In today's episode i'm gonna build a classic coffin smoother with unknown patent to adjusting the mouth. Seat back, relax and enjoy the video :) BTW Check the timeline - i'm gonna cut the video into sections with some text notes. I hope it will make the video clear for you and will answer for your questions. Let me know how you like it! Materials: - quartersawn beech - an old plane blade and cap iron - presto mag liquid oxydation - boiled linseed oil - shellac orange If you have any questions or sugestions just write a comment.
That's an interesting way of adjusting the mouth, the precursor to the frog we are all familiar with I guess. It's always fun to see the compass plane getting used. I would have loved to have seen a video of making the plane float(s) maybe next time you make one. As usual lovely work Mr Gakos.
Dear Mr. Gakos- I tried to check your Instagram with no luck! I was wondering if you make any of these for purchase, if so where can I find your merchandise to place some orders? 😁
Hahaha! I just got a wooden razee jack plane to use as a short jointer since it's quite a bit longer than my no. 5 and completely neglected to look at the wedge and saw that it was waaay too small for it, like it was made for a 1 3/4 inch smoother that the estate sale people kind of shoved in there and was tearing my hair out figuring out how to make a new one and remembered what you did to make this one. Your planemaking vids are lifesavers for this newbie hobbyist woodworker and planemaker/plane kludger. Thank you! Now to figure out how to fix the tote.
I hate that some youtubers get so many followers for being clickbait, or by acting insane, while you have Steve sitting over here being a absolute master of craft. Steve I envy your mind and ability to bring your inspirations to life.
Glad to see you brother. I hope all is well with you and your family. My wife lost her father to Covid so please take every precaution. Beautiful work yet again.
Mr. Stavos Gakos; Very nice plane! Have you ever attached an oily base like lignum vitae or maybe a boxing made of hard brass? Can you please make a video showing how you make your plane-maker’s floats and other tools? Thank you for your tutelage and honest portrayal of your work. I especially trust your presentations when you point out mistakes and wear bloody bandages. I’m like you; let it bleed, but we clean and bandage the cuts to prevent staining the project with blood. Staining in a small area with blood causes an uneven finish and color in the entire project. To solve this problem, a person either stains the entire project in blood or none at all. Take care, Bill from rural Minnesota USA.
Maybe it's heresy, but the irons looked gorgeous before the oxidation. Maybe consider it for another plane. And thank you for using a compass plane, it was the first time I've ever seen one used. Instantly on my wishlist!
Excellent travail et un magnifique rabot. J'admire la qualité de coupe de vos outils. Mais là qualité de coupe seule ne suffit pas, il faut aussi la dextérité de l'utilisateur. On en a une illustration à 15 :00 environ. Pour couper du bois dur en travers du fil de cette façon, il faut les 2 : qualité de coupe et dextérité, et vous avez les 2. Bravo et merci pour cette belle vidéo. A bientôt et prenez soin de vous et de vos proches. Encore merci
Amazingly nice work and skills. I didn't get the double wedge until the end. That blew my mind as a way to adjust the cut and make the plane more versatile. Bravo!
Just a small tip, ive read somewhere, that yo should not use the bluing liquid straight from the bottle. The chemicals you bring in with the brush (when brushed on the steel) can make the liquid go bad. Instead its better to pour a small amount into another container and use it all up in one go.
Very nice accurate chisel work .Don't see many people ,alright none so far,using a compass plane .BRAVO Stavros.That little palm plane is beautiful ,homemade by any chance?
@@StavrosGakos after watching your other videos I made a boxwood and ebony mitre plane last week and enjoyed the experience. Will have to make another one (or four) now! By the way, I was wondering how does your smoother manage with woods that have more interlocking grain/tearout problems than the piece shown in the video?
I love your videos and enjoy the masterful work you do. I wish you would show a little more real-time footage. I know the videos would be longer, but if you feel compelled to show sped-up filming because you feel the viewer would otherwise get bored, please don’t. You can’t please everyone, and those of us who love wood work will still be with you. Just a suggestion. Thanks for a great channel!
I love and admire your works and the flawless 'no talk' presentation. Thanks for sharing thee artisans craft of long ago. Fan for life. Now when will you show us the most essential tool, your classic work bench? >>> Concord, New Hampshire
Awesome always enjoy watching you making planes. Makes me want to try my hand. I look forward to when you are on thank you. Want to see new what's next.
