal me a bike tonight.
Your videos are amazing, very detailed instructions for viewers, very helpful for all those who need to learn creativity
Very well done. Consider placing a guard at the front of the saw blade just above the guide bearings. This would prevent accidental touching OR should anyone stumble they will not get in contact with the moving blade.
A man uses his hand is a labourer, a man uses his hand and brain has a workmanship,but a man uses his hand ,Brain and heart is an artist..job well done sir..
Very wonderful work and all respect
Great work thanks very much for your sharing, Greetings to you from Algeria 🇩🇿
really well done! Just one hint: you should better create a housing around your bandsaw for safety in case the band will break unexpectedly, then it's perfect!
A very very fine craftsman I know lopped 4 fingers of his hand when the bandsaw blade he was using broke. Pinky all the way angling up to the 1st digit of his index finger. The other 2 in that diagonal line. They reattached them, but he used to tell me when it was cold outside, if I ever lose cut my fingers off, toss them in the trash can, cause his hurt all the time.
I think he was just complaining cause they hurt. I always thought I'd rather have 4 pain ridden fingers than no e at all. Crazy scar he's got too. I know another guy lost all fingers on both hands minus thumb and Pinky. Always Hawaii time for that man. That was in a winch on a dozer. His fingers were not savable. He gets by. Not on welfare. Drives a wrecker.
Don't grab a winch cable too close to the drum, and ask the inexperienced guy on the machine to let line out. He might let the cable in on accident, and bring your fingers or more with it. Grab that thing as far away from that drum as possible. So you have more than plenty of time to drop that bitch before it can eat your hands. Machines have zero empathy, or conscious. They will eat you up, like you weren't even there, and just continue on with zero fucks given. They are awfully handy to have around, but don't expect an apology when you stick your head, or han in her mouth, and the bitch bites you, chews you up, and keeps on pushing. Company gal, she eats while working. Only stopping for some lube, or fuel. I know another girl that had a terrible incedent with one of those mechanical penis tools. It was bad. Caused major mental issues, broke up her marriage, kids got hearts broken, she only wants that machine now. It dont care how heavy she gets, it has a job to do, it damn fuckíng well does it with many fucks given
Du super travail !!! Bravo !
Tolle Arbeit !!! Bravo !
Great work !!! Well done !
I bow to the young master and inventor!
With a basic tools you can do this. It is very smart man. Good Job!!!
Wow galing naman nyan!
Apu mu
The best handmade tool bro...👍👍👍
Thanks
@@SekAustria sir pwede po magpagawa sa inyo ng belt sander,saan po location nyo para mapuntahan ko kayo pls.po
Good job guyz,nice work..
Beautiful design, and build. Don't forget to do part two showing how you made and installed the blade guards. Thanks for sharing!
Very nice good job
WOWWWWW Congratulations young man, you have great talent and skill, your video came to me here in Brazil. You shone in your step by step. God bless you.
Wow that thing came together well👍👌
Amazing result. i'm surprised that no one thought to use bicycle wheels before; it's perfect.
Bloody awesome 👏 work mate this is my kind of band saw👍
WOw.i.watching.everyday.I.like.so.much.
gosto muito dos seus videos porque você não fica falando nem enrolando nem pedindo like. continue assim!
Thought of this several years back....and EVERYONE seemed to say it would be dangerous and cost more than just buying one with a warranty.... now... I don't have a welder....BUT.... now that I see that it IS possible.... I may just get around to doing it. Thanks for doing what others told me not to! 😊
Excellent work 👍👍
Amazing. I like your work. I am from indonesia
К сожалению не могу прочесть комментарии.
За работу однозначно
РЕСПЕКТ!!!
Основательный подход, ювелирная работа, лёгкое, даже изящное владение инструментами.
Просто красиво!
Но есть технические вопросы.
Почему так много сварки? При возможной поломке сварку придется резать. Может лучше было бы частично собрать узлы (или модули) на резьбах?
Шкив на двигателе из чего сделан? Если это текстолит или углеволокно - тогда да, но очень похоже на дерево.
Прижимные подшипники для ленты. Видел дважды такие пилы, тоже в сарае сделаны. Так вот под кулисами прижимных подшипников стоят короткие но достаточно мощные пружины. Станок работает гораздо тише и звук мягче.
Это так мысли вслух.
Но всё равно повторюсь
За работу однозначно
РЕСПЕКТ!
👍👏🤗
Nice bro ang galing. iba talaga tumirada ang mga pinoy.
Good job brother. You are genius young man..
Its So Wonderful to build bandsaw very nice bro
Clever! Love your homemade tools.
Great work and useful bandsaw thanks man
Great video
I personally liked th background sounds over music
Thanks for sharing
Just plain cool, dude....love your rooster.
un oh nice one sek.
Wow keren mas, disekitar kita juga byk bahan2 ya terima kasih idenya
Muy buena el trabajo tanto lo busque pero al fin lo tengo lo haré mi amigo gracias felicidades por compartir muchas gracias por tu trabajo .
wow great idea to use a bicycle disc as a saw wheel ... thanks for the idea i'm watching it from you
Sek Austria
Good Idea !!!
Парень молодец,настоящий кабардинец !
Уей сыбгъэдыхьэшхам )))
Нlытlэ адыгэлlкъэ нэгъасауэ!
