Doctor D.S. its struggling for air intake because you fucked up the back pressure. I did this last year using a high performance scooter muffler on one of my husquaverna trimmers and after tinkering with a few things like a larger fuel line that is braided stainless steel, opened up the air intake and installed a multistage/terminal spark plug and put a crossdrilled saw blade and aluminum chain saw blade(2) and I use it on jobs where I'm clearing out high brush/thicket. People ask me a lot "wtf is that?" Lol. Works really good for what I use it for.
Doctor D.S. The ideea is great,only one BAD thing you did...you used very thick materials and that will be very overheating after 30 minutes of work,BAD RESULT,good result you get if you are using (maximum) 0.8mm steel sheet,otherwise the muffler will overheat very bad because cannot cool fast enough due the thickness of the materials...consider this as one of my previous experience with a home made (similar type of build) muffler on a chainsaw,great noise reduction (without loosing power) but severe overheat 20 minutes later...the plastic case around started to melt and i stopped the engine and water spray to cooldown the muffler mounting back the original muffler was a better ideea untill i built a new muffler but with thinner materials (this time welded with oxyacethilenic torch),with 0.6mm steel sheet and 0.8mm wall thickness pipe,that was a HUUGE improovement,after 7 years,that muffler still sits on the chainsaw,haven't used since 3 years because i moved on city with rent apartment. But the building ideea is great !
The new muffler you made is more like silencer for 4 stroke engine. I believe your engine is 2 stroke. In 2 stroke engine you need resonance chamber before the silencer, otherwise your fuel consumption will be higher and your engine will loose power at certain rpm.
@@ksich8142 no. That is maybe the general idea of that a muffler is the box at the end of the exhaust. A muffler is technically a silencer or something to reduce noice. When you are talking about making it louder you are using a resonator made specifically to make the noise louder, as a normal resonator is made to make it less loud.
@@henninghellerud not necessarily as resonators are typically used to muffle the sound at different rpm ranges/frequencies. Usually the louder and faster sound waves are captured by the resonator then the muffler receives the lower end of frequencies
NOW ALL the you need is chrome handles, dual intake, bigger yard rope head, chrome plated of course, 3rd stage wing, and a hand brake for those really big drifts, around those trees and bird baths, your all set!!!
That exhaust is not a bad idea at all! It will definitely get the heat out of that cylinder better than the stock can ever will. Might be slightly louder but it will help the engine last longer as long as the carb gets adjusted after the mod to compensate for the better flow.
A burn is the worst pain there is. And you have for sure got something right there that when it burns you your gonna wear the mark the rest of your life👆💯
A lot of these Guys in the comments don’t understand that this was just a little project and something fun to do for a video. You guys act like this is a car or dirt bike or something lol just let the man have his fun crafting sheesh.
Dude, don't let the comedy club get you down, most of them couldn't wipe their .... I think you are quite intelligent and you may invent something that everybody wants. Then who is laughing! Well done!
Yeah I think you need to test it in the same spot .not surprised it sounded a crap ton louder in your shed than the first test you did completely outside
If u want to do an exhaust on a 2 stroke engine, atleast make an expansion pipe so you also gain allot power. Now the only thing you gained is allot of extra weight with no benefits at all...
the shanks are made of thinner sheet metal. The idea may be good, but it is not an industrial ending. the mower has an additional load of at least 2.5 kg.
Exhausts designs are governed by a lower and upper limits at the factory. Its not just a matter of drilling holes in a pipe and making one in the shed. If a system allows too much free flow then fuel economy suffers with less power output. If it is constricted then the engine will overheat, so the engineers tune exhaust systems to suit specific applications. It is best to fit factory exhaust systems, and you can get aftermarket "silent" types for most small engines.
that will destroy your saw, 2stroke exhausts are carefully calculated pieces of art to get the best performance out of the enigne. this is just plain stupid.
The fuel mixture is way off now maybe a smaller pipe with a smooth transition to expansion chamber would give you the performance your looking for. But that engine does not have the displacement for you current set up
Young men I am so impressed. Keep thinking out of the box and spend as much time you can in the garage. This is what I would tell my son if only I could get his assss off the IPHONE. Guys like you contribute to this society and create a future. Ignore the wig heads that give a dislike.