Nagyon ūgyes vagy! És látszik hogy Asztalos!! Mondom ezt ugy , hogy én is Asztalos vagyok!😉😉Elöször nem tudtam, minek a hátsó késtámasz!?? Ötletes ,de még ijet nem is láttam.😲😲Ez valami 1850 körüli talállmány!!😉😉😉😉
I love watching your videos. Skills are top notch, both in metal working and wood. Only advise to you would be to soften the noise and wall color of your new shop. The acoustics were better before. The white walls and LED lights show up much harsher. I think you mentioned you get up at 4:00 am to do work on these videos. I am curious what your day job is???? Can you make your own radius plane?? I think you are ready for a new challenge. Appreciate your hard work and dedication to the crafts shown.
Thanks! The acoustic were better because i worked on 5 m2, now the workshop have 30 m2 and it's almost empty yet. I hope that future wooden cabinets will suppress the light. Now i don't work so early becouse our bedrooms are above the workshop. My day job is office worker, nothing special. I have stanley no 113 so i think i don't need another radius plane :) Cheers!
Excellent travail,pas besoin d'outils Japonais!J'aime beaucoup.Je remarque juste que le coeur du bois a été placé dessus,alors qu'il est plus dur et que d'habitude on le met dessous,car il glissera mieux.
Thanks for sharing your excellent craftmanship, I enjoy all of your videos. You are one of the few TH-camr channels that I never skip ads on, you deserve the revenue. Keep up the good work!
MAGNIFIQUE ! C'est un superbe travail ! Bravo Monsieur ! Mais, j'ai rêvé ou bien la perceuse colonne que l'Artiste utilise (à 8.22) est une perceuse MANUELLE. Le forêt est relativement lent et on voit une ombre comme s'il tournait une manivelle ? Quel beau travail ! 😃
through and through this video is amazing! Stavros, I was a big fan of you, but now I'm even bigger fan :)! Great job with both - the plane and the video!
@@StavrosGakos Także dziękuję 😀. To jest chyba drewno dębowe. Narzędzia muszą być wyjątkowo ostre. Kiedyś docinałem kliny dębowe, aby wzmocnić połączenia nóg krzeseł z siedziskiem. Trudna to praca. No, ale teraz muszę zamówić tranzystory do liniowego sterowania, nowej generacji silnikiem synchronicznym BSMH (BLHF-RM). Gratuluję Panu wiedzy, talentu i dokładności. Serdecznie pozdrawiam 😀. This is probably oak wood. Tools must be extremely sharp. I used to cut oak wedges to strengthen the joints between the legs of the chairs and the seat. It's a difficult job. Well, but now I have to order transistors for linear control of the new generation BSMH synchronous motor (BLHF-RM). Congratulations on your knowledge, talent and accuracy. Best regards 😀.
So I’ve waited over a month... I’m not disappointed, as always that is perfection. A masterpiece... The video, the workmanship, the plane. All of it. I just can’t get enough of it. Question: have you had formal training in plane making? We need to respect old school ways of tool making Please tell me you are not self taught? It doesn’t get any better than this. Brilliant vid @StavrosGakos Keep em coming...
Hey Scott! Thanks a lot :) Here in Poland we don't have any planemaking classes, but i have some plans to change it. I'm self taught and i'm still learning ;) All the best for you!
I would say if I was to walk into any tool/edge makers 200 years ago they’d be making planes the exact same way you do. It’s beautiful to watch, wish I lived in Poland, I’d pay for classes with you. What’s your opinion on modern plane irons eg lie Nielsen A2 cryogenically treated steel or veritas PMV-11 steel compared to old plane irons? I don’t see you use many modern planes, why would you when you have a shop full of your planes. Just wondered what you thought. You’ve never shown us you having a problem with getting an edge on old steel. Shavings are perfect every time.
@@scottanderson2581 sorry, i miss your comment. All old laminated plane irons are way more easier to sharpen than new irons because they have less hard steel to work with. That's why i like them so much :) Regards!
Beautiful job, Stavros! Always a pleasure to watch you work. Was that a Norris smoother you were showing off? Lol, if I had one I'd show it off too. Do hope you and your family are doing well. Thanks for taking the time to share your work.
"Oh cool! A coffin smoothing plane, I can use this video to help me with making one for a tapered iron set I have!" -double wedge Yooooo, that's awesome
In today's episode i'm gonna build a classic coffin smoother with unknown patent to adjusting the mouth. Seat back, relax and enjoy the video :)
BTW Check the timeline - i'm gonna cut the video into sections with some text notes. I hope it will make the video clear for you and will answer for your questions. Let me know how you like it!
