Restoring Worlds Smallest Lighter - Vintage Lighter Restoration & Repair
ฝัง
- เผยแพร่เมื่อ 17 ม.ค. 2020
- This mini lighter in missing some parts and it is in general very dirty and in need of full restoration. The lighter is very small only an inch or 2.5 cm tall. It’s the smallest lighter I’ve ever seen. It used to be nickel plated but the plating has worn off. The plating has to be restored. I also need to make a new screw for the flint because it would be very hard to find one.
I took off all the easy to remove parts and washed the lighter. Then it was put to rust remover. Rust removers basically work similarly to vinegar or other acids so they also work on brass. If you leave parts in there for too long they might dissolve so I usually do something else with brass. This time I thought the cap mechanism might unjam after treating it with rust remover. But it broke. Probably the spring was already so damaged the little acid broke it. Remember that I almost always put my lighter spring in rust remover and this is the first time something has broken. After the rust remover I washed the parts with water again to remove the rust remover. Notice what I did there? Remove the rust remover.
Brass can usually just be polished without sanding, unless there are some major pits in it. Brass is so soft the buffing wheel will wear it down pretty fast. This was the case with the lighter as well. So I polished the parts without sanding. I use a wool wheel with metal polishing compounds.
Then it was tome to make a new screw. I wanted it to have sort of knurling for better grip but I don’t have the tools to do “real” knurling. So I came up with a plan. I used a socket to create the knurling. I hammered a piece of brass rod in a socket which had number of “teeth”. The brass is so soft the teeth easily made nice evenly spaced lines to the rod. Then I drilled a hole to the rod. I made a thread on a smaller brass rod. The smaller rod was soldered in the drilled hole. Again my apologies for blocking the screen. I would usually re-film that but I didn’t want to remake the whole screw for couple seconds of footage. After soldering the screw was polished like the other parts.
The polished parts were electroplated with nickel in plating bath. If you want to learn more about this technique. Go check out my tutorial about it on my other channel, Odd Experiments.
Tip: a free way to support my channel is access amazon/ebay to do your regular shopping through these links. I will get a small fee from each product bought on amazon after clicking these links, whether it was the linked product or a different one.
---------------------------------------------------------------------
Patreon: / oddtinkering
T-Shirts: teespring.com/stores/odd-tink...
Instagram: / odd.tinkering
Tools used in this video :
MINI TORCH: rover.ebay.com/rover/1/711-532...
SCREW DRIVER SET: amzn.to/2F3n6kO
RUST REMOVER: www.mc-51thebestrustremover.c...
ROTARY TOOL: amzn.to/2WF75I6
PRESS FOR ROTARY TOOL: amzn.to/2Uiv1Eu
2-AXIS TABLE FOR THE PRESS amzn.to/2WPkttl
POLISHING KIT: amzn.to/31w983l
NICKEL ANODE: amzn.to/2J62kTy
NICKEL PLATING SOLUTION: amzn.to/2oW0qOk
Other tools:
CHUCK NORRIS’ TOOTHBRUSH: amzn.to/2YfXUj2
CORDLESS DRILL: amzn.to/2Wois77
MY FILMING GEAR:
MAIN CAMERA: amzn.to/2JvtKox
MAIN TRIPOD: amzn.to/2OlpYgn
MICROPHONE: amzn.to/2I80iDz
VIDEO LIGHTS: amzn.to/2FpJDaB
MAIN LENS: amzn.to/2Fm8yMk
CINEMATIC LENS: amzn.to/2TmNdHH
WIDE ANGLE LENS: amzn.to/2U7iJha
GOPRO: amzn.to/2U3eqU3
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ th-cam.com/channels/f_s.html...
---------------------------------------------------------------------
Restoration playlist▶ th-cam.com/users/playlist?list...
---------------------------------------------------------------------
Liquid ice tastes pretty refreshing ngl. Even better, pair that with solid water, and you've got the most refreshing 3 am drink on the planet.
