What can I say, whenever you come back to this channel, you're amazed by the attention to detail and fantastic narrative. Thanx so much for sharing these videos 😃
Dear all, you might notice a slightly more smoky voice this time. Unfortunately neither cigars, nor whiskey, nor any outstanding performances of the Mannschaft are responsible for that, but the stupid virus which I caught right in the editing process of this film.
There was a book that was turned into a movie about a women that made a Julia Child recipe everyday. I have no idea if either are any good. The reason I bring it up is, someone could use you videos as a reference and try to recreate each one. It would be called becoming Greasy. Even if the movie was not very good at least the world would have a couple more classic cars. Love the music. Thanks for taking the time to inform, entertain and not invade an innocent country :)
I view many car restoration channels many being classic mini ones as that is a car that I am restoring. However some are spoilt by unrelated waffling poor camera work and 90% of content shown on time lapse. I've only just discovered this channel and what a difference, so professional excellent close up camera work with detail commentary, that Alfa is going to be awesome! thanks very much, Rod from the UK.
Thanks, another great video. It brought back many memories of doing the equivalent job on my coupe. So much time can go into very small fiddly parts that nobody will see!
Simply amazing videos. Great detail, super lighting, music that adds, not detracts from the learning experience. You are REALLY good at this. And to think, I subscribed years ago because of your expertise in electroplating. We owe you a great deal
Such tenacity! I'm not sure I would have what it takes to do this work. It looks like enough to make a person mental. On the other hand, it seems as if at times it might be quite therapeutic. Maybe not.
Came here to get motivated to work on my GTV, left with an aching belly from laughing so hard at the psychosis/small countries comment. As always, great work and thanks for these videos!
Trim the little balls off the end of the welding wire, allows the arc to strike a bit better on those initial welds on thin panels. Awesome work thank you.
Yes, I know and I’m trying to. Sometime, however, the desire to set the next welding spot is just too big to wait another 10 seconds that it would take to cut it off. Thanks!
I pick up useful tips on every video of yours I watch. It's really great seeing someone do a job properly and not rush it. Out of interest what fluid tip size do you use for your mini spray gun? I have always just used a full size one, but it does put out a lot of paint so masking and cleanup takes ages. Keep up the good work
Hi, its great to see the repairs you have done to your Guila as there isn't too many videos, I have one as well, needless to say with "some" rust in the same spots so I was wondering a few things for evident future repair. For instance if this was the only project you were focused on how long would it have taken and roughly how much a repair like this would cost. Also you mentioned that there was some accident damage in the front so I was wondering how hard it is to repair them on these 105 series cars since just the sills have a complex design. Love to watch the craftsmanship and really appreciate this video resource!
Glad you’re here, mate. I guess a normally rotten Giulia sill would take me about 50h per side today, if I apply my high standards of rust protection. Floor pans about the same. The front doors are rather harmless, but the rear ones are very complex to repair. If I bought another one today, I’d above all else made sure the rear doors are okay. The accident isn’t much of a problem to repair, the only issue is a lack of space, so I need to remove the engine first. All the best for your project!
Hi Greasy finger, may I suggest you to look at this video from TH-cam. It''s about dry icing cleaning. You will without doubt love how this guy cleans this Porsche, amazing. Just a thought for you. I look forward seeing your next video... Have a good one, François (I AM Detailing : (Porsche 911 ”R” Dry Ice Cleaning & first Detailing in NEW SHOP).
In fact I did. In your huge brain there must be a deserted room for some basic German, I suppose? In that case I could recommend you the channel of a guy who uses glue …
@@GreasyFingers Don't know about that huge brain but I'm Dutch... we all understand German or at least we think we do. A link would be awesome.Couldn't really find a decisive answer whether or not to use it on structural elements.
@@remcotissink Here you go, Remco: th-cam.com/video/Jaxh47M-NLM/w-d-xo.html Likely not the answer to your question, but maybe it makes you a little wiser. My two cents: strength is far better than a mediocre weld.
@@GreasyFingers Thanx ! The guy has many small interesting projects. So why didn't you use glue ? It could have saved you time on your rocker panels I think.
@@remcotissink couple of reasons: I want to stick to one technology within one project. The AR sill panels don’t fit very well, you have to wrestle them in spot by spot. Finally, I need to gather experience with glues first. My plan is to use & test glue for the GT aluminium door skin project that I’m planning.
I really love this comment, thanks, François. It took me a while to recover from my Covid-disease, but eventually it appears all is fine now. I have also relocated my workshop to a bigger and more friendly place, so I guess I’ll have to ask you for patience for at least another four weeks.
@@GreasyFingers I'm sorry to hear that ! But happy to hear you are well now. And indeed relocating is a pain, but I trust you're going to make a great place out of it. Take your time, don't burn your most needed energy, ok ? Stay safe. François
@@GreasyFingers well I hope that if you do, you have the energy to complete it and the time to film it. You only have a number of cars "in you", I have reached my limit, the last is a great struggle to complete. Good luck
Well, please accept the historic complement, from a jewelry maker... She is being done, the way she is meant to be!!! Chears, although I have high fever too...
