Engine Coolant Change - Peugeot 206

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ม.ค. 2022
  • Draining and refilling the radiator coolant (antifreeze) in a Peugeot 206 from 2002 to 2009. Thanks for watching. Please comment, like and subscribe !.
    All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
    © / screwsnutsandbolts 2022
    Read important information below:
    Disclaimer
    Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 93

  • @sharonmcgovern1918
    @sharonmcgovern1918 ปีที่แล้ว +4

    Thanks!

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว +2

      Thank you very much, I really appreciate it !

    • @sharonmcgovern1918
      @sharonmcgovern1918 ปีที่แล้ว

      It's only small but thank you. It was a really informative video. I've been given this car and I want to be able to take care of it and understand the workings 😊

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว

      You're very welcome, thanks again 😊

    • @josedelaluzavalosaleman8122
      @josedelaluzavalosaleman8122 ปีที่แล้ว

      @@sharonmcgovern1918

  • @markwilliams2830
    @markwilliams2830 2 ปีที่แล้ว +9

    Great step by instructions easy to follow.Thanks for taking the time to make the vid.

  • @Pitaoj
    @Pitaoj 6 หลายเดือนก่อน +1

    Thanks so much for a VERY good instructional video on replacing the coolant!

    • @screwsnutsandbolts
      @screwsnutsandbolts  6 หลายเดือนก่อน

      You're very welcome, thanks for watching !

  • @screwsnutsandbolts
    @screwsnutsandbolts  2 ปีที่แล้ว +2

    Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍
    Screwsnutsandbolts

    • @tamakitamaki295
      @tamakitamaki295 ปีที่แล้ว

      Que tipo de líquido refrigerante utilizas para el Peugeot 206 ?

  • @RC-cm1my
    @RC-cm1my ปีที่แล้ว +1

    Great video. Thanks for taking the time to make it.

  • @sendaker4541
    @sendaker4541 2 ปีที่แล้ว +1

    Thank you for your lovely asmr videos. I enjoy and learn a lot whith them.

  • @TAM-bw3bz
    @TAM-bw3bz 2 หลายเดือนก่อน +1

    Thank you for your great work!

  • @khalilbenalgia4279
    @khalilbenalgia4279 ปีที่แล้ว +1

    very instructable , very useful, thank you for sharing

  • @tompok76tompok76
    @tompok76tompok76 2 ปีที่แล้ว +1

    Thank you a lot, Tom

  • @yakupsakar6184
    @yakupsakar6184 2 ปีที่แล้ว +1

    good video, waiting for new series Peugeot 206

  • @mikelfernandez1980
    @mikelfernandez1980 10 หลายเดือนก่อน +1

    Great Video.
    Thanks

  • @gasi9613
    @gasi9613 2 ปีที่แล้ว

    👍👍👏👏 Many thank’s!

  • @user-ps6nj9jy8t
    @user-ps6nj9jy8t ปีที่แล้ว +2

    Лучший. Спасибо)

  • @TheBestDarkSide
    @TheBestDarkSide 2 ปีที่แล้ว

    Thank you!

  • @borja6083
    @borja6083 5 หลายเดือนก่อน +1

    Congratulations for the video, detailed explanations as per Haynes, Good job!. (I think it is also valid for 205 )

  • @atila8623
    @atila8623 ปีที่แล้ว +1

    Thanks a lot it's helpful

  • @sharonmcgovern1918
    @sharonmcgovern1918 ปีที่แล้ว

    Thank you 😊

  • @attouiabdou2651
    @attouiabdou2651 ปีที่แล้ว +1

    Merci 😘

  • @hectorherbert6585
    @hectorherbert6585 ปีที่แล้ว +1

    very clear vid..I wanted to say that since access is made easy changing to a new thermostat (89°c) is a good idea to complete the full task..and watch out for that engine block torx bleed screw..she's 'fragile'..!!

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว

      Thanks for watching !

    • @chrisgill7123
      @chrisgill7123 ปีที่แล้ว

      Great video.Good camera angle,good explanation step by step❤

    • @vegitoisbaas
      @vegitoisbaas 8 หลายเดือนก่อน

      I have noticed it is fragile🥲 still got it to work

  • @goodwillhunting9572
    @goodwillhunting9572 7 หลายเดือนก่อน +3

    Weird that my mechanik lied me, i gave car to change coolant liquid, he did but on papers he gave its written charge is only for 1litre liquid 😅

  • @braizat
    @braizat 2 ปีที่แล้ว +2

    Me gustaría ver el video pero al 308
    Gracias

  • @amanda1100
    @amanda1100 24 วันที่ผ่านมา +1

    Thanks dude my Peugeot is 13 years old and now its starting to get some small mistakes so ur vids help me alot how many vids u did for the Peugeot 1.1?

    • @screwsnutsandbolts
      @screwsnutsandbolts  23 วันที่ผ่านมา +1

      You're welcome. I think I did about 40 videos on the Peugeot 206

  • @studio1998clv
    @studio1998clv 3 หลายเดือนก่อน

    how do i know if i have 1.4 sohc or 1.4 dohc?

  • @fouzaialaa7962
    @fouzaialaa7962 2 ปีที่แล้ว

    thank you for this video ive been looking for the bleed valve for a few days
    i have a 206 with 1.1 engine ...my problem is i feel like the fan turns on too late .... i read online that the medium intensity fan turns on at 85 to 90 .... mine turns on at half intensity at 100 degrees and at full blast at 110 degrees .... do you have any idea why it does this ??