Liquid ice is good, but have you ever tried fermented hops and barley? Pretty darn good, too. :-D
Eekiki umm 😂
I think you mean Solid Mist
CONDENSED WATER VAPOR
How about hot chocolate or whiskey?
Keeps me thinking
"Is liquid ice some sort of a chemical"
"Figured out that its a water LOL"
sad to say i just clicked in to
You must be slow
@@ATLTraveler that and I just killed a bottle of wine lol!!!
@@John-kr7iz hey no shame in that
@@ATLTraveler been one of those Saturdays
There's a channel called "Best relaxing ASMR" that kept on stealing your videos , I recommend doing something about it , the TH-cam community needs restoration
Closest thing users can do is report the channel as impersonation of another YT channel. I wish there was a more specific option regarding making money from ads by reuploading 1:1 videos from other YT channels.
Mass flag that channel
@@kekeater search up best relaxing asmr
@Big Name I saw a comment before about that channel, it's definitely not his
well said
This dude MADE his own screw. Respect for that one
I'm too tired. You really had me thinking that liquid ice was some special cleaning chemical 🤦🏻♀️. I was like "I've never heard of that". Lol I need sleep.
Shine is up real nice with some carnauba gas
Fun Fact: Liquid Ice is the main ingredient in the cleaning chemical knows as Dihydrogen Monoxide
@@anthonyjohn6520 they add it to the food to!
Same thing
@@anthonyjohn6520 Pro tip-
Adding a solution of Sodium Hydroxide and Triglycerides to your Dihydrogen Monoxide will make it much more effective!
YES! Tiny lighter is tiny! I think this is my favorite of the lighters.
Not much smaller than a common disposable lighter.
@@jjryan1352 And yet it's refillable, which makes it better
ᵗⁱⁿʸ*
I can imagine being outside a bar, when someone asks you. "You got a light?".....Yeah sure *whips this bad boy out*
😂😂😂😂
This person has done wonders restoring and fixing all these things. If only, he could restore the world.
Day 6433: I'm still on the hunt for this illusive "Liquid Ice" that I've heard so much about. My food supplies ran out months ago, so I've been getting along by eating rusty old lighters and power tools. They do not taste good, but are nutritious. My iron levels are off the bloody charts.
I may need to come steel some 😂😂😂 kill me....
Day 6821: I was on the verge of death in the desert when an old man saved me and gave me an ancient map of the location of the "*Liquid Water*"... Also got some food supplies. Planning to follow the map... Only God knows what lies ahead...
PS. Let's continue this story...❤️
@@priyambiswas9832 Day 6983: Every sand dune looks like the last, the food supplies have nearly been depleted, and I seem no closer to the liquid ice than I was a miles worth of desert ago. I've got to keep going, but I'm not sure if my body will let me.....
"off the bloody charts"😂
Day 7000: I've reached the edge of the continent. There's nothing but open ocean as far as the eyes can see, but still no Liquid Ice. The map had a big red X on the ocean. Perhaps it's underwater, like sunken treasure? At least I've made it to a town, so I can stock up and get some diving gear.
The hunt continues, but my stomach is killing me. I went to relieve myself and out came a bolt. Maybe eating those rusty power tools wasn't such a smart move after all...
These came in vending machines, I think it was a quarter, I had one 55 years ago.
yup...I got one from a "plastic ball " vending machine many years ago ..It:s in a drawer somewhere
Oh wow!! Really?
Thanks for the cool fact!👍🏼
Ok boomer
@@cloud4073 your funny
55 years ago? can i give you vietnam war flasbacks?
Wow it's so cute, I love it
Thanks buddy!
Now kiss
*furiously writes fanfiction*
Hei dude i've subscribes your channel, also odd thinkering
*insert epic handshake meme here*
This is my new favorite TH-cam channel. Extremely satisfying, high quality production, no unnecessary commentary or music. I salute you Mr. Tinkering. Thank you for your hard work for our enjoyment and entertainment.
You forgot the professional intervention of the Ducktor
4:06 ah yes bad tiny lighter parts get the piss bowl.