Арам уей! Адыгэм къэмыгупсысын щы1э!
Fantastic work, dude! Great idea!!! 😃
👍👍👍👍👍👍👍👍толковая работа!!!!!!Удачи,тебе,самоделкин!!!!!!
great video great machine
Galing pre, gayahin ko yan ha... pyesa ng. bike.. panalo.. murang mura
This is so awesome. Great build
Das da noch alle Finger dran sind🙈aber sehr gut gemacht👍
Nise work
But be careful welding galvanized verry dangers use fan when you welding
Good luck
bilib talaga ako sayo sek lagi ko sinusubaybayan mga vids mo keep up the good works!
muy buena idea y bien echa la sierra , saludos desde ARGENTINA
아재는 진정한 기술자 이십니다.
한개 만들어서 파소!
아재요 . 인전제인!
wow galing talaga idol, nuon ko pa gusto magkaron nyan. dko alam pano gawin. hahaha. nakakabilib ka sek. if you still remember me fan moko nuon pa.
na inspire ako sayo sek noun pa kaya nag vlog na rin ako pero mga simpleng gawain lang. hahahaha. daan ka naman sa bahay ko para makita mo idol. salamat.
Haha sige bro kapag may time. Goodluck sa career mo bro godbless you
Excellent job, you have good power of imagination, I enjoyed watching it. Thanks for sharing
Hola como estas yo lo felicito es una cazadora que se be que quedó.muy buena quisiera que me enviarlas las medidas
Ну красавчик!! Так и есть Красаучек!! Уделал всех производителей ленточек на раз два!! Просто,элементарно,из говна и палок так сказать!! Респектище огроменный!!
Hi.. Real nice job on the band saw!
Super Idee , Und Toll gemacht Genial. Würde gerne diese Bauanleitungen haben.👍
COMO SIEMPRE ESPECTACULAR!!!!! 👏👏👏👏 SALUDOS DESDE 🇦🇷
EXCELENT MAN... CONGRATULATIONS FOR A GOOD WORK!
good job man i think will make one for my self
Trimakasih Atas ilmunya. Smoga banyak manfaat. Kokonya Berkah slalu
This is really beautiful. Hats off!
Killer! I have been planning on making one myself and wondering if it would work. Now I know and I can begin.
Nice
A Man that uses his head and does the stuff !
Excelente trabajo!!!
Felicitaciones!!!
Naka2x bilib bro, Ang bata mupa ngunit dami mong alam. Kaya pala ng pinoy.. Mahilig din ako nyan, but ang layo ko sa idea at ingenuity mo. Applicable sa pinoy na low budget. Sana you sell your plans para maka gawa din ako.. Kaya ko nman gayahin yan base sa pinakita sa video pero mas madali kung my dimensions at itemize materials used. More power. Ikaw na idol ko next to Wendel Mathias.
Haha salamat bro pero malayo na agwat ni wendel mathias.
😂😂😂 یعنی صفر تاصد رو خودت ساختی ، حتی تیغه !!! آفرین به تو همکار عزیز
Hombre, no dejas de sorprenderme con tus maravillosas habilidades. Felicitaciones desde México.
Excellent work. Well done.
Parabéns, adorei ver seu trabalho, quanta habilidade e criatividade!
Abraço aqui do Brasil
Неплохо для столярки незаменима респект тебе и уважение 👍👍👍👍👍🍺!
Muito bom, gostei muito dessa serra fita, farei uma pra mim baseada na sua, parabéns meu irmão, você é muito inteligente e caprichoso!
Gran bel lavoro. Complimenti
Great idea
Love it. Very resourceful
PLEASE MAKE TIME TO READ!!!!!!!!
To avoid overexposure to galvanize fumes, you should have proper ventilation and avoid direct contact with zinc oxide fumes. Welders who have many years of experience also recommend drinking milk before, during and after welding galvanized steel to lessen your risk of galvanize poisoning. You may also want to purchase a welding hood fit for welding galvanized steel.
DAS DAS
It’s called welders fever. The milk drinking thing is an old wives tale and proper ventilation while wearing a respirator is a must while dealing with anything galvanized. I strongly suggest not ever welding anything galvanized if you care about your mental health over the long term. This is bad stuff and being in the same area, even outdoors, this stuff can poison you.
Amazing. I like your work
Good and Best work thanks for scharing mr
Nice project. Best regards from Brazil.
Looks to be working well. I hope you build some covers for safety.
i like your idea....good work man...
Good job man
It's good to see fellow Filipino doing some very good work. Great ideas Sir Sek, keep it up.
Nice project. Just a note about welding galvanized steel. Grind away the zinc plating first if possible, and do not breathe the welding fumes as they are very toxic. A well ventilated area is good.
He is wearing breathing mask
BHZ Motovlog that’s a dust mask not an aspirator
Leave the ends of the tubes soaking in vinegar for 48 hours or so because there is zinc inside the tubes as well as outside!
Awesome Work. Greetings from Venezuela.
Muy bien excelente amigo ingenioso felicidades bendiciones saludos desde el salvador
A machine was made from garbage. Great! The main thing is that the machine works.
good!! 아이디어 좋네요!!
Hey! Eres un grande! Gracias desde Argentina!