Remember, hobbies change. If you want you son's attention then dont pester him about it, it only makes him hate your hobbies even more. Let him see how cool it is by just doing it. If you never bring it up then he will want to learn
Поздравляю, стало тише на 01% + тяжелее + замучишься чистить. Взми простой баллон воздухоочистителя, и трубку(можно сварить из жестянки) больше диаметром выхлопной чтобы надевалась и фиксировалась сбоку болтом, можно металлический хомут что на патрубках в машине, тогда на трубе пропели щели для сжима трубы. Далее: на этой трубе сверлишь отверстия по размеру баллона и загоняй трубку в баллон по краям для фиксации хомуты. Вот и всё. Сгорит баллон, заменить нет проблем. Чем длиннее, больше в диаметре баллон, тем тише, но вывод газов замедлится, а это потеря мощности и образование нагара. Тогда придётся ставить турбину. Лучще от феррари или болида F1, но тогда тебе понадобиться костюм космонавта с кислородными баллонами и якорь для остановки. Удачи. Музон прикольный👍🔥
@@ronrampfel8226 Should of at least made it a double pass ie.. 2 tubes. Offret would of been a bit different but may of helped out instead of cutting shroud away. Even a side entry would of worked. Mind you, it wont rot out in a hurry lol
Good job. The 2 things i have to comment about. 1 surface prep, grind the paint or rust off. 2 do an undercut when grinding so when you weld it fills the groove. this makes a stronger bond and wont be removed when grinding away excess. good job once again
Nicely done... I was thinking of changing a better muffler on my brush cutter, but I lack the tools and skills of welding 😁. BTW, should always set the camera with the brighter side behind the camera. With the camera in your workshop facing outside, what's being focus in the works appears darker and lost resolution. Anyway thumb up for sharing this.
new exhaust on it you need to adjust the carb a bit to max the idle and full throttle performance. Same like motorcycles and cars. They all need a tune when intake or exhaust are modified
Come back with a follow up on this muffler, say when your engine's combustion chamber & piston has overheated (due to excessive exhaust back pressure) and your engine is totally destroyed... after maybe 10 hours??? :(
Молодой, горячий парень. МОЛОДЕЦ! Как я понял, не нравился звук выхлопа, мерзко истерическо-визжащий. А сделал глушак со спокойным, размеренным дыханием и приятным звуком. Правда из такого толстенного железа, что и правнукам хватит!!! :) А так молодца!!! :)
Homemade Chain for TRIMMER ? + TEST
th-cam.com/video/QNxGD9yCc2Y/w-d-xo.html
Doctor D.
Looks pretty cool to me if do it just to pass off my mom lol
Tyler Stewart
Doctor D.S. its struggling for air intake because you fucked up the back pressure. I did this last year using a high performance scooter muffler on one of my husquaverna trimmers and after tinkering with a few things like a larger fuel line that is braided stainless steel, opened up the air intake and installed a multistage/terminal spark plug and put a crossdrilled saw blade and aluminum chain saw blade(2) and I use it on jobs where I'm clearing out high brush/thicket. People ask me a lot "wtf is that?" Lol. Works really good for what I use it for.
Doctor D.S. K
Isn't a muffler supposed to silence it?
*task failed successfully*
It is a custom muffler you know what they say about custom mufflers its the opposite of silent lol
Homemade DOUBLE Exhaust MUFFLER For Trimmer ? :D
th-cam.com/video/RXmV_QY9-jw/w-d-xo.html
Doctor D.S.
The ideea is great,only one BAD thing you did...you used very thick materials and that will be very overheating after 30 minutes of work,BAD RESULT,good result you get if you are using (maximum) 0.8mm steel sheet,otherwise the muffler will overheat very bad because cannot cool fast enough due the thickness of the materials...consider this as one of my previous experience with a home made (similar type of build) muffler on a chainsaw,great noise reduction (without loosing power) but severe overheat 20 minutes later...the plastic case around started to melt and i stopped the engine and water spray to cooldown the muffler mounting back the original muffler was a better ideea untill i built a new muffler but with thinner materials (this time welded with oxyacethilenic torch),with 0.6mm steel sheet and 0.8mm wall thickness pipe,that was a HUUGE improovement,after 7 years,that muffler still sits on the chainsaw,haven't used since 3 years because i moved on city with rent apartment. But the building ideea is great !
