Nissan Sun Visor Repair Replace | $30 Most Models
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- $35 - Quickly repair your car sun visor problem with a new replacement for Nissan Altima, Pathfinder and other models.
VISORS :amzn.to/3yKCS2z Tool: amzn.to/3ngGRLj TOOL USE: • Nissan Sun Visor Repla...
Socket Wrench Screw (includes 9/32)
amzn.to/3nij0uM
Kobalt Multi- Wrench (NOTE - New Pack does not bring small Sockets 9/32)
I recommend getting the socket wrench set if you need a 9/32
amzn.to/3bgmevV
THANK YOU TIPS: tiptopjar.com/...
#repairsunvisor
#nissansunvisorreplacement
#howtoreplacesunvisor
Small videos like this are unspoken heroes of forgotten things. Thanks!
Thank you for you kind words and support!
This was so helpful! The best video that actually explained how to get this off! Thank you!
We are happy to help! Thank you!
7mm socket worked for me!
Thanks for the video!
Thanks we are glad it helped!!!
This is the video am looking for. I will try and update here how it goes. Than you so much
Good luck!
I did this and was very helpful. Leaving a comment to tell you thank you so much for going over this clearly and precisely!
It works! Thank you so much again! 👏🙏
Thank you. You really explained every step very detailed.
I’m glad it helped!
Thanks. The 2 screw drivers worked great.
Excellent video….got me excited about replacing my 2012 Maxima passenger visor. Except…
I’ve been searching desperately for a replacement visor & only finding dirty, used ones for $70+ or nice, driver side visors. Any suggestions on where to look? Feel like I’ve searched so many online parts websites. I’m ready to just duct tape it up out of the way and be done with it. Grrr.
Did you try any of the Amazon links that I have in the description.?
That’s where I got mine.
You can also try rockauto.com? That’s my go to if I can’t find a decent price in Amazon.
Keep me posted !!
I got my little cover off by watching this video! Hardest part of this job! I used a 3/32 socket to get the screws out. Another tip-after I plugged in the new connection, the new visor slipped from me while screwing it back and broke the connecting wire! After some serious cussing (trying to install a visor with no "flip" action), I had to buy another visor, since that tiny wire cannot be fixed...and having a LIGHTED MIRROR is a requirement for this lady driver! Also, the aftermarket visor seemed frozen from flipping up & down...so I pulled the top bar out 4 inches and put a coat of vaseline on it. It finally flipped easy!
You are awesome!!! Thank you for sharing your tricks and tips!!👍
Dawn where did you get your 3/32 socket? I've been to Ace, Harbor Freight, Home Depot and Auto Zone-- no luck!
@@RN4u2 Oops- it's a 9/32 socket, I had in my rollaway in my garage...
Awesome instructions!
Some real info here! Any other video i watch talks about using a "screw driver". LOL THIS IS IT! Thank you! #REALTALKNISSAN #SUNVISOR #FIXYOURCAR
Thanks man! I broke that small cover with the 3 clips lol but can barely tell but do you know where I can get replacments?
One of the screws on my visor is stripped and won't come out...and recommendations?
Just had to replace mine. Used a plastic bike tire lever to get the plastic cap off
Very informative and entertaining. Thanks for your efforts sir!
Thank you! I’m glad we were able to help.
Very helpful video
Thank you! I’m glad we’re able to help!
Super helpful, thanks
Should I get a after market or original Sun visor? Have to replace both on 2016 nissan altima no light on mine.
The one in this video is an after market. The color match.
I ordered the tool to help get it off as well as the visor and the visor came first so I went at it with a flathead till it came (pro tip: popped off in under a minute when you go at the corners closet to the seam). Now I just wasted money on a tool I don’t need anymore lol
Thank you!
Glad we were able to help!
I'm trying desperately to get the little 3/32 socket and cannot find it...
Where did you get the little tool?
I’m sorry you are having a hard time. I added a link to the description where you can find similar tool. Make sure it has that measurement. You might have to buy a small set from an auto part store.
It’s 7mm not 3/32
@@man-e-beards7148absolutely right! Thank you!
Do you know if that visor fits a 2016 Rogue? Thanks
😅thanks from oman. I have altima 2016. Same problem
I’m glad it helped!
Thank you very much for your video however
Super helpful, but my visors are $100+ each. I'm using a bungee cord right now. Trying to find another easy hack because I can spend that money on something more important.
Thanks guys
We are glad we enable to help!
So I have to detonate a bomb for a simple visor?
Lol!!!
If you don’t mind sharing. Where do I buy these sun visors? The ones at the dealership here are $260 each, so we both know that’s not happening lol 🤣
🫡 Amazon. I have a link in the description.
Thank you so much.
But why does the visor snap like that in the corner cause mine is broken there too
It’s an engineering flaw. They picked a plastic that was not as strong it needed t be.
This is a great video, I just mad you’re breathing so hard get that checked out.
Thank you!
We are happy to help!
Just FYI- it’s a 7mm not 3/32.
9/32 not 3/32
Thanks for the correction!
9/32 people don get confused because he said 3/32.
Never heard people so out of breath just sitting in a car.
Is what happens when you put the 🎤 too close to your mouth. 😂
Lol i fricken love old school white ppl 😂
Lol the puls
Got to have fun!
Pretty sure it's not 3/32" bolts.
Correct! My partner corrected me the video lol!!!
Nissan has to make the worst visors in the market. I’ve gone through two visors already on my 13 pathfinder.
Agree!!!
1,000% agree 😂
Y y’all breathing 😮💨 so hard that’s so distracting
It sure is. I did not know I had the mike so close.
Bro the clip just wont fckng come out
I had the same problem for the driver side.
Here’s how I did it with a special tool.
m.th-cam.com/video/kFEmzp4BpbQ/w-d-xo.html
Thank you 🙏🏽