Thanks for the video Al! I know you are trying to avoid a "can of worms", and yes, it is more work, but if you don't take the trim off around that vinyl top and address the rust underneath it will almost immediately spread to the new paint. You can't just tape off rust :) In fact, to do it right, the front and rear glass should be popped out and the vinyl top should come off all together. There's a ton of rust under there that needs to be addressed. These semi-original cars are becoming too rare to do a late 80's (technique and approach) refresh to. I know you are a flipper, but still. Just my humble opinion. My Grandfather always said, "if you aren't going to do it right, don't do it at all". A lost art of course :)
Hi AL scraps is really coming along . Nice job today and it’s always nice to see your son helping out Dad .. I wanted to tell you my 2 sons live far from me and it’s good to hear there doing well .. My oldest son went to college and he’s doing well and my other son is getting married next year… They grow up so fast AL and I went into the military right after high school cause I needed to be put on the right track if you know what I mean lol…. I put models together on my spare time and I have close to 30 models I did this year done… I haven’t done a 60s Camaro yet but I will soon .. I will keep watching you knock out things on SCRAPS .. Enough BABBLING AL and you take care please say HI to your son for me… Your friend Bob from Illinois…
@@spungebob24 Hello Bob hope all is well. Yes I remember you saying you build models. I have a few to build my kids bought me and as soon as I get a chance I’m starting on one. It’s always nice seeing your comments. Thank you as always and have a great weekend 👍🏼AL
Awesome video Al!! The body work on Scraps is coming along really nice, like you said a little bit a day gets it done, you had a very productive day for sure, thanks for sharing and thanks!! Lol!! Have a great weekend bud!!
I thought for sure you would use that orange passenger door on the wall on scraps it would save alot of time and make a much better job in the long run. It's coming along fine. I'd love to co.e paint that car for you.
@@richardsmith-qy6vl Hello, I didn’t think the door was so bad until it was all stripped down but it’s ok it should look ok when it’s done 🤞 thank you as always and have a great weekend 👍🏼AL
@@ronmiller1162 It actually works really good but the paint was like glues so it was fighting but it comes off with a little work. Thank you and have a great weekend 👍🏼AL
have a great weekend al,looking real good.oh,a little tid bit. my gf's father served in ww2 with the inventor of bondo. he wanted to partner with him in his new idea,my gf's father passed on the offer and regretted it later on.
@@tonypuskadjia868 Good morning. No we didn’t but one day will sit down and try a live stream. I don’t think anyone will figure out what we did for a living LOL. Thank you very much for watching. Have an awesome weekend 👍🏼AL
@@christopherohara9421 You are so right. I painted a car about 30 years ago for a friend and it still looks great. Thank you for watching. Have a great weekend 👍🏼AL
Cars are like some women, a little powder a little paint, make em look like something they ain’t! LOL 😂 I’m gonna hear it for that one! 🤣 But in the serious side, nice job, it’s coming along very nicely!👍
Looks great Al. 👍
@@VinoRatRodbuilds Thank you very much Robert. Have an awesome weekend 👍🏼AL
Thanks for the video Al! I know you are trying to avoid a "can of worms", and yes, it is more work, but if you don't take the trim off around that vinyl top and address the rust underneath it will almost immediately spread to the new paint. You can't just tape off rust :) In fact, to do it right, the front and rear glass should be popped out and the vinyl top should come off all together. There's a ton of rust under there that needs to be addressed. These semi-original cars are becoming too rare to do a late 80's (technique and approach) refresh to. I know you are a flipper, but still. Just my humble opinion. My Grandfather always said, "if you aren't going to do it right, don't do it at all". A lost art of course :)
I really enjoy watching scraps come together. Everything you do is making it look great can’t wait for the next video 👍
@@jerrysands4662 Thank you very much for watching. Scraps is slowly getting there. Have a great weekend 👍🏼AL
You are talented Al. Mike in Cali.
@@chs82ndab Hello Mike. Thank you as always for your kind comments. Have a great weekend 👍🏼AL
Looking good Al, coming together pretty darn nice, I know you still have a long way to go but it's coming out great.
@@ronmurphy4855 It’s slowly getting there. Thank you very much. Have a great weekend 👍🏼AL
Great job as usual Al and love watching your son jump in there giving you a hand.
