Nuclear Submarine Light Restoration. Cold War Restoration
ฝัง
- เผยแพร่เมื่อ 14 ก.พ. 2020
- I bought what I (and the seller) thought was a rusty ship light for 30 euros to restore it. After doing some research on ebay etc., I found the lights were probably from a nuclear submarine and worth well over 200 euros. Pretty great find. And it was a lot of fun to restore it even though all the rusted bolts and screws gave me some gray hair.
The disassembly on this project took a lot of time. Probably half of the screws were so badly stuck I was almost not able to open them and some of them broke. Even after soaking the parts in rust remover some of those would rather brake than open. I drilled those holes open and made new threads for those. I also had to make most of the broken screws by myself but I left that out from the video. Basically I used a normal screw as a base and rounded the heads and cut them to desired length. Rounded tops are not common these days so I couldn’t find any of those from shops near me.
After I had used rust remover I used paint stripper to remove the old paint. The parts were painted with light gray, like it originally was. This paint doesn’t need a base coat underneath. I didn’t fill/file all the casting marks to keep the original look and because I fell this type of item doesn’t need to be all completely even and shiny. That would also have required me to remove a lot of material as there were some deep pits from the casting process. I also nickel plated all the steel parts that were left outside the shell to protect those from rusting again.
I had to do a slight modification for the electronics. The lamp originally had some wire running to other lamps but since I only had one lamp I decided it’s better to remove those rather than leave cut wires with live electricity inside the lamp. I thought it would be fun to add an alarm noise and time relay to the switch so it would have this alarm effect like there was an emergency or a missile launch.
Tip: a free way to support my channel is access amazon/ebay to do your regular shopping through these links. I will get a small fee from each product bought on amazon after clicking these links, whether it was the linked product or a different one.
---------------------------------------------------------------------
Patreon: / oddtinkering
T-Shirts: teespring.com/stores/odd-tink...
Instagram: / odd.tinkering
Tools used in this video :
SCREW DRIVER SET: amzn.to/2F3n6kO
RUST REMOVER: www.mc-51thebestrustremover.c...
ROTARY TOOL: amzn.to/2WF75I6
POLISHING KIT: amzn.to/31w983l
NICKEL ANODE: amzn.to/2J62kTy
NICKEL PLATING SOLUTION: amzn.to/2oW0qOk
Other tools:
CHUCK NORRIS’ TOOTHBRUSH: amzn.to/2YfXUj2
CORDLESS DRILL: amzn.to/2Wois77
MY FILMING GEAR:
MAIN CAMERA: amzn.to/2JvtKox
MAIN TRIPOD: amzn.to/2OlpYgn
MICROPHONE: amzn.to/2I80iDz
VIDEO LIGHTS: amzn.to/2FpJDaB
MAIN LENS: amzn.to/2Fm8yMk
CINEMATIC LENS: amzn.to/2TmNdHH
WIDE ANGLE LENS: amzn.to/2U7iJha
GOPRO: amzn.to/2U3eqU3
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ th-cam.com/channels/f_s.html...
---------------------------------------------------------------------
Restoration playlist▶ th-cam.com/users/playlist?list...
---------------------------------------------------------------------
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 58 [ซับไทย]](http://i.ytimg.com/vi/TgNEbYSTY0Y/mqdefault.jpg)
Bucket: "Liquid ice"
Odd Tinkering: I have achieved
*comedy*
That stuff worked wonders for cleaning those parts. Do you happen to know where he got it from? There isn't a link to it in the description.
@@kyle8971 it's water
@@eternal-gamerdude2119 whooooosh
@@eternal-gamerdude2119 ooooooooooooof
All Gamez - Roblox & Minecraft you missed the joke harder than my parents missed my birth
2am, about to goto sleep
TH-cam: "look at this dude restoring some cold war shit"
Me: *sigh* one more
I fell for it aswell, 5:00am for me.
TheSpoi 2am for me
Its 8:46 am
Imagine how bored he is being up working on a old light!!
Checks out. Just finished the video, it's 2:34 am right now.