Bro...you're dehydrated
Lol, I was wondering what that liquid was, then I read your comment and spit out my drink 👍 thanks
It's not piss, it's "Dirty yellow human fluid"
I'd be pretty concerned if your piss was brown, you might wanna see a doctor about that one :D
Hater!
I would love to know how much time and research goes into these restorations. You are keeping history alive, that’s so cool
This unique little keychain originally had a small piece of thin black leather around the fuel housing. You can see by the little lips that protrude out. Even without it the restoration is magnificent. Appreciate your dedication to your craft. Thanks.
Hello! I was cleaning out the house of my recently deceased WW2 grandfather. I have one of these! Funny, he fought in Germany only, but his household had a lot of Japanese items. I can't wait to restore mine. It's in amazing condition.
I'm not sure why but lighter restorations are really interesting and cool. It's what brought me here after all.
Never imagined lighters being that small.
I've been wondering if you could do a Nintendo 64 restoration. I think it would be neat, and something to quell my inner fanboy.
There are loads of videos on Nintendo restoration, I don't think a console restoration would suit this channel. I come here for the lighters mainly.
@@MusicFurler he has already done console restoration lol
Unfortunately that magic field in his town only supplies him with lighters not N64's.
@@aviohebshalom3392 is this a reference to what I think its a reference to?
lol he actually did 9 months later
I have a old Zippo lighter coming and I have been watching a lot of your lighter videos to learn about them so I can be better prepared for restoring it
God damn, imagine thinking "I'm going to make a screw from scratch." Kinda blew my mind. Awesome work.
Putting lighter restorations on the map. You just raised the bar on it. Top notch 🔥💯👌
I love video light restoration. Thanks . nice video
Klasse ! Bin begeistert. Ein jedes Ding hat seinen Wert. Diese Feuerzeuge ins Leben zurück zu holen ist einfach bewunderungswürdig.
Beste Grüße, Heiko
A true testament to the quality of the old ways of manufacturing where each product is made with pride and made to last as opposed to our disposable world today....
I think this one may be my favorite of your lighters, just because of the detail on such a tiny lighter. Love it and love how you carefully restored it
Love the way you manufactured the missing screw, ingenious.
Making that screw without having machining equipment was ingenious. That's a really neat lighter, well done on the restoration.
With all these comments, I'm starting to get worried about the fact that I knew "liquid ice" is just water the first moment I saw it.
Also, that tiny lighter is one of the cutest things I've ever seen in my life. So glad you restored it.
3:18 that feels like pulling out earwax tho
This restoration is 🔥.
You make restoring a cheap lighter from the fifties a fine art
“Liquid ice” that shouldn’t be funny but it really is
Good
I’d be scare to carry that lighter in my pocket. Afraid it would come open and burn my wick off.
I'd be scare if my English was as bad as yours is.
@@aviohebshalom3392 YOU can't even spell correctly or make a sensible comment.
@@aviohebshalom3392 ah yes, becuase "I'd be scare" is proper english huh?
@@conradsmith9332 you guys are fucking stupid he spelled it like that because op spelled it like that too r/woooosh
Hahahahahahja "come off" hahahahhahaha "burn your wick off" hahaha enhlish might not be your 1st language but its fucken cute how you talk mate
"Time to make a new screw"
I guess "I make new one" was already trademarked.
our mechanics 🙌
My Mechanics woooo
I feel so peaceful watching this.
The designs of all these old lighters really do well to show how much better a design Zippos are.
A definite change in time. From made in China back to the era of made in Japan.
Made in Japan, good quality there. China sucks.
When I was growing up Japan built goods were thought to be a bit dodgy, but that quickly Changed , Japanese built good quality and became a great supplier of goods.
FUCK CHINA
when i saw liquid ice i was like "woah science is so amazing. how could they ever do that. must've took them a long time to figure out its chemical composition" and then I realized liquid ice is just water -.-
This is my favorite video so far. Lots of detail, time and explanations. You even made a new part, the screw for the mini lighter made in Japan. Amazing video!