@@ClintPosey It’s always awesome when he gives me a hand, we usually get a lot done together. Thank you for watching. Have a great weekend 👍🏼AL
Hi AL scraps is really coming along . Nice job today and it’s always nice to see your son helping out Dad .. I wanted to tell you my 2 sons live far from me and it’s good to hear there doing well .. My oldest son went to college and he’s doing well and my other son is getting married next year… They grow up so fast AL and I went into the military right after high school cause I needed to be put on the right track if you know what I mean lol…. I put models together on my spare time and I have close to 30 models I did this year done… I haven’t done a 60s Camaro yet but I will soon .. I will keep watching you knock out things on SCRAPS .. Enough BABBLING AL and you take care please say HI to your son for me… Your friend Bob from Illinois…
@@spungebob24 Hello Bob hope all is well. Yes I remember you saying you build models. I have a few to build my kids bought me and as soon as I get a chance I’m starting on one. It’s always nice seeing your comments. Thank you as always and have a great weekend 👍🏼AL
Awesome video Al!! The body work on Scraps is coming along really nice, like you said a little bit a day gets it done, you had a very productive day for sure, thanks for sharing and thanks!! Lol!! Have a great weekend bud!!
@@chuckypaonita7974 Thank you Chucky and have a great weekend 👍🏼AL
Good job as usual.
@@69bjgmopar Thank you very much. Have a great weekend 👍🏼AL
Looking great
@@stevereid53 Thank you. Have a great weekend 👍🏼AL
Gm Al, that front fender turned out nice. She’s gonna look real nice when it’s all finished. Great job as always enjoy your day 👍🏾😊
@@paulhammond3488onetime Thank you very much. Have an awesome weekend 👍🏼AL
Nice one Bud Have a good weekend ✌️
@@lonniekiser3612 Thank you very much. Have a great weekend 👍🏼AL
Nicely done brother
@@firstgenerationgarage2803 Thank you louie. Have an awesome weekend 👍🏼AL
great job on the dents
@@garyburnham-j9d Thank you very much. Have a great weekend 👍🏼AL
Numero uno
@@jamesgrant9317 Thank you very much. Have a great weekend 👍🏼AL
Very cool giving him those panels. Very nice. I need a 6.0 ls?
I thought for sure you would use that orange passenger door on the wall on scraps it would save alot of time and make a much better job in the long run. It's coming along fine. I'd love to co.e paint that car for you.
@@richardsmith-qy6vl Hello, I didn’t think the door was so bad until it was all stripped down but it’s ok it should look ok when it’s done 🤞 thank you as always and have a great weekend 👍🏼AL
nice work on the paint remover tool i guess the good things is it dont produce any heat and your not loosing any metal thickness
@@ronmiller1162 It actually works really good but the paint was like glues so it was fighting but it comes off with a little work. Thank you and have a great weekend 👍🏼AL
have a great weekend al,looking real good.oh,a little tid bit. my gf's father served in ww2 with the inventor of bondo. he wanted to partner with him in his new idea,my gf's father passed on the offer and regretted it later on.
@@sprintcarsandguitars959 Wow now that’s a great story. Thank you for sharing. Have a great weekend 👍🏼AL
Great job Al. Do you work as an autobody tech? What brand of body filler are you using? Take Care
Hi al just wondering did you & Mr Willson work at Gm plant
@@tonypuskadjia868 Good morning. No we didn’t but one day will sit down and try a live stream. I don’t think anyone will figure out what we did for a living LOL. Thank you very much for watching. Have an awesome weekend 👍🏼AL
TC global paint you can still buy lacquer paint I love old school lacquer paint sand and polish and it looks beautiful
@@christopherohara9421 You are so right. I painted a car about 30 years ago for a friend and it still looks great. Thank you for watching. Have a great weekend 👍🏼AL
Cars are like some women, a little powder a little paint, make em look like something they ain’t! LOL 😂 I’m gonna hear it for that one! 🤣 But in the serious side, nice job, it’s coming along very nicely!👍
@@Musclecar1972 I’m still laughing LOL. Thank you very much for watching. Have a great weekend 👍🏼AL
@ My pleasure Al, have a great weekend! 👍