Instructions unclear: accidentally restored whole submarine
The Legendary Z accidentally built thermo nuclear warhead
accidentally ressurected hitler.
Lmao
Accidentally made submarines and tanks and warheads
so many stuck screws tho
Odd tinkering: "it took me ages to remove all the parts"
Me: *well it took me AGES to know that liquid ice is just water*
Rain ong i felt stupid cus i thought it was a funny name for acid then i thought about it liquid ice is water
Yes, I usually use condensed water vapour, so I was like... whaaat?
Yeah, frozen water is easier to understand.
Yeah I googled liquid ice and everything. Me and my dumb ass don't belong on the internet
Rain also rust remover is just soy sauce give it a taste
(I’m joking)
(Or am I)
Hello I am from Russia. On your lantern there is a state quality mark and the inscription "Made in the USSR". On military products such signs and inscriptions have never been applied. This is a lantern from a civilian ship.
And being russian gives you qualification to affirm it. Lol
@@ham3263 Yes, we all live like that. (￢‿￢ )
@@ham3263 ЕСТЕСТВЕННО!
@@ham3263 that's like common knowledge in Russia. I can add that this isn't nuclear lantern as the model 567 mostly used for signals when normal ships can't move out of the way of other ship, like in case of diving operations. And you can order it even now for like 6000₽ wich is about 80 dollars.
@@Reinkjaky Yup common marine light fitting.
youtube recommended at 2:30 AM "here is a man fixing technology you have never seen before"
Fruco Gaming me to welcome to TH-cam recommending me the same thing
yup same
ya pretty much
yupp
Lol
It's exactly 2:30 am as I read this
"Liquid Ice" - looks more like condensed steam to me
Stevening uncarbonated soda water
Umm it’s clearly lemon-water without lemons.
Non-lemon lemon-water :D
Looks like transparent blood
I think all you guys are right, liquid ice, what a crack pot 😜
The wrench that comes out after the pliers to remove the second bolt on the dome is called 'I'M NOT ASKING ANY MORE'.
A nuclear submarine? I bet you had a blast restoring this.
Insert you're everywhere comment here
Thank you Russian man,very cool!
ha-ha.
According to a Russian commentor above, this is actually from a surface ship, and not a nuclear submarine.
I would love to get some Soviet era stuff but so many things are faked. I wouldn’t be able to tell the difference.
Sets off alarm and has just alerted the whole Russian Atlantic Fleet.
so all of 1 1/2 seaworthy ships?
Russian : one of are ships are still operating
sets alarm off and the US embassy is wondering why a old Soviet sub is on US soil
@@heaftytoad3942 Honestly I'd be surprised too if I found a Soviet sub materialising onto land and not to water.
@@l0rrow288 same
This is the lantern "I can not give way." Red is left, green is right. Designation on ships. This particular one was made in the USSR in 1975.
Я смотрю на увеличенной скорости вдвое. Вероятно пропустил.
@Eye Above All "I'm watching it on double speed. Probably I minded it".
This is the channel I come to now when I get stoned, it is so relaxing and my brain stays focus the entire time. I love that there is no talking, no music and some comedy lol
That made me chuckle 👍
I binge-watched most of your videos yesterday. I like how you choose to edit your videos: no constant talking and no background music, just the important sounds of craftsmanship at work. So much is lost when you cannot hear the tapping, scraping, drilling, and buzzing of tools.
Add to that the quality of your work and how you show close up every piece as it is being taken apart, what I see here reminds me of a TV show that I watched many years ago (I forget the name.) You do outstanding work.
Odd tinkering: ”It took me ages to get everything apart.”
2 seconds later: casually pulls giant wrench out of his pocket.
Is that a wrench in your pocket, or are you just happy to see me?
Vermouth On The Rocks lol
That's the "I'm not asking" wrench.
Lol
If he held the pump pliers the right way, he would have gripping power. The only people I see holding them that way are apprentices.
