Hi Craig, the Aussie Traveller site says the sail track is 6mm. I am thinking of getting the keder replaced on my side walls before the kit arrives, did the 7.5mm you say in the video fit fine or was it actually 6mm? Cheers mate!
Consult with your canvas repairer. My guy advised me that there is only two standard sizes used in Australia. He also mentioned that what is commonly referred to as 6mm is actually 7.5mm (something to do with 6mm core wrapped in the canvas cover makes it 7.5mm) I didn’t get into it in detail since he was the canvas expert and I had the anti flap bar with me so he showed me that it fit. Run it past your canvas person and if there’s any confusion, then feel free to message me and I’ll get a physical measurement off ours for you 👍
Hi Guys, Did you purchase your vent covers separately or did they come with the camper (the one i can see on the door)? I have a different van but like those covers.
It would be great if you knew what you are doing. As your Awning roll is in the wrong where you have drilled your Holes .As the way you are set up your Awing at the ends will start to tare as your rafters are pulling down on the ends .As you have created a gutter .You have AT Kit. That has been fitted wrong to Awning Roll.
Using the original holes from the manufacturer which I did not drill. You are correct though, I hadn’t allowed the roller to back off a bit. When I do that, the AF bar lifts to a better position and the gutter disappears. It’s just over extended in the video but thanks for your input
Hi Brad, Aussie Traveller is the brand name so google will possibly turn up more results, but we bought ours direct from Aussie Travellers website aussietraveller.com.au/collections/anti-flap-kit
Aussie Traveller Anti Flap Kits and accessories - aussietraveller.com.au/collections/anti-flap-kit
Barossa Offroad (canvas mods) - barossaoffroad.com.au/camper-trailer-canvas-service-repairs/
Any one in the Albury Wodonga area, we went to Universal Upholstery for the changes to our canvas to fit the Aussie Traveler anti flap bars.
Thanks for sharing 🥰
Great video! Can i ask what Curved roof bar you purchased and length?
Thanks 🍻
We purchased the “Mini Rafter (#2)” it comes in 1 standard length and fits well 👍
We did the same thing with the one supplied.
Best decision ever 🥰
Hi Craig, the Aussie Traveller site says the sail track is 6mm. I am thinking of getting the keder replaced on my side walls before the kit arrives, did the 7.5mm you say in the video fit fine or was it actually 6mm? Cheers mate!
Consult with your canvas repairer. My guy advised me that there is only two standard sizes used in Australia. He also mentioned that what is commonly referred to as 6mm is actually 7.5mm (something to do with 6mm core wrapped in the canvas cover makes it 7.5mm)
I didn’t get into it in detail since he was the canvas expert and I had the anti flap bar with me so he showed me that it fit.
Run it past your canvas person and if there’s any confusion, then feel free to message me and I’ll get a physical measurement off ours for you 👍
Hi Guys,
Did you purchase your vent covers separately or did they come with the camper (the one i can see on the door)?
I have a different van but like those covers.
Hey Andrew, the vent covers were standard accessories with the StarVision camper
It would be great if you knew what you are doing. As your Awning roll is in the wrong where you have drilled your Holes .As the way you are set up your Awing at the ends will start to tare as your rafters are pulling down on the ends .As you have created a gutter .You have AT Kit. That has been fitted wrong to Awning Roll.
Using the original holes from the manufacturer which I did not drill. You are correct though, I hadn’t allowed the roller to back off a bit. When I do that, the AF bar lifts to a better position and the gutter disappears. It’s just over extended in the video but thanks for your input
Where are these sold please
Hi Brad, Aussie Traveller is the brand name so google will possibly turn up more results, but we bought ours direct from Aussie Travellers website aussietraveller.com.au/collections/anti-flap-kit
@@AusCamping thanks again