Doctor D.S. tkcdzj7ivan
Doctor D.S.
Paola Volker Chào
Зато по хрдкору
It sounds like Honda civic . Good job
The new muffler you made is more like silencer for 4 stroke engine. I believe your engine is 2 stroke. In 2 stroke engine you need resonance chamber before the silencer, otherwise your fuel consumption will be higher and your engine will loose power at certain rpm.
What he made is just a fancy straight pipe…
Hey buddy. I think you are confused as to what the word “muffler” means.
A muffler can be made to make more noise or less
I've never heard anyone say '"let's muffle this thing nice and loud"
@@ksich8142 no. That is maybe the general idea of that a muffler is the box at the end of the exhaust.
A muffler is technically a silencer or something to reduce noice. When you are talking about making it louder you are using a resonator made specifically to make the noise louder, as a normal resonator is made to make it less loud.
@@henninghellerud not necessarily as resonators are typically used to muffle the sound at different rpm ranges/frequencies. Usually the louder and faster sound waves are captured by the resonator then the muffler receives the lower end of frequencies
Is a mini chairy bomb muffler look it up you can buy them
NOW ALL the you need is chrome handles, dual intake, bigger yard rope head, chrome plated of course, 3rd stage wing, and a hand brake for those really big drifts, around those trees and bird baths, your all set!!!
"A grinder and paint...makes me the welder I ain't". Nice work man.
That exhaust will burn the piston out in a season of regular use. 2 stroke motors need specific exhaust if they don’t have expansion chambers
please shut up.. exhaust is exhaust..
You’re right
@@nadoveza4961 and you is stupid :)
What year Honda Civic is that
Not only is it heavier now, I am dumber now for watching the whole thing!
hehehehe aha haha aha hahaha
You saved me, thank you
This muffler doesn't do anything. It can only reduce the power od the engine itself. 2t engines requier resonating muffler.
choking the exhaust. the revving at the end of the video was required or it would stall out. I recognize that sound.
You dropped a good 2dB mate. The paintjob is badass tho.
How to rice out your trimmer
Excuse me? That's some glorious 2 stroke sound
That exhaust is not a bad idea at all! It will definitely get the heat out of that cylinder better than the stock can ever will. Might be slightly louder but it will help the engine last longer as long as the carb gets adjusted after the mod to compensate for the better flow.
All that work FOR NOOOOTHING 👌👌👌👌😏😏😏😏😏
That metal is so thick it should last about 2000 years😂
You want a trimmer with two Exhaust?????? XDDDD
How to double the weight of your mower.
New Stihl racing exhaust available on your nearest workshop!!! Awesome dude! I really like it👍👍
A burn is the worst pain there is. And you have for sure got something right there that when it burns you your gonna wear the mark the rest of your life👆💯
That is quite a burn hazard mate
Id cook my arm either way.
Weeds are shaking with terror… neighbors are jealous
Ha ha ha ha.. Epic sound. Dude you are crazy.. in a good way.. nice job. ha ha ha.
Smart build... Any DB ratings to know for sure if the volume of sound was deadend?
One question, does the muffler serve as a leaf blower?
Just as loud, and nice when you touch it on your bare arm.
Che cose
Kad sam cuo za ovo na podcastu odma sam iso gledat, ovo je legendarno hahahah
hahahaha
A lot of these Guys in the comments don’t understand that this was just a little project and something fun to do for a video. You guys act like this is a car or dirt bike or something lol just let the man have his fun crafting sheesh.
Congratulations! Your weed eater is now ready to compete in the Indy 500!🤣
Dude, don't let the comedy club get you down, most of them couldn't wipe their .... I think you are quite intelligent and you may invent something that everybody wants. Then who is laughing! Well done!
Glasspack nice!
Only problem is the glass wool will be soaked in oil over time May be quieter too?
terry jenkins it would make it louder that's why with two stroke exhaust you have to repack them
Here I am thinking it was gonna be a video on making it quieter... I guess I was wrong 😂
hahahahaha xd
Me to ....
I'm no welder, but I don't think you had the amps up enough. You kept sticking!
Also, was there any real difference? To me it sounded louder.
Completely ridiculous, not even slightly practical, but I absolutely love it.