The oddly shaped lens is called a Frensel Lens, and was the predecessor to modern diffused lenses. They were used exclusively in lighthouses from the 19th and mid 20th century. Great find and restoration!
The conclusion was alarming.
...
I'll see myself out.
**cane appears to pull you off stage**
If you have trouble with seized parts you can boil the assembly in oil. The oil gets very thin and can penetrate tight spaces. That works especially well if you have a steel piece stuck in an alloy piece as the heat expands both parts - but the alloy part will expand more due to the physical properties of the metal. Hope this helps in future restorations!
Edit: I think that white gunk on the large threaded pieces was old sealant or nylon ribbon used to keep an air tight (or water vapour tight if your in a submarine) seal.
Ive never been this early since the playstation restoration.
Hey @Odd Tinkering . Big thanks for the heart.
my man is wearing a smartwatch whilst dipping his hands into a bucket of rust remover
.....yup !!
MY MAN!
The rust remover is safe, worst case you get a rash from disolved materials in it.
@@jonanderson5137 in eastern europe most of the rust remover are very strong acide
The smart watch isn’t even touching the rust remover
Hey, this channel called "Best Relaxing ASMR" is stealing a fair amount of your videos, and others most likely also stolen from other TH-camrs. You should try to deal with this. Best luck.
Feels like "best telaxing asmr" boted his sub. He already got more than 5k sub in 9 videos
Report them for impoersonation!
Best relaxing asmr actually linked his video and said it was his content they just put in relaxing music
@@sussy8382 but that does not means best relaxing asmr can take his video.he/she is just trying to avoid copyright
@Wandy Wexler Weslon asmr is overrated af
Love that you don't talk just restore, beautifully.
You know how many videos it took me to realize that “liquid ice” wasn’t some strange brand chemical. 🤦🏻♀️
F
HaHa
Fuuuuck
I was like, "seriously?"
What is it?
Bucket: *liquid ice*
Me: *loading*
*couple of seconds later*
Me: "Oh I get it."
Odd Tinkering -
Just a old cold war light resto.....
Me - THERAPY
If someone curious about text on sign. "Не могу уступить дорогу" - Can not go out of the way. "Сделано в СССР" - Made in USSR.
"made in USSR"
@@Dilemma7903 oops, have a typo. Thanks
I'd think that the "CCCP," would've given as clue, as to the latter.
реально круто
"Не могу уступить дорогу" More accurately translates to "Must not be hidden." or "Must not be removed" literal translation "I Cannot give way"
Hi, I’m Russian and I’m watching your videos from Russia. Well done, you restore things very well. By the way, the tag says "I can not give way" the rest I think you will read without translation. Good luck in the restoration. and we have good and interesting videos.
Артём,для них это все от подводной мать её лодки....)))))
@@RomanMashkin Ну потому я и спорить не стал... еще и от атомной...))))))) Спасибо земеля что поддержал!
@@user-qw4nd5po6x Artyom ! Melnik is waiting for you at Polis.
Просто привлечение подписчиков , обычный коммерческий ход !
Ну вообще это левый ходовой огонь, если я правильно понял.
Really nice to hear how hard he's trying to unscrew the screws by listening to the vibrations via headphones/earbuds.
Spanish saying:
"Más apretao que las tuercas de un submarino."
(Tighter than the bolts of a submarine)
Impossible to be more accurate.
No se porque me he cagado de risa con esto
thats what she said
aight imma head out
Это левый бортовой сигнал надводного судна, никак не подводной лодки. Применяется для обозначения судов занимающихся подводными гидрографическими или другими работами. Требуй возврата части денег.
PS: не всякое оборудование с русским текстом прямиком с атомной подводной лодки)))
Да, странная надпись для подлодки "не могу уступить дорогу" 🤣
@John Doe
"This is a starboard signal of a ship, not a submarine's. Used in hydrographic survey vessels and the like. You should ask for a partial refund. PS: not everything inscriped in russian comes directly from a nuclear sub)))"
@@sydbarrett9733 Да, тоже смотрю, что необычно для совковских гостовских табличек)))
@John Doe try google translate, it works surprisingly well on russian
China Agressor в один день Одд будет чинить старый ядерный реактор. И в конце он заработает.
i was wondering, "what the hell is liquid ice?" then it hit me. lol
"Liquid ice?! Isn't that just water?!" Pretty much my thoughts after a few moments, lol.