Materials:
- quartersawn beech
- an old plane blade and cap iron
- presto mag liquid oxydation
- boiled linseed oil
- shellac orange
If you have any questions or sugestions just write a comment.
That's an interesting way of adjusting the mouth, the precursor to the frog we are all familiar with I guess. It's always fun to see the compass plane getting used. I would have loved to have seen a video of making the plane float(s) maybe next time you make one. As usual lovely work Mr Gakos.
Thank you Andrew! I'll remember about the floats!
Dear Mr. Gakos- I tried to check your Instagram with no luck! I was wondering if you make any of these for purchase, if so where can I find your merchandise to place some orders? 😁
I'll use supper glue on both sides of the wooden plane.
Merchandise, like t-shirts or what?
Hahaha!
I just got a wooden razee jack plane to use as a short jointer since it's quite a bit longer than my no. 5 and completely neglected to look at the wedge and saw that it was waaay too small for it, like it was made for a 1 3/4 inch smoother that the estate sale people kind of shoved in there and was tearing my hair out figuring out how to make a new one and remembered what you did to make this one.
Your planemaking vids are lifesavers for this newbie hobbyist woodworker and planemaker/plane kludger. Thank you!
Now to figure out how to fix the tote.
So the bottom wedge allows the blade to be shifted forward, thus making the mouth tighter. Clever... Nice to see this demonstrated. Thank you!
You're welcome :)
Sir, You inspire this American to be a better craftsman. I applaud you. Thanks for sharing.
You're welcome :) Regards!
tak, mistrz jest świetny, najważniejsze jest to, że wypełnia swój kanał i nadal zachwyca nas swoimi wysokiej jakości produktami
👍👍👍
I hate that some youtubers get so many followers for being clickbait, or by acting insane, while you have Steve sitting over here being a absolute master of craft. Steve I envy your mind and ability to bring your inspirations to life.
Thanks a lot Theodore but my name is not Steve ;) Regards!
Stavros
It’s a delight to watch a masterpiece being crafted.
Thanks a lot Scott!
Utterly wonderful. 14.58: the confidence in a sharp chisel, so satisfying. I now need to find a compass plane.
Thank you Stephen!
Well said Stephen.
I would love a compass plane as well.
Great video as usual. I guess you're making your floats by yourself. Floar making would be an interesting topic for another post.
Thanks, i'll make it some day
Glad to see you brother.
I hope all is well with you and your family.
My wife lost her father to Covid so please take every precaution.
Beautiful work yet again.
Thank you! My condolences..
An adjustable mouth on a coffin plane. Bravo!
Thanks!
Mr. Stavos Gakos; Very nice plane! Have you ever attached an oily base like lignum vitae or maybe a boxing made of hard brass? Can you please make a video showing how you make your plane-maker’s floats and other tools? Thank you for your tutelage and honest portrayal of your work. I especially trust your presentations when you point out mistakes and wear bloody bandages. I’m like you; let it bleed, but we clean and bandage the cuts to prevent staining the project with blood. Staining in a small area with blood causes an uneven finish and color in the entire project. To solve this problem, a person either stains the entire project in blood or none at all. Take care, Bill from rural Minnesota USA.
Thanks Bill! I'll do that video one day :)
wow, that is amazing, now I understand how the wood planes were made more than a hundred years ago.
Every wood worker needs to experience a wooden plain thair is something just so magical about them. Nice vid and beautiful work
I think the same! Thank you :)
You may have an unhealthy addiction to hand tools, but thank you for sharing your obsession with us.
Thanks Ross! I think that everybody have some obsession. In compare with some of them my obsession is nothing ;) Regards!
The mouth is so tight, the shavings don't have a chance to curl. Astonishing!
Thank a lot!
Stavros, I swear each tool you make is a work of art! Each is more beautiful than the last.
Thanks a lot Nik:)
Maybe it's heresy, but the irons looked gorgeous before the oxidation. Maybe consider it for another plane. And thank you for using a compass plane, it was the first time I've ever seen one used. Instantly on my wishlist!
Thanks a lot! Clean, sunblasted irons takes the rust, thats why i'm making oxydation. Regards :)
I’m never disappointed with your videos.👍
You are a joy watching you making this plane. High craftsmanship, and great video. Thank you for sharing it. Bravo Stavro!
