Arduino Tutorial: 10.1" TFT LCD Display RA8876 Module Touch Screen Shield 1024x600 with Arduino Due
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2019
- Where to buy
www.buydisplay.com/default/se...
Description
Spice up your Arduino project with a beautiful large display shield with built in microSD card connection. This TFT display is big (10.1" diagonal) bright (24 white-LED backlight) and colorful (18-bit 262,000 different shades)! 1024x600 pixels with individual pixel control,optional 10.1 inch capacitive touch panel.
The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any Arduino Due board.
This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.
Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. The code is written for Arduino but can be easily ported to your favorite microcontroller! - วิทยาศาสตร์และเทคโนโลยี
Buen día como puedo adquirir el Arduino shield para la pantalla tft de 10.1 pulgadas
Can this be used to display a count down timer (showing minutes:seconds). Also would need to add an ethernet shield to the Arduino (So there would be the Arduino, the Ethernet Shield, your shield and then the display), would this work?
Hi Russell, If you could add an ethernet shield and write your own software, It can be used as a timer
Can you upload with same display on waveform update rate ? Is it slow display I just purchased but pixel update is but slow don't know I am making any issue still testing
The demo code shown in the video has been uploaded to the website.Pls send your order number to if you have any questions.Thanks!!
Hi, do you know what the refresh rate is? can it reach 20/30 FPS for simple graphic purpose (displaying flight instruments, i am planning to build a home cockpit)
10.1" tft displays clock frequency is MAX 50Mhz, I'm afraid it can not support 20/30 FPS...
I bought this display but it is not compatible with the "Arduino mega" as advertised in the publication
Existing arduino examples and libraires only support working with Arduino Due board, Arduino Mega board will not work unless you shall write your own software to make it work, Thanks
Have the: SPI I2C 10.1"TFT LCD, with Arduino Shield ,and with arduino mega 2560
For more then a week now I couldn't make it display anything.
I have downloaded both files on "Tutorial - Arduino Due Libraries,Examples"
and I run it on the Arduino software.
I got this error "Ra8876_Lite.h: No such file or directory"
I copied the files into SD card and I tried to run the SD card on the Display SD slot and on the arduino shield SD slot, but it didn't work.
Can you explain how I can display the files Tutorial Libraries Examples?
Do I run the files on the Arduino software? or only I copy them to SD card?
to what name file in the SD I copy the files?
Do I put the sd card on slot of display or Arduino Shield?
Is the sd card has to be FAT32, exFAT, or NTFS?
Dear, Do you mean you ever ordered this display from us? if so, may I have your order number from us? because we need to know what's exactly you ordered from us before answering your question. Wish to have your understanding. Or pls send us the questions via email, our email ID is sales@buydisplay.com. Thanks a lot.
Is that the maximum video quality or its the running setup quality
Sorry, we didn't understand your description, could you please explain your question? Send email to sales@buydisplay.com and attend my name Janice Lee in email title. Thanks a lot
Is this compatible with Arduino uno r4 wifi?
yes, we think so
could you pass me the libraries to make use of the display?
Dear Erik
The libraries can be downloaded on the link below.Any other questions pls send us email by .Thanks!
www.buydisplay.com/serial-spi-arduino-10-1-tft-lcd-display-shield-ra8876-for-due
Can this display used with Arduino Due board?
Dear Ravi,
Yes. It could be work with Arduino Due and we have our own Arduino example+libraries for reference, pls find it at the bottom of this page www.buydisplay.com/serial-spi-arduino-10-1-tft-lcd-display-shield-ra8876-for-due. Thank you.
will we get all three things in 66 dollar?
Dear Sujoy Das
USD66.03 only cover the display module and Arduino shiled.The price will be changed if you selected the touch panel and Arduino board.Pls buy it from the link below.Thanks!
www.buydisplay.com/serial-spi-arduino-10-1-tft-lcd-display-shield-ra8876-for-due
@@buydisplay5727 Can we use this display with arduino mega ?
And does the arduino shield support arduino mega?
Dear Sujoy Das
This module need a high current support,but Arduino MEGA's current output is too small,pls use the Arduino Due board to driver this display.it matachs the Arduino shield directly.Thanks~@@sujoydas911
@@buydisplay5727 actually i am from India and i don"t have a paypal account .so how can i buy this product .
do you guys have any other purchasing platform in India
@@sujoydas911 sorry we have no distributor in india, You can pay bank transfer or Western Union or Credit card on website, Thanks
Where to buy?
here is the link where you can order online www.buydisplay.com/serial-spi-arduino-10-1-tft-lcd-display-shield-ra8876-for-due
Thanks already got one. I will re order again :)
Can i put 3mm glass panel its capacitive right?
@@djp3341 Dear Customer, Normally it is support to put less than 2mm glass panel, but if you have our display in your hand, maybe you can try it with 3mm glass panel. Thanks.
Do you have enclosure for this model?