Yup, I have to admit I needed some time to understand this joke lmao
It's like those (read here water) bottles you can get that have printed with a chemical label that reads "Dihydrogen monoxide".
I thought it was liquid nitrogen lmao
@@damian9303 same and I was like.... Liquid Nitrogen?!?!?!
20:52 That’s scared the living liquid ice out of me. I was just lying down on my bed in peace looking at the video and I turn my head for one second I almost fainted from fright.
Viewers: "Water"
Odd Tinkering: "No no no no noo, *l i q u i d i c e* "
Frozen gas which I heated up
I was today years old before I realized what that meant. I thought it was some exotic cleaner.
13:15
Heck yes, liquid ice is back
What temperature you think the liquid ice is at?
Yes
@@rynodragon2316 Idk. Room temperature?
inscription on the nameplate (russian): "I can not give way" (19:46)
Ye, and this means its not a submarine light ;)
@@psialt9720
Unless I'm mistaken, submarines still need signal lights in case their radio dies, redundant systems and all that.
Also, the Soviets. It wouldn't surprise me if they fielded boat signal lights as torches, considering how little of a shit they gave about their troops.
@@yocapo32 you shouldn't believe everything you see in American movies...
@@Escritorez don't you mean anything in American movies.
@OriginalYithian But this light does not look like something that would survive 300+ psi
me: wtf is liquid ice
me, 2 seconds later: i’m an idiot, an absolute blundering fool
Thank you for the restoration. I've seen another video where they got rid of the original writing plates etc and just ruined the old stuff, but you did an excellent job preserving the history!
2077: Odd Tinkering restoring the Pyramids
I'd watch that
Restoring my cyberpunk arm
2184: Odd TInkering's grand grandson: "Restoring antique android soldier from WW4."
Wut?
Nah,2077 oddtinkering launches the nukes
literally everyone: water Science teachers: liquid ice
The hell this have to do with the video??
@@milesnoble8646 Did you not watch the video? In the video, there's a part where there's just a bucket with the words "Liquid Ice".
Me in science class be like: oh god this solid water is too cold
@@milesnoble8646 13:15 There you have
People with certain accents: wader
Restoration-ASMR. Exactly what I need now after a long and stressful day. Thank you 😊
March 2020: restoring a lamp from nuclear submarine
April 2021: restoring a whole nuclear reactor of submarine.
2022 restoring the nuclear submarine
@@serenitygrant8127 2023 testing the nuclear submarine
2050 restoring earth
no god
2024 restore the soviet union
7:22 ah, yes, the forbidden soda
j o e l m s h a n e 4 it really cleans out your system and any clogs your pipes may have in your home.
No one:
WD40: Ppessssttsstsstststsssstsheehhsshhhhshshh
ahhaha
youre not funny, youre stupid
LMAO
Hahaha
@@beckykey7811 shut up Becky 😐
The label reads: "I Can't give way" )))
The safety switch was a nice touch! That red glass is beautiful! Good job!!!
As someone who used to build electric motors my instincts are screaming to Vaseline the gaskets so they last longer but anyway, this video is just so enjoyable to watch. Thanks!
Vaseline is petroleum-based and therefore, with time, likely to degrade these original, older, rubber seals (unlikely to be nitrile or neoprene)..... A sealant designed specifically for rubber would be recommended, such as us used for rebuilding brake calipers.....
The gasket and the washer are placed in a wrong order too (a very common mistake, so it could come like this from where he bought it). The washer comes between the gasket and the screw, so that the screw won't twist too much it when tightened.
Mine too!
i'm ashamed to admit that it took me a good twenty seconds to realize what liquid ice meant
Lool
The energy drink?🤣
I’m still confused tbh
@@thestarwarsnerd8742 just water
@@zancrow9974 H2O
"Не могу уступить дорогу" - для обозначения судов, занятых подводными гидрографическими или другими работами.