Yeah I think you need to test it in the same spot .not surprised it sounded a crap ton louder in your shed than the first test you did completely outside
If you wanna compare...
00:16 Before
12:04 After
@off spec 😆
Sounds the same to me
@@michaelsacy5849 Have to agree
@@michaelsacy5849 my headset says its not the same lol..its louder on the after
If u want to do an exhaust on a 2 stroke engine, atleast make an expansion pipe so you also gain allot power. Now the only thing you gained is allot of extra weight with no benefits at all...
I've been wanting to put a power pipe on my whipper from a RC car with a whipper snipper motor lol that would make more sense
Not necessarily it would make more power just not as much an an expansion chamber
Следующий раз банку от противогаза приделай, лайк за бестолковые труды
the shanks are made of thinner sheet metal.
The idea may be good, but it is not an industrial ending.
the mower has an additional load of at least 2.5 kg.
Глушитель весить будет как триммер в сборе 😂
It legit sounds like a Mazda rotary engine. That's lit
Hahahaha xd
I like it. It sounds way better
what was the point of that ? thought it was going to be quieter
Cool man , put some wheels on her. ...... nice job bro
Holly Sh.... It's workin WOW❗👍
Толщина металла маловато.надо было с 10ки делать.
Согласен, как то не то 😂
You're suppose to make a 2 stroke pipe... not a muffler
I can safely say . You can rice out anything 😂
Clint Tester lmaoo
Cool idea and for fun, I'd do something similar just to annoy my fancy neighbors with the electric trimmer. Well done mate!!
Музон ваще зачётный 💥👍🏄♂️💥
Don't know why people doing this for garden tools but okay. You lose power with this exaust and ist not really compact with this pipe.
Sounds better than most Honda cars
Por que o cara colocou um escapamento esportivo numa roçadeira? 🤔
Its rather contrary to make a motor quieter but subject your viewer to rock music when the sounds of production were more appropiate. But nice work !
Exhausts designs are governed by a lower and upper limits at the factory. Its not just a matter of drilling holes in a pipe and making one in the shed. If a system allows too much free flow then fuel economy suffers with less power output. If it is constricted then the engine will overheat, so the engineers tune exhaust systems to suit specific applications.
It is best to fit factory exhaust systems, and you can get aftermarket "silent" types for most small engines.
Mohabat khan Malak baby baby do biroleibew
Are your arm burns healed up yet?
Если была идея увеличить вес, то можно было прицепить гирьку кила на два, а так звук почти тот же. Вывод, убитое время, натруженное плечо.
Полностью согласен. Результат нулевой
that will destroy your saw, 2stroke exhausts are carefully calculated pieces of art to get the best performance out of the enigne. this is just plain stupid.
Hmmm. I think not.
hello bud dummys--don't know that people 50 years 10 and up did
Just add a heatproof pipe to the exhaust and you have yourself, a dual grass strimmer/leaf blower. Nice 👍
Делай съёмный,и металл тоньше!👍
Now it looks just like a Honda civic
:D
Now that you've made a race muffler, try out a baffled silencer type muffler with spark arrestor and see if you can quiet it down a lot.
About or even louder than the standard muffler. But you definitely put some more weight to the Trimmer.
vonKragh j*
The fuel mixture is way off now maybe a smaller pipe with a smooth transition to expansion chamber would give you the performance your looking for. But that engine does not have the displacement for you current set up
You now have more HP than most of the Honda cars out there.
Young men I am so impressed. Keep thinking out of the box and spend as much time you can in the garage. This is what I would tell my son if only I could get his assss off the IPHONE.
Guys like you contribute to this society and create a future. Ignore the wig heads that give a dislike.
Remember, hobbies change. If you want you son's attention then dont pester him about it, it only makes him hate your hobbies even more. Let him see how cool it is by just doing it. If you never bring it up then he will want to learn
Also forcing it will make him never want to see a garage in his life so dont ruin that for him
Этого автора надо к доктору Дью сводить😅
Толку почти ноль. А вот как себя поведет поршневая на бедной смеси это скоро увидишь.
Да. К сожалению движок бензокосы слабоват для нормального глушителя
Хорошая работа 👍👍👍
Nice work. ¿Did throttle response or power improve? Thanks for making & posting this video.