Thanks a lot!
Excellent travail et un magnifique rabot. J'admire la qualité de coupe de vos outils. Mais là qualité de coupe seule ne suffit pas, il faut aussi la dextérité de l'utilisateur. On en a une illustration à 15 :00 environ. Pour couper du bois dur en travers du fil de cette façon, il faut les 2 : qualité de coupe et dextérité, et vous avez les 2. Bravo et merci pour cette belle vidéo.
A bientôt et prenez soin de vous et de vos proches. Encore merci
Merci :)
Лекарство без таблеток! Спасибо
Simply perfect. Have to build it. Thank you!
Thanks!
Amazingly nice work and skills. I didn't get the double wedge until the end. That blew my mind as a way to adjust the cut and make the plane more versatile. Bravo!
Thanks Robert!
Bosko jak zwykle! Regulacja szerokości ust mistrzostwo świata. ;)
Dzięki Michał!
Your work is incredible. 😎
Thanks a lot!
we need to get a small shop tour when you get it all set up!
One day for sure :)
Stephen, I admire your talent! May God give you wisdom to dispose of it correctly)
I'm not Stephen but thank you :)
Stavros!
So glad to see your work again.
Perfect,Stavros!
Ożesz stary - ale pracy włożyłeś!!! Skomplikowana bestia tym razem i mistrzowski wykon jak zawsze. Pozdro!
Dzięki Łukasz!
I looked for a reason to nag, but found the job flawless. Congratulations - a job well done.
Thank you
Another exquisite build. I look forward to the next one.
Thanks a lot!
Nicely done, that plane iron looks like a really nice heavy one with a nice construction. I had not seen that maker before.
Thanks a lot Troy! Yes, it is preety fat, almost 5mm thick 👍
Как всегда, прекрасная работа Мастера!
Dziękuję Oleg :)
Perfect work.
I’ve watched all your plane making videos. This is a stunning piece of work. Very inspiring.
Beautiful, a work of art and useful plane.
Bravo, thanks for the video.
Thank you!
Superbly presented Stavros. I've learnt a lot
Just a small tip, ive read somewhere, that yo should not use the bluing liquid straight from the bottle. The chemicals you bring in with the brush (when brushed on the steel) can make the liquid go bad. Instead its better to pour a small amount into another container and use it all up in one go.
Thanks a lot!
@@StavrosGakos Youre welcome, thank you for the awesome content
That's A great tip thanks!
Very nice accurate chisel work .Don't see many people ,alright none so far,using a compass plane .BRAVO Stavros.That little palm plane is beautiful ,homemade by any chance?
Thank you! I made that little plane in my 032 video :) Regards!
Was so excited to see this pop up!!! Yes!!!! You do such great work
Thank you!
I really enjoy watching your craftmanship in plane making and hoping that i can build my own hand plane inspired by you...
Thank you! You should try it :)
Bad stuff in 2020:
Pandemia
Positive stuffs in 2020:
Gakos its creating new rules of thermodynamic and math to make planes
Отличная идея - деревянный рубанок с двойным ножом!!! 👍
Beautiful job! I love old-style wooden planes. If they are set up right, they work as well as an expensive metal plane.
Great videl!
Thanks a lot!
That is a really beautiful piece of work - exceptional, even by your high standards.
Thank you!
@@StavrosGakos after watching your other videos I made a boxwood and ebony mitre plane last week and enjoyed the experience. Will have to make another one (or four) now! By the way, I was wondering how does your smoother manage with woods that have more interlocking grain/tearout problems than the piece shown in the video?
@@nickyork8901 That's great Salo:) My smoother works very good but not perfect, i have to improve my sharpening :) Regards!
I love your videos and enjoy the masterful work you do. I wish you would show a little more real-time footage. I know the videos would be longer, but if you feel compelled to show sped-up filming because you feel the viewer would otherwise get bored, please don’t. You can’t please everyone, and those of us who love wood work will still be with you. Just a suggestion. Thanks for a great channel!
zawsze warto czekać,pozdrawiam
Pozdrowienia :)
I love and admire your works and the flawless 'no talk' presentation. Thanks for sharing thee artisans craft of long ago. Fan for life. Now when will you show us the most essential tool, your classic work bench? >>> Concord, New Hampshire
Thanks Robert! My workbench ise in every video ;) Regards!
Very nice job, thank you.