а автор уже понавешал свистоперделок, и такой "ОГООО, ДА ЭТО ЖЕ ФОНАРЬ ХОЛОДНОЙ ВОЙНЫ ЯДЕРНАЯ МОРСКАЯ ТРЕВОГА ВИУУУ" и заиграла музыка из red alert, блять
WTF
На работе лежит ящик таких фонарей в идеальном состоянии, со всей документацией
Oh, I did not know that!
*(I have no idea what he said)*
@@4hunnid50 nice
15:58 wrong assembly order
:
First a rubber seal, then a metal washer.
From the title I was thinking it was some “light” restoration on a nuclear submarine. 😂
LOVED this video!! I love old military stuff and to see you bring back this ship's light back to is old glory was so much fun to watch!! Keep up the good work!!!!
The bucket’s label is wrong. It should say “Molten Ice.”
That nameplate says "I can't give you the road" or smth like that, so it is supposed to be placed outside the submarine and to be turned on or off without any sound effects.
I was just about to go to bed and I see 'Posted 6 min. ago."
Whelp I have no choice BUT to watch now.
That's something different. But I have one question.. rest of the sub in part 2?
Ducktor wasn't born yet at the making of this video, I see.
Odd's phone rings...
"Comrade, we have a chat"
Odd hangs up and starts restoring get away car!!!
надпись на этикетке: "не могу уступить дорогу" )
Ты ангоязычным обьясни))
"I can't give way" надпись на фонаре
Лампочка 100% рабочая
На ржавой ещё увидал две у подряд (могу уступить) и не смог понять, что же там такое, ведь на зеленом было тупо круговой зеленый
I enjoy watching these videos, it's like ASMR, except it's actually good content. I don't regret subscribing at all!
beautiful restoration, glad to see old industrial and military stuff brought back to life, even if it is a light it's good to see it as it was in the day :)
I just discovered ur channel and I'm obsessed, this is my new asmr, but i can't sleep because the content is so interesting, help
This is definitely me during the Cold War
It was you, Dio!
But not from a submarine
Of course, Dio-sama, or should I say, Diotama.
I would love to see some sort of timer so we can know just how long the whole procedure took.
at least 5 minutes
The HARDEST-WORKING TH-camr out here! What an amazing before and after!
That shot where he removes a tool from his back pocket like he was already prepared for this shit. Quality content.
Ох, СССР! Круто!
переведите на английский пожалуйста
Кем работаете
Ага
Взгляд снизу вверх!
Thought I’d give some advice, I’m taking agricultural classes and learned that when you make new threads, it’s best to keep your hands open instead of making a fist. The reason why is because your left/right hand may be stronger than the other, and it could mess up the thread.
Also keep the Damn thing level like fuck that bugged me
OMG I just discovered your Chanel yesterday and I have already watched every single video on your channel it’s so satisfying seeing the before and after shots. Please please please consider doing a Nintendo wii console.😍😍😍
I absolutely adore your videos. They are so satisfying and perfect to watch. Keep up the great work! One of the best channels on TH-cam
Sempre ótimos vídeos ... ótimas restaurações ....Like sempre !!!😁👍
Everyone else: "Liquid ice is just water"
Me: *Chewing on a piece of solid water*
"Your point?"
Yes, but i think he need use " warm liquid ice" for a best result
That rust remover has seen better days
Love the no talk let's get to work mentality with this guy
Love these vids. One day I'd love to attempt my own restoration project on some random piece of junk I'm just lacking the knowledge, tools, space, patience etc... ;)
In mother Russia: lead paints you!
Thumbs up from whomever read that in their head with Yakov Smirnov' s voice.
I just went from watching this guy repairing a gameboy to a nuclear submarine light.
the macro/closeup shots work really well. I appreciate all the work that goes into filming these.
I'm surprised he didn't swap the incandescent bulb for a modern LED bulb just so he never has to take the thing apart again.