Is it just me or does anyone else find these videos satisfying
When I read liquid ice I was like "tf does that exist?" I've never felt so stupid in my life 😂😂😂😂
My mind converted it to "dry ice" and I was left thinking "uuuuhhh...I don't think u can drink that" like the dummy I am.
me: :(
this video: tiny screwdriver for tiny lighter :)
me: :)
You know what they say about guys with tiny lighters....
Tiny flames.
Awesome video man 👌
All your restorations are aweaome the mini like this one and the war era zippos are definitely one of a kind.
Dude, you're among the best channels within this genre of videos, keep up the good work!
When I was in the fifth grade a friend had one of these I wanted one so bad that was 1957.
You have repairing lighters down to a science. Great video.
okay, this one is definitely the cutest of all your lighters.
But my fav will be always the WW1 trench lighter, that one is pure beauty.
"Normal people wants to buy a lighter " : goes to market to buy it
"ODD TIKERING" : better go to junk yard to get a nice wwII lighter
We all know who's the smarter one here though. He buys em stuff like 1% of the supposed price if it were sold correctly
My brain thought “liquid ice” was related to dry ice, so I started thinking that would be an interesting way to die. Haha Then I slapped my forehead and laughed because you were just being cheeky.
He's a trickster btw.
When you were removing the cotton(or whatever it was) from the lighter I was like those blackhead removal videos, satisfying af
Believe it or not, I used to have a lighter that was built almost exactly like that, and it was even smaller than this one. It had a wrap that was on the outside of it that had a topless lady on each side. This was back in the early 80’s, and it was an antique back then. I really wish I knew what happened to that lighter. Excellent videos, keep them coming! 👌
This has to be my favorite, convenient AND SUPER SMALL AND CUTE
He should sell his repairs, so fans can buy
this lighter is a thing of joy and beauty! What a blessing that you are able to breath life back into such old and discarded things. thank you
I can't express how enjoyable your vids are
Who rolls their lighter in dirt?
TheAxeGrinder It looked like tobacco. Maybe it was used to light a pipe or something.
maybe they tried to give it a proper burial after it met it's untimely demise. sadly wasn't able to meet it's maker but it actually got to meet a cooler maker, Odd Tinkering. so, lighter asks him. "can you give me back my soul, please :3" and Odd T. said to him "i can't, but let's make a new one". and they lived happily ever after.
And I was imagining all those dead skin cells on it.
I do.
Maybe the ones who want their video thumbnail to be more compelling..
Que genioooo 👏👏👏
un saludo grande desde Argentina 🇦🇷♥️
Watching you make pieces like the screw... You are my hero haha
The work on this was so intricate!! It is super cute!!!
Legitimately spent twenty seconds trying to figure out what Liquid Ice was.
I thought it was gonna be a quick one until he said, "let's make a screw."
You are Antique Restoration Master keep up the good work 👏
Amazing work Done 👍
Thumbs up 👍
Keep it up
👏👏👏
Have you kept all your lighters that you’ve restored?
You're the best restoration-er I've ever seen on this platform.
I mean, I've seen enough Philippinos trying to "restore" something "found" in the middle of nowhere, they even include the footage when they're finding it. To make it more believable I guess.
Most of them doesn't know what they're doing, one of them tried to measure the resistance of the board of an old beaten up smartphone with analogue multimeter.
When they're cleaning something (usually placed under water and scrubbed violently without worrying if it gets damaged)
that the serial number of the board changes.
Ye, they just scrub harshly with like a brush you'd use to clean a grill or something. Pretty sure (If it doesn't have lead) is to place it in liquid ice and vinegar is from some videos I have seen on other channels.
Hi Sir. This last one can be one of your favourites, of course. Greetings from Madrif
He is the Leonardo Da Vinci of restoration.. Amazing craftsmanship
“Liquid Ice”
*_ah yes, i do enjoy the sweet and refreshing taste of liquid ice_*
i’m *so* ashamed at how long the “liquid ice” bit went completely over my head...
i’ve brought dishonor to my family
**commits seppuku**
Dishonor on YOU, dishonor on your COW!... DOWN BESSIE! :D (10 points if you know where that's from!)
