Im 15 and when I get older I am going to UTI (Universal Technical Institute) I want to be an mechanic and maybe transfer into F1 or FD this helped me a lot just sitting here thanks for helping me understand how to remove and install an exhaust system THANK YOU :D!
Look for a city college that has an automotive training program, you get more credibility that way.My 2 year program runs about $8-9000 total where UTI you end up being in debt of over $25-30,000.
For F1... if you were to go to a school I would say MIT studying mechanical engineering and graduate with a 4.0 GPA. Then you might get one. For Motorsports in general look around for local race teams and you'll just have to start from the ground up. Get to know people and even just volunteer to work, that's how you'll get in. Good luck!
Very detailed well classy explanation among the two. I've been a Spoon Sports fan ever since I owned my 1st Honda car back in 2004. It was a '97 civic sedan EK. 6 years later I migrated here in US specifically in South Orange County in which I'm starting to build my 2006 DC5. Too bad the Spoon Street Axle Back Mufflers have been discontinued but still a due hard Spoon Guy. Thanks DC5 owner in Aliso Viejo, CA
I've had my AP2 S2000 for almost 2 years and loving every second of it. I self-installed the Invidia Q300 dual tip exhaust earlier this year, but DAMN would it have been helpful if I had this video to guide me through it. The 10 year old bolts on the stock exhaust did not want to come out at all. Broke one and had to drill through it. Took ages. Would love some Spoon swag!
Always wear eye protection when working on (or under) cars. I can't count the number of times random pieces of gunk or even bolts have hit me right in the glasses.
lilazna55a5inz you obv never worked under a old rusted car, where the exhaust is just a bunch of rust. hit it 1 time with a airtool and the rust flyes into your eye.
good video. looking forward to seeing the roll bar install as i have been considering that for my car and would love to see what is involved with a self install
Great DIY video for removing the stock exhaust and installing the Spoon N1 single! Would love to see more videos :) Any plans on covering the left hole up?
I know this vid has been around for a while. Just now looking at doing an install for my S. After 8 years of ownership and a brand new engine we finally clicked over 100k miles, and I think it’s time to do some tinkering. Without the cat this install doesn’t throw a CEL does it?
Where can I purchase a spoon exhaust for a Honda Fit 2015 and for that matter which exhaust you recommend? Also where is city or industry CA? I am in north CA I will need a tain suspension install
This is the video i used to help me install my single exit. This is the best video, the other ones arent as good. The only other one that comes second to this is the one by mightycarmods
exhaust sound flow is depended on the flow of engine gas through the headers as well as how open back pressure u have within the exhaust system....cool looking exhaust chrome doesn't mean more power....
All I'm saying is if I changed that, I'd go for a twin exhaust... it looks MUCH better, sounds as good and the efficiency loses are very minor. well it will be couple of pounds heavier but I'll take that over an ugly gaping hole in the bumper. considering the fact that it'll still be much lighter compared to stock, I'm pretty sure it is the right way to go, unless you compete and couldn't give a rats ass about looks...
Ye I guess for some people its better. I'm a die hard function over form guy though so its really not for me. And I actually prefer the looks of a single over a twin even with the gap.
David Stewart i'm pretty sure they have covers for the old exhaust port. Plus dualies look better than singles :) UNLESSSSSSSSS, this is a track car then who cares lightweight is the way to go no matter what, as long as it's safe.
Even if pushing that forward increased performance, I would still rather go with a dual exhaust purely for its higher efficiency which would result in better overall performance. I personally like the Invidia one. Lol Nvidia thumbs up if you get it
I like this dude, something about the whole laid back vibe makes the install nice to watch
I have came to his shop many times before!!! He does all my car alignments, In person he’s the same way, very layback and chill guy.
Good to see Karla still in the S2k scene. Use to see her at meets frequently with other S2k owners.
Although I do prefer the look of a dual exhaust.. it's hard to argue with the weight savings and sound of this spoon sports exhaust. Great video!
So proud of you Karla!
Yay Spoon. Liked the install vid... pretty relaxed vibe to it and not awkward at all.
Im 15 and when I get older I am going to UTI (Universal Technical Institute) I want to be an mechanic and maybe transfer into F1 or FD this helped me a lot just sitting here thanks for helping me understand how to remove and install an exhaust system THANK YOU :D!
Do not waste your time and money at UTI. There are better ways to achieve your goals. And they wont cost you $28k for tution.
If you are aiming for F1 or FD, you should be looking into an engineering school.
Look for a city college that has an automotive training program, you get more credibility that way.My 2 year program runs about $8-9000 total where UTI you end up being in debt of over $25-30,000.
zhiminzou90 UTI definitely won't be enough to get into Formula One.