Okay, it's 2:30 AM, time for bed. I see notification saying "Odd Tinkering" posted a new video. Oh well, sleep can wait I guess.
Oh my mii
Over the Top! Everone needs one of these! ...Newk from Kentucky
Best TH-cam channel. Every night till I fall asleep
Odd Tinkering: "I restored an old soviet nuclear warhead"
They didn’t have those...
@@deadpool3005 ?
@@deadpool3005 ?
Deadpool means that Russia didn’t have nuclear warheads
Corinn Seeliger tsar-bomb?
I noticed one item that you reversed when reassembling. The two large ports on the top... when you removed the metal fitting, you then removed a metal washer and then the large rubber washer. When reassembling, you replaced the metal washer first, then the rubber washer. I don’t think it matters unless you plan to install it back on a submarine. 😉
Very cool restoration thought.
1975 год выпуска !!! Он старше меня !!!
1975 year of release !!! He 's older than me !!!
👍Ты лучший реставратор !!! 👍 You are the best restorer !!! 👍
I’ve seen these all across antique stores marked as “Glass insulators”. However despite my many years of insulator collecting, I have never seen one on power lines.
And now I finally know what they are.
"From an old Soviet nuclear submarine. Hopefully its not TOO radioactive"
*K-19 flashbacks intensify*
6:44 so does this man just keep a giant wrench in his pocket all day
No, he's just happy to see you.
@@webtoedman 😆👍
I noticed whilst you were removing the rubber seals during the dismantling stage that they appeared to have had some sort of sealing solution applied to them when new. I was a little surprised to see that you didn`t bother to use some sealant during reassembly. I know that it`s unlikely to go back to sea on any vessel but even if you used it as an outside light at home, the extra weather protection would keep the water out of the lantern. Good job all the same.
Today: Restores a submarine light.
Tomorrow: Restores an entire submarine.
Nuclear Launch Detected.
(DYING MARINE SOUNDS)
This is not from a submarine.
@@budmeister it literally says Nuclear submarine light
@@Rogue-hh7mh Read what the Russian commenter says above. This is not from a submarine but a surface ship. He got swindled. The only thing that states that this is a submarine light is the guy uploading the video.
@@Rogue-hh7mh Plus cramped submarines would never use a light this fucking big. Please use your brain before commenting, it'll make you look smarter, even though you aren't.
I stared at "Liquid Ice" trying to figure out what the hell that is for way too long hahaha
Thanks man, I was eating lunch and now I'm grey.
Idk if this is because I'm dumb or I watch your videos when I'm about to go to bed but it always takes me forever to get the liquid ice joke lol. All jokes aside, I love your videos and you've inspired started restoring things
"Cold War Restoration" sounds very not good out of context
Blah blah blah
Random thing that happened to me last night: I was watching tv at 12;55 am on a Tuesday night like any normal person would. ( I’m obviously being sarcastic.) and I was watching spongebob and all of a sudden my tv freezes. Me: why. Then... the blue screen comes on.
As of me immediately figuring out its the emergency alert system, I almost pissed my pants but I was too petrified to move(I didn’t)
Me: R.I.P my tiredness
I have watched far to many restoration vids thes last few weeks and paint stripper became my spirit animal
Imagine taking apart something built today but 70 years from now! Guaranteed it wouldn't go so smoothly with all the cheap materials we use now. Especially the screws would be a nightmare!
10:54
Me: JESUS CHRIST
Also me: oh, it’s a blow torch
Odd tinkering: it took me ages to get everything apart “pulls a wrench out his ass”
6:37
great j ob on the restoration! ..however, on reassembling the Wire Gland, you put the washer in first, then the Rubber Compression Gasket. The washer is supposed to be between the rubber compression gasket and the threaded bushing. The washer is used like that to stop the threaded bushing from tearing up the Rubber Gasket when tightening it.
...love the content btw! I've been taking in a lot of your videos recently!
Good restoration of an old submarine light & would make a perfect chill light to hang in a room! 🙂🙂