Wow. Im not into these videos much but I watched the whole thing. Very enjoyable and very skilled sir. Nice work
arguably this lighter is my fave of all of them. it’s so cute
Very cool! I love it.
Thank you
hearing him make that screw, all i could think about was the first time i broke a tap and how ashamed i was in front of everyone
I love the series of lighters you done! My favorite is probably the Trench lighter. That war flashback you had was great! Such a cool look and design to it.
That is a well made lighter. I am glad you saved it.
3 views 19 likes, just as crazy as we like it around here.
It's always like that in the beginning. The view counter is too slow
2019:"water"
2020:"liquid ice"
2077:"ice ore"
This lighter restoration is my favorite. You must get a great sense of satisfaction restoring items to their original condition or sometimes even better condition. This is the smallest one I have watched and I really enjoy your videos.
I have a fairly large collection of lighters myself (mostly early 1990's novelty lighters with a few antiques sprinkled in), so it's hard for me to say which is my favorite, I will say this one is the most impressive to date since you had so many issues and tiny parts to work with.
It’s 12:24 am and I’m here searching up what liquid ice is
I need sleep
Ground Beef I’m reading this comment at 12:25 cool
So do you buy old stuff and then burry it in dirt so it gets all rusty and beat it up to make it look even worse? I know this is a common practice among Restoration channels just curiously you do this as well?
My thought exactly. That soil washed off way to easy and revealed clean metal underneath?
Tim Nickels I have spoken to a few people that do these restoration videos. It’s a common practice to buy stuff from pawn shops and antique stores and they burry it in dirt outside for days weeks, months and even years just to get the right amount of “super old look”
I honestly don’t have a problem with it just think it’s interesting to see what people do to create content.
The novelty of this lighter is neat but I loved the restoration of the WW1 trench lighter.
Wow. Now that is an amazing restoration. Such a cool little lighter.
"Liquid Ice" ah, yes, water haha
*sips galss of whisky with solid vapor in cubic form*
Aww it's adorable!
My favourite lighter is all of them. Awesome work!!!
As always, an utterly beautiful and engrossing revival. Thanks.
I tapped on the notification as fast as I could. Originally I said something else but some nasty ass people thought something wrong....
That just sounds filthy! 😂
@@BeardyBaldyBob NO lmaooo
Hope you at least cleaned up lol
@@frozentoast8765 STOP IM DYING OF LAUGHTER
Nasty
The lighter is an accurate representation of my peter.
Small but sufficient
God bless
HAHAHA
I dont have a pwnor but i have boobs...but they're pretty darm useless at this stage of my life
'Til it gets a bit rusty from not being used. 😬
Tiny item...Big result...Fantastic Job 👍😎👍
I like this lghter. Love how you made a screw for it. Brilliant!
Why did it have loose potting soil on it? Was that just to make it look worse than it really was?
I doubt it. Mostly likely was found like that -.-
So you reckon he just found it in his garden immediately before filming? Because that dirt was literally falling off. I would bet he bought it on eBay or something and deliberately crudded it up to make his amazing restoration more impressive.
Eh maybe. He still had a small lighter to restore either way With or without dirt
Someone else pointed out it might be tobacco. Perhaps someone rolled their own cigarettes on the fly and kept this tiny lighter inside their bag of tobacco?
"It's supposed to be used as a keychain. Otherwise something this small will just get lost."
So you're telling me that if I get my hands on one of these I can lose my keys and my lighter at the same time? Well isn't that just a fantastic bargain.
Eran llavero. Tuve uno en mi infancia. Nivel de maestro, mil gracias.
This lighter and the WWI trench lighter are my favorite :) Thank you for doing these projects they’re so enjoyable to watch
Who else did the mistake of watching this while eating 😅😅😅.
Great vid tho, I keep wondering where u find these things, I feel a bit of *odd tinkering* in my brain when I think of this.
Let me get some liquid ice and my trusty toothbrush to clean something.Thank you
Looks like a souvenir from the titanic.
Very good!
Четко, красиво, с умом, руки золотые, перфекционизм а действие)