For F1... if you were to go to a school I would say MIT studying mechanical engineering and graduate with a 4.0 GPA. Then you might get one. For Motorsports in general look around for local race teams and you'll just have to start from the ground up. Get to know people and even just volunteer to work, that's how you'll get in. Good luck!
Very detailed well classy explanation among the two. I've been a Spoon Sports fan ever since I owned my 1st Honda car back in 2004. It was a '97 civic sedan EK. 6 years later I migrated here in US specifically in South Orange County in which I'm starting to build my 2006 DC5. Too bad the Spoon Street Axle Back Mufflers have been discontinued but still a due hard Spoon Guy. Thanks
DC5 owner in Aliso Viejo, CA
They did a great job installing the Spoon N1exhaust. Looks and sounds great. I want to order one for my DB8😍
I've had my AP2 S2000 for almost 2 years and loving every second of it. I self-installed the Invidia Q300 dual tip exhaust earlier this year, but DAMN would it have been helpful if I had this video to guide me through it. The 10 year old bolts on the stock exhaust did not want to come out at all. Broke one and had to drill through it. Took ages.
Would love some Spoon swag!
I have this exhaust aswell. One of the best exhausts for the S2000.
I always like the muffler designs Spoon uses
2 good things I liked, light weight and the sporty sound.
Thanks for the video.
Always wear eye protection when working on (or under) cars. I can't count the number of times random pieces of gunk or even bolts have hit me right in the glasses.
Harden up bro even that chick in the video is tougher than you
lilazna55a5inz
you obv never worked under a old rusted car, where the exhaust is just a bunch of rust. hit it 1 time with a airtool and the rust flyes into your eye.
lilazna55a5inz you're so cool..
***** my eyes are rust resistant
Spoon, an s2000, and Karla... So much win GT channel!!
Awesome! would love to see more Technik vids with the s2k.
Looks and sounds good. What was the weight difference between the two systems?
good video. looking forward to seeing the roll bar install as i have been considering that for my car and would love to see what is involved with a self install
Very clean install love the way this thing sounds wish I can do this to my s2k keep on making these vids thumbs up!
yeah the installation is complete, but what about the MIL? did it come on or not?
So it would fit on Moog's Honda?
Spoon makes stock components better. 10,000rpm+ Hondas are one of my TH-cam favorites.
Great DIY video for removing the stock exhaust and installing the Spoon N1 single! Would love to see more videos :) Any plans on covering the left hole up?
I know this vid has been around for a while. Just now looking at doing an install for my S. After 8 years of ownership and a brand new engine we finally clicked over 100k miles, and I think it’s time to do some tinkering. Without the cat this install doesn’t throw a CEL does it?
Great video! I love Spoon and the S2000!
Good video!!!! I just don't like that the left side will not have a pipe! What about airflow 1 vs 2 pipes ! Is there any increase in horsepower
it would be awesome to win a spoon sports bag! You guys are one of my favorite auto channel.
Love these kind of videos, more installs please!
That's some hot muffler installation action right there. You can tell by the way this guy stumbles with his words heehee..
Thank you for this... Helps me learn how to put my exhaust on the s2000.
Love it!! Can't wait to get a S2k.
Looks simple enough...good video
Where can I purchase a spoon exhaust for a Honda Fit 2015 and for that matter which exhaust you recommend? Also where is city or industry CA? I am in north CA I will need a tain suspension install
man i love the s2k. right now ive got an ek but i hope to have an s2k some day and make it a nice track car :)
Nice! I'm looking for a good single exhaust for my S2000.
Glasses are a must when working underneath a car!
I wouldn't mind a Spoon Sports prize bag(; Merry Christmas!
Can someone please answer this question is it possible to put this exhaust and keep the cat ?
2) did you throw a code on the s2? Looks like it may have because there's no extender for the o2 sensor on the test pipe. Please comment on this.
We installed it with the test pipe for the video but put the stock cat back on afterwards.
+Mr Cabot Yes, and cats also help with torque production as well as low end power.
thinking logically, caring about your car's individual effect on the environment, pick one
Keep those s2000 vids going
Where can we see more of that e36?
Thanks for the sympathic video but... No cell fix ???
Thumbs up from me, really enjoy videos like this, nice work you two, cheers. 👍
Would of been nyce to hear on a test drive...
Great install! I wish there was something you could do about the other hole in the bumper. Spoon's s2000 rear diffuser would do the trick! :P
This is the video i used to help me install my single exit. This is the best video, the other ones arent as good. The only other one that comes second to this is the one by mightycarmods
Spoon Sports FTW!