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว +1

      It could be a faulty thermostat, coolant temperature sensor or something else

    • @ethanmccrory2088
      @ethanmccrory2088 2 ปีที่แล้ว

      Mine is exactly the same. Coolant looks dirty so gonna change it and see if that helps

    • @tamakitamaki295
      @tamakitamaki295 ปีที่แล้ว

      Cambiar sensor de temperatura

  • @wowftw120
    @wowftw120 2 ปีที่แล้ว +1

    Why do I have to remove the air filter? Can't you just bleed it from the bottom?

    • @FIXnMIX.
      @FIXnMIX. 2 ปีที่แล้ว +1

      He did that to unscrew the second bleed nut on the left side of the cylinder

  • @giveaf9370
    @giveaf9370 2 ปีที่แล้ว

    The coolant in my expansion tank is like frothy. How do I flush this from the cooling system please?

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      Did it become frothy after you changed it or was it already frothy ?. If so it could be a sign of an underlying issue. Check this link: askinglot.com/what-does-it-mean-when-your-coolant-is-foamy

  • @user-vw7ex9ty4m
    @user-vw7ex9ty4m 2 หลายเดือนก่อน

    this is not correct since the antifreeze was not completely replaced! How much antifreeze did you drain? 2-3 liters?

  • @e.s.1321
    @e.s.1321 2 ปีที่แล้ว +1

    Hi, how can I recognize if the engine is 1.1 or 1.4 ?
    Tks

  • @FAB1150
    @FAB1150 ปีที่แล้ว +1

    What type of coolant do you use? I really can't find the info online. Thanks!

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว +2

      The manual recommends BASF Glysantin G33-23F or Gurit Essex Revkogel 2000 or equivalent.

  • @martymartin2894
    @martymartin2894 6 หลายเดือนก่อน +1

    Mine is 307 and was easier to get to the bleed screw on the thermostat than on this one.

  • @danalvesDR
    @danalvesDR 2 ปีที่แล้ว

    Do you recommend G11 or G12 coolant for a petrol 1.1 206?

  • @ErnestoBorreroGomez
    @ErnestoBorreroGomez หลายเดือนก่อน

    Buenos días. Me puedes indicar cual es la referencia del sensor de dirección hidráulica para un Peugeot 204 1.4 gasolina?. Espero su respuesta. Gracias.

  • @SmAEsch0R
    @SmAEsch0R 2 ปีที่แล้ว

    thanks

  • @uroskostic8570
    @uroskostic8570 2 ปีที่แล้ว +9

    Why is everything on French cars more complicated than on other cars?

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      I don't know, I really don't lol. Have you seen a video on changing the air filter on a Peugeot 308 ?......now there's a complicated job !

    • @uroskostic8570
      @uroskostic8570 2 ปีที่แล้ว

      @@screwsnutsandbolts my sister owned 308 and it burned oil like it was two stroke :))) hahahah ...I own Lancia Kappa 2.0 5.20 ...even with massive 5 cylinder engine, everything is on hands reach.

  • @christma4857
    @christma4857 6 หลายเดือนก่อน

    my fan isnt turning on and off after following all the steps at the end, does this matter that much?

    • @screwsnutsandbolts
      @screwsnutsandbolts  6 หลายเดือนก่อน

      Maybe the engine isn't getting hot enough ?

    • @christma4857
      @christma4857 6 หลายเดือนก่อน

      @@screwsnutsandbolts no idea, maybe not because it was a cold day, I did rev it for quite a while

  • @andresyopasa2337
    @andresyopasa2337 2 ปีที่แล้ว +1

    Hola, cómo se llama la espuma que tiene de protección la manguera desfogue 8:22

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว +1

      It's called pipe foam insulation: www.google.com/search?q=pipe+foam+insulation&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjCj-2n9r33AhVPasAKHWyKCM8Q_AUoAXoECAEQAw&cshid=1651395185137399&biw=1536&bih=722&dpr=1.25

    • @andresyopasa2337
      @andresyopasa2337 2 ปีที่แล้ว

      @@screwsnutsandbolts Thank you

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      You are welcome :)

  • @drumchapelboy
    @drumchapelboy 18 วันที่ผ่านมา +1

    think I might give it a miss and just keep topping up too much work. car makers don't make it easy.

  • @c_ibrahim_yildirim_c6737
    @c_ibrahim_yildirim_c6737 7 หลายเดือนก่อน +1

    👍

  • @yyvv1488
    @yyvv1488 2 หลายเดือนก่อน

    Y EL CHAMPÚ PARA LOS VIDRIOS DONDE SE ECHA?

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 หลายเดือนก่อน

      This video will help: th-cam.com/video/WloIXhZF1Pk/w-d-xo.html

  • @skatehero7703
    @skatehero7703 ปีที่แล้ว

    hello my car is 2002 model 1.4 petrol. What type of cooler should I use?

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว

      The manual recommends BASF Glysantin G33-23F or Gurit Essex Revkogel 2000 or suitable equivalent

    • @skatehero7703
      @skatehero7703 ปีที่แล้ว

      @@screwsnutsandbolts Are there any new products with these approvals?

  • @AngelaBozhinovska
    @AngelaBozhinovska 7 หลายเดือนก่อน

    Is this same on 206+, 2011 ?

    • @screwsnutsandbolts
      @screwsnutsandbolts  7 หลายเดือนก่อน

      I'm not sure about the newer model, sorry.

  • @balazskurtos4972
    @balazskurtos4972 2 ปีที่แล้ว

    And the 1.9d?

  • @Satu368
    @Satu368 ปีที่แล้ว

    G13 Coolant Liquid....

  • @Kamal_Esedullayev
    @Kamal_Esedullayev หลายเดือนก่อน +1

    👍🫡