Поздравляю, стало тише на 01% + тяжелее + замучишься чистить. Взми простой баллон воздухоочистителя, и трубку(можно сварить из жестянки) больше диаметром выхлопной чтобы надевалась и фиксировалась сбоку болтом, можно металлический хомут что на патрубках в машине, тогда на трубе пропели щели для сжима трубы. Далее: на этой трубе сверлишь отверстия по размеру баллона и загоняй трубку в баллон по краям для фиксации хомуты. Вот и всё. Сгорит баллон, заменить нет проблем. Чем длиннее, больше в диаметре баллон, тем тише, но вывод газов замедлится, а это потеря мощности и образование нагара. Тогда придётся ставить турбину. Лучще от феррари или болида F1, но тогда тебе понадобиться костюм космонавта с кислородными баллонами и якорь для остановки. Удачи. Музон прикольный👍🔥
Please show us the way Sir. You must tag me when you post your video. Thanks!
Is it me, or did he make it louder?
That’s what I thought. Changed the sound, didn’t make it quieter tho.
@@ronrampfel8226 Should of at least made it a double pass ie.. 2 tubes. Offret would of been a bit different but may of helped out instead of cutting shroud away. Even a side entry would of worked. Mind you, it wont rot out in a hurry lol
Erorre!
That muffler may be just what I need for my loud-mouth mother-in-law
LMAO.
Good job. The 2 things i have to comment about.
1 surface prep, grind the paint or rust off.
2 do an undercut when grinding so when you weld it fills the groove. this makes a stronger bond and wont be removed when grinding away excess. good job once again
GREAT IDEA & CONGRATULATIONS FOR ....PROVING YOUR CONCEPT!!!
Sounds like a supercharged wasp 😂🐝
hahahahaha XD
Nice honda
What's the 0-60 on that thing
About 3.4 seconds
Probably the best idea so far.
Dobje brate super👍👍👍👍👍
Hvala ti
Glade i didn't watch the entire video and skipped to the end , would of been disappointed
Let’s see you make one out of carbon fiber like Yoshimura.
Ohoooo maybeeee :D
Sounds louder.
Much louder.
Who wants that?
Burt Hulbert me
Majstore, odkud si ti. Ideja mi je super, svaka čast.
Hrvatska , Virovitica ;)
Hvalaa
Great job, very functional. Like the way you go about
There's no point putting muffler onto the trimmer, other than making your neighbors think that you have a motorcycle.
я думал тихо будет а тут как танк
Homemade Yoshimura or Akrapovic for grass cutter.😁
How many engines do u buy per season now?
Cool. I'd get an electric though. Ive got a Dewalt 60v max weed-eater, lasts a long time, and no noise other than the whish of the string
Who do you think you're kidding? It's a different noise but those electric trimmers are nearly as loud as the 2-strokes.
@@tinman1955 Nope. Nowhere near as loud.
Cool does it go faster
Gostei da sua idéia, porém poderia ser a chapa de inox e mais fina, seria menos pesado,👏👏👏👏🇧🇷🇮🇱🇺🇸.
So a civic?
Nicely done... I was thinking of changing a better muffler on my brush cutter, but I lack the tools and skills of welding 😁. BTW, should always set the camera with the brighter side behind the camera. With the camera in your workshop facing outside, what's being focus in the works appears darker and lost resolution. Anyway thumb up for sharing this.
new exhaust on it you need to adjust the carb a bit to max the idle and full throttle performance. Same like motorcycles and cars. They all need a tune when intake or exhaust are modified
Come back with a follow up on this muffler, say when your engine's combustion chamber & piston has overheated (due to excessive exhaust back pressure) and your engine is totally destroyed... after maybe 10 hours??? :(
right on people now days not that smart people 50 years ago would-ua woop-ed him good for being so stupid !
You need to install a muffler on that music.
I'm sure your neighbors are going to really enjoy hearing that machine every time you do your yard work.
Of course they’re going to love it it’s three times as loud stinks five times as much I mean who wouldn’t like that
Молодой, горячий парень. МОЛОДЕЦ! Как я понял, не нравился звук выхлопа, мерзко истерическо-визжащий. А сделал глушак со спокойным, размеренным дыханием и приятным звуком. Правда из такого толстенного железа, что и правнукам хватит!!! :) А так молодца!!! :)