Szacun piękna robota aż miło się to oglądało
Dziękuję 🙂
AT 14:57 Come on man sharpen your chisel!!!!! LOL just a joke. ;o) I love watching your videos. I always learn something new. Thanks!!!
Υπέροχος Σταύρος!
Thanks forsharing another awesome build, man!
PS. So enjoyable seeinh the 113 doing its job!
Thanks a lot!
Pacholęciem będąc z równą przyjemnością oglądałem „Zaczarowany ołówek” 🙂. Nie może być inaczej niż 👍🏼.
Dziękuję bardzo :)
Piękna robota warta każdych pieniędzy. Dzięki za film.
Pozdrawiam serdecznie
Dzięki Adam! Pozdrowienia
Very helpful! Thanks for sharing!
Awesome always enjoy watching you making planes. Makes me want to try my hand. I look forward to when you are on thank you. Want to see new what's next.
Thanks Donnie! You should try it :)
As always, a fascinating and thoroughly enjoyable short film. I love your work! 👍
Thanks mate!
Beautiful
Very good vedio thank you very much
Nice antique jacob busch plane iron dated aprox 31 may 1850
Always enjoy your process. Thank you for sharing.
Que perfección de trabajo y que maravilla de herramienta te ha quedado. Te felicito. Buen trabajo.
Gracias :)
Very inspiring!
Hazzzaaahh!
New Gakos Plane !
And just in time for my Sunday dinner :-)
Nagyon ūgyes vagy! És látszik hogy Asztalos!! Mondom ezt ugy , hogy én is Asztalos vagyok!😉😉Elöször nem tudtam, minek a hátsó késtámasz!?? Ötletes ,de még ijet nem is láttam.😲😲Ez valami 1850 körüli talállmány!!😉😉😉😉
I love watching your videos. Skills are top notch, both in metal working and wood. Only advise to you would be to soften the noise and wall color of your new shop. The acoustics were better before. The white walls and LED lights show up much harsher.
I think you mentioned you get up at 4:00 am to do work on these videos. I am curious what your day job is????
Can you make your own radius plane?? I think you are ready for a new challenge.
Appreciate your hard work and dedication to the crafts shown.
Thanks! The acoustic were better because i worked on 5 m2, now the workshop have 30 m2 and it's almost empty yet. I hope that future wooden cabinets will suppress the light. Now i don't work so early becouse our bedrooms are above the workshop. My day job is office worker, nothing special.
I have stanley no 113 so i think i don't need another radius plane :) Cheers!
Nice work, like the edge details that you apply
Thank you :)
Excellent travail,pas besoin d'outils Japonais!J'aime beaucoup.Je remarque juste que le coeur du bois a été placé dessus,alors qu'il est plus dur et que d'habitude on le met dessous,car il glissera mieux.
Thanks a lot!
Всё круто, как всегда. 👍🥇
Dziękuję!
La verdad esto que hace usted es una auténtica obra de arte
Thank you :)
Beautiful job. Thank You!
Jim
Thanks a lot!
Very nice
Thanks a lot!
Bardzo sprytne rozwiązanie 👍😀👌
Some of your best work yet. Nice video.
Thanks a lot Nicholas!
At 15:00 we see the Chiselius Ultrasharpius in it's natural habitat.
hahahah :D
@@StavrosGakos moje by chleba tak nie pociely... 😅😂🤣
Stunning craftsmanship! Really inspiring 😍
Thanks you!
Thanks for sharing your excellent craftmanship, I enjoy all of your videos. You are one of the few TH-camr channels that I never skip ads on, you deserve the revenue. Keep up the good work!
I appereciate it 👍👍👍 thanks a lot!
Very cool work, I am following you from Iraq
MAGNIFIQUE ! C'est un superbe travail ! Bravo Monsieur ! Mais, j'ai rêvé ou bien la perceuse colonne que l'Artiste utilise (à 8.22) est une perceuse MANUELLE. Le forêt est relativement lent et on voit une ombre comme s'il tournait une manivelle ? Quel beau travail ! 😃
Thank you! Here is video about that hand cranked drill press
th-cam.com/video/r1bO_MfWs8Y/w-d-xo.html
You deserve more subs. Great craftsman.
Thanks Tom!
Warto czasami poczekać:) tak trzymaj, pozdro
Dzięki Robert :) Pozdrówki!
Those are some sharp chisels!
