Squarebody Overland Ignition Module install steering column wiring 73-87 Chevy/GMC
ฝัง
- เผยแพร่เมื่อ 14 เม.ย. 2022
- Starting to reorganize and install the wiring inside the truck. I hope you find this information helpful. If you have any questions hit me up on the comments or on IG. Thanks for watching and the support!
If you would like to support the channel directly
👉 / renegadehq
If you would like to check out apparel
👉 Renegadeheadquarters.com
Music
Back to earth
Music: Back To Earth (Feat. Danny Layne)
Site: icons8.com/music/ - ยานยนต์และพาหนะ
Awesome video thank you for info glad I came upon your channel take care man definitely subscribing from Northern Colorado
Your welcome. I am glad you got the info you needed! I appreciate the support brother!
thanks for the info i removed my ignition switch today found that someone put two needle bearing in there no clue what for picking new up soon
Nicely done! Really affordable part and worth just replacing in my opinion.
Do you know by chance what the black connector feeds to on the ignition switch?
Hey bud, i appreciate the video when you installed the ignition switch, and it didn't turn on the first time. What did you do to fix that issue?
The battery cable wasn’t connected 😂
Hey man love the videos. Been getting into off-roading. Trying to decide if i should buy a cheap second vehicle to mod and off-road with. That way if something breaks I can still drive my current car. Or would it be smarter to just mod my current car (Jeep renegade)? Trying to decide. Any advice would be appreciated
Thanks for reaching out to me! I have been off-roading my truck (daily driver) this whole last year. I think it depends how hardcore your going to wheel. If you want to go heavier and possibly break stuff you may want to get a second vehicle
What is pins FED grey and light green wire as well there is a black and white, orange, brown on the far end ?
Not sure what your talking about there
Any idea where the black wire with the funky connector that is dangling from the column by your hand goes?
There are a lot of wires hahaha. At what min & sec are you referring to?
Just had this happen 2:37mark..on my 84 g20..turned key and nothing..put old 1 back on nothing..ill try to adjust key switch tmrw..Anyone have any Tips?
I’ve been trying to get my steering column to lower for two months. How did you do that?
Hit me up on IG “Renegade_HQ” and I’ll send you some pics. I thought I included that info but definitely didn’t. Haha
What is the switch in the turn signal? The 3 wires coming down the column.
I think you were seeing the neutral safety switch. Plugs into the base of the steering column
On the ignition module there's the clear wire harness on the front and black on the back . On the clear 4 wire harness. What are the 4 wires controlling. 1 constant power , 1 ground, the other 2 kick on with key in on position. What are those two.
Honestly I’m not totally sure position of the wires. 1 constant power, starter, distributor, ground i believe
Im having the same issue where it will start if I have the ignition modgul hanging and pry with a screw driver, but if I install it on the column it will not start.
The push rod may not be moving properly.
Another awesome video, can't wait to see him on the trails it's going to be sick. What do you do for a living to travel so much.
I appreciate that friend! I work as an ATV/SxS tour guide in Alaska. I get out every chance I get. Haha
@@RenegadeHQ that's the life!!! I really want and is working on to becoming an bush pilot up in Alaska it's always been a dream. Hopefully it will come true.
@@polarties6637 keep focused and one day you will get it. You got this!
that cluster is about all I have in mine ,.,. cLuStEr F%$#k
Gotta start somewhere haha
Can I recommend a video that may help you, th-cam.com/video/o_pPkQz5YXc/w-d-xo.html. I believe you never had an ignition module because someone removed it, thinking it was bad. Watch this video, and I believe you have a inner linkage problem in the steering wheel. There is a round plastic gear that fits into the lever that pushes that switch rod. Yours is either worn out, or was tampered with and set back in incorrectly.
i have installed a new ignition module but when driving ithink whatever is holding the key tumbler or pushrod 'slips' intto the off position
Hmm I’m not sure what would cause that. But that sounds like a good place to start
If my control module is faulty will it cause my truck to shut off completley while driving
It totally could. Because that’s where the ignition start/off switch is and if that’s faulty it could definitely ground out and turn off the motor
@@RenegadeHQ im slightly confused, that 'control module' isnt the same thing as 'ignition control module'?