Nice! It'd be awesome if you guys can do an exhaust clip sound!
Do you guys have any tips on passing smog with full exhausts ? would be helpful !!!
+Review Guy Put the stock Cat back in, pass smog, take it back out. That's really the only way with a test pipe.
Don't forget to put anti-seize on the cat bolts. It'll save you a lot of time, effort, and cussing/crying.
Nice vid. Sounds clean.
I'm thinking about getting a spoon n1 exhaust like this one is it CA legal ?
DJFish8051 it's not CA legal with the test pipe. I got a ticket for just having an aftermarket exhaust. It depends on the cop though.
Yeah it is still legal as long as you use you're stock CAT
exhaust sound flow is depended on the flow of engine gas through the headers as well as how open back pressure u have within the exhaust system....cool looking exhaust chrome doesn't mean more power....
i want those shirts!!! :D happy holidays!
great vid guys!!
Nice simple install video (Y)
doesn't look too good, especially with that big hole on the left side of the bumper. twin exhausts are worth the extra weight imo...
Really? You would rather your car sounded and performed worse just because there is a small space where the old one was?
All I'm saying is if I changed that, I'd go for a twin exhaust... it looks MUCH better, sounds as good and the efficiency loses are very minor. well it will be couple of pounds heavier but I'll take that over an ugly gaping hole in the bumper. considering the fact that it'll still be much lighter compared to stock, I'm pretty sure it is the right way to go, unless you compete and couldn't give a rats ass about looks...
Ye I guess for some people its better. I'm a die hard function over form guy though so its really not for me. And I actually prefer the looks of a single over a twin even with the gap.
David Stewart i'm pretty sure they have covers for the old exhaust port. Plus dualies look better than singles :)
UNLESSSSSSSSS, this is a track car then who cares lightweight is the way to go no matter what, as long as it's safe.
David Stewart as Robert said you can buy a cover for it
Very helpful! Thanks!
Are you guys outta oregon?
Some useful tips! cheers!
She's awesome, we need more woman mechanic. Respect! Good job
Awesome video.
Nice video!
Sounds sweet but the pipe does not extend out far enough to clear the bumper
Great video thanks :D
Would have been good to see a before and after dyno run.
pretty nice kit, but obviously for the ap1 rear bumper!
where can i find her
Not a fan because it's only a single outlet, but it sounds good. Spoon products are great. Spoon EG6
3) I can't wait for the next s2 technic vid (roll bar install it seems)
I get it . weight reduction bro.
but changing from a dual to single 🤐🤐
Imo this is the perfect stealth exhaust for the S2000 but in my opinion if I spent my money on a Spoon exhaust I would want it to be mean looking.
its tighten. not titan. 8I
Very informational.
Does Dominic Toretto know this is happening.
nice. sounds good
Just ordered one...now is the waiting game. -__-
S2k love!!!!
Miss my s2000.
Now install full spoon bodykit with spoon cr93
No eye protection? Spraying WD40 in small crevices usually bounces back!!!!
Do a video of Karla s2000 please and let her be in more videos
Yeah her s2k was purpose built, it would be great to see her thrash it round the track.
Put the stock on again. Thx.
Sharing this with my group thanks for the video for tgose who love doing it on their own :-) aka grease monkeys :-P
Even if pushing that forward increased performance, I would still rather go with a dual exhaust purely for its higher efficiency which would result in better overall performance. I personally like the Invidia one. Lol Nvidia thumbs up if you get it
I prefer the MUGEN Header/High Flow CAT/MUGEN Exhaust combination.
I love me some SPOOOOOOOOOON!
Well, being the only comment I must have a chance of winning :L
And not gonna lie, that looks horrible. Never change a duel exhaust to a single.
I would like to win a spoon sports bag.
Fork prize bag, please.
Nice Chill Aura about the Vid. also she is a cutie, I hope we see more of her ;D
Yo introduce your girl at the beginning of the video it's 2016
You forgot to use exhaust paste for better seal
Safety glasses Bro!
Sweet
Caution the spoon exhaust is crazy loud, the drone with the top up was unbearable.
Well Im sure that people who will buy Spoon Sports Exhaust don't care about how loud it is :)
I would like to win. Sounds good but looks strange.
And now you have a check engine light on.
It's gonna burn your bumper because it doesn't stick out far enough. My bumper is burnt as hell cause of that exhaust. I hate it
Trevor G right, thats what I was thinking about
Wow, she is pretty ;)
There's only 2 places a screwdriver can go in a screw or in your eye 😊