Watching his chisels go through wood keeps me inspired to keep working on my sharpening game.
great master! I have been watching many of your videos and every time is like wonder )))
Bravo sou!
Thank you Richard!
through and through this video is amazing! Stavros, I was a big fan of you, but now I'm even bigger fan :)! Great job with both - the plane and the video!
Thank you Nikolai! I apperaciate it:)
Absolutely beautiful!
Thanks Wayne!
Theo king plaine, Very good, fantastic, parabéns Brasil 👍
Thank you :)
Amazing. It works wonderful as well as being beautiful. Some day I am going to make a plane.
Thanks Jim! You should do this ;) Regards!
Good idea, congratulations 👌.
Dziękuję :)
@@StavrosGakos Także dziękuję 😀.
To jest chyba drewno dębowe. Narzędzia muszą być wyjątkowo ostre. Kiedyś docinałem kliny dębowe, aby wzmocnić połączenia nóg krzeseł z siedziskiem. Trudna to praca.
No, ale teraz muszę zamówić tranzystory do liniowego sterowania, nowej generacji silnikiem synchronicznym BSMH (BLHF-RM).
Gratuluję Panu wiedzy, talentu i dokładności. Serdecznie pozdrawiam 😀.
This is probably oak wood. Tools must be extremely sharp. I used to cut oak wedges to strengthen the joints between the legs of the chairs and the seat. It's a difficult job.
Well, but now I have to order transistors for linear control of the new generation BSMH synchronous motor (BLHF-RM).
Congratulations on your knowledge, talent and accuracy. Best regards 😀.
So I’ve waited over a month...
I’m not disappointed, as always that is perfection.
A masterpiece...
The video, the workmanship, the plane.
All of it.
I just can’t get enough of it.
Question: have you had formal training in plane making?
We need to respect old school ways of tool making
Please tell me you are not self taught?
It doesn’t get any better than this.
Brilliant vid @StavrosGakos
Keep em coming...
Hey Scott! Thanks a lot :)
Here in Poland we don't have any planemaking classes, but i have some plans to change it. I'm self taught and i'm still learning ;)
All the best for you!
I would say if I was to walk into any tool/edge makers 200 years ago they’d be making planes the exact same way you do.
It’s beautiful to watch, wish I lived in Poland, I’d pay for classes with you.
What’s your opinion on modern plane irons eg lie Nielsen A2 cryogenically treated steel or veritas PMV-11 steel compared to old plane irons?
I don’t see you use many modern planes, why would you when you have a shop full of your planes.
Just wondered what you thought. You’ve never shown us you having a problem with getting an edge on old steel.
Shavings are perfect every time.
@@scottanderson2581 sorry, i miss your comment. All old laminated plane irons are way more easier to sharpen than new irons because they have less hard steel to work with. That's why i like them so much :) Regards!
well done. i love the final result. very creative.
Thanks a lot!
Superbo!! gratulacje 🙂🤚🏽🤚🏽 bardzo ładnie!
Dziękuję!
Beautiful job, Stavros! Always a pleasure to watch you work. Was that a Norris smoother you were showing off? Lol, if I had one I'd show it off too. Do hope you and your family are doing well. Thanks for taking the time to share your work.
Thanks Michael! It is Norris no5 or noA5. I don't know wich one because the tote is not original.. All the best for you!
jak zawsze perfekcyjnie, już brakuje synonimów aby nie powtarzać się w komentarzach :)
Dzięki Mariusz!
Piękny naprawdę, to już wiem dlaczego jakiś Cześ temu miałem okazję kupić za Alle... Twojego coffina 😁
Dzięki!
Piękny, masz fach w ręku. A tu człowiek nieraz się męczy, żeby nóż (do struga) prosto wyprowadzić ;)
Dzięki Marcin!
@@StavrosGakos A proszę;) Chętnie bym przygarnął jeden ze zrobionych przez Ciebie strugów - jest jakaś możliwość?
@@marcingonsievski9395 niestety nie ma takiej możliwości, nie mam czasu na robienie swoich rzeczy a co dopiero rzeczy na sprzedaż :) pozdrowienia!
@@StavrosGakos Rozumiem, OK. Powodzonka w dalszych pracach i czekam na kolejne filmy. Zdrówka
I take my hat off to you, Stavros! Πολύ ωραία!
Dziękuję :)
"Oh cool! A coffin smoothing plane, I can use this video to help me with making one for a tapered iron set I have!"
-double wedge
Yooooo, that's awesome