What can I say, whenever you come back to this channel, you're amazed by the attention to detail and fantastic narrative.
Thanx so much for sharing these videos 😃
Thanks, mate. That’s very encouraging!
Dear all, you might notice a slightly more smoky voice this time. Unfortunately neither cigars, nor whiskey, nor any outstanding performances of the Mannschaft are responsible for that, but the stupid virus which I caught right in the editing process of this film.
Gute Besserung! Hope its already over for you. I'm still "into" it.
Fell better soon and thanks for not have any bad psychosis.
Same to you. I’m doing good, it’s about to go away.
Have I an idea for you: binge my films a second time!
Thanks, Steve! 😊
Best wishes, hope you recover quickly
There was a book that was turned into a movie about a women that made a Julia Child recipe everyday. I have no idea if either are any good.
The reason I bring it up is, someone could use you videos as a reference and try to recreate each one. It would be called becoming Greasy. Even if the movie was not very good at least the world would have a couple more classic cars.
Love the music.
Thanks for taking the time to inform, entertain and not invade an innocent country :)
Loving your comment. 😆😆
The music is great this time, isn’t it?
Man, this time I loved the synthwave background music too!
Great video, and your skills never cease to amaze me...
Yeah, I love it too.
Very cool Eighties vibes.
I view many car restoration channels many being classic mini ones as that is a car that I am restoring. However some are spoilt by unrelated waffling poor camera work and 90% of content shown on time lapse. I've only just discovered this channel and what a difference, so professional excellent close up camera work with detail commentary, that Alfa is going to be awesome! thanks very much, Rod from the UK.
Thanks very much, Rod.
That’s wonderful feedback, it makes my day.
Great choice of music!
Thanks, Melina.
Yes, I love that piece too.
WOW ! bei deinen videos kann man extrem viel lernen .... VIELEN DANK
Danke fürs Feedback, Marcel. Schön, wenn’s Dir gefällt!
Thanks, another great video. It brought back many memories of doing the equivalent job on my coupe. So much time can go into very small fiddly parts that nobody will see!
Thanks, Mark.
Yes, very true.
Alfa Romeo patented Rust,then sold it to Porsche.Love your content,keep it up!
Thanks, Brandon.
Yeah, rust was just a disease of those days.
And in the next episode: Greasy Fingers makes a four dimensional repair panel. Just amazing, get well soon!
😆😆
A four dimensional relativistic repair panel? And then a quantum mechanics panel which is there and not there at the same time?
Simply amazing videos. Great detail, super lighting, music that adds, not detracts from the learning experience. You are REALLY good at this. And to think, I subscribed years ago because of your expertise in electroplating. We owe you a great deal
Thank you, Steve.
I suppose you didn’t even know I’m into Alfa when you found me for the electroplating stuff?
Amazing attention to detail. Love watching all your episodes.
Thanks, Jeff.
Please continue to watch them!
very precise work like always on the part ho will not see.great job.excelent
Such tenacity! I'm not sure I would have what it takes to do this work. It looks like enough to make a person mental. On the other hand, it seems as if at times it might be quite therapeutic. Maybe not.
Thanks for commenting!
It’s actually exactly these two.
Great job-video-soundtrack!!!
Thanks, Pantelis.
This 80ies sound is so cool, isn’t it?
Came here to get motivated to work on my GTV, left with an aching belly from laughing so hard at the psychosis/small countries comment. As always, great work and thanks for these videos!
😆😆😆
Sehr gut gemach! Beste Grüssen aus Kanada!
Danke, Aziz!
Trim the little balls off the end of the welding wire, allows the arc to strike a bit better on those initial welds on thin panels. Awesome work thank you.
Yes, I know and I’m trying to. Sometime, however, the desire to set the next welding spot is just too big to wait another 10 seconds that it would take to cut it off.
Thanks!
WOW, another awesome Video. Thanks..
Glad you like it, mate.
Like first, then watch. Gute arbeit mein Freund!
Danke, Alfred! 😊
When you have a bigger gap,try using a filler rod,like one you would use when gas welding. Super work nonetheless
Thanks again, Duncan. I’ve used coat hangers before for that task, but I guess filler rod is sure the more suited kind of steel.
Loved the musicat addition to your productions. The restoration work is "riveting" as ever.😊👍
Thanks, mate!
Looking forward to the next video!
Yes, things are stuck a bit, but they’re coming!
Sir, your work is mesmerising and inspirational. Just wonderful craftsmanship. Thank you.
Thaaaaanks! 😊
Thanks again for this well made video. I am excited to see the final result.
So am I! 😊
I pick up useful tips on every video of yours I watch. It's really great seeing someone do a job properly and not rush it. Out of interest what fluid tip size do you use for your mini spray gun? I have always just used a full size one, but it does put out a lot of paint so masking and cleanup takes ages. Keep up the good work
Thanks for commenting!
My gun supports 0,8-1,2 nozzles, I use the 1 mm.
Great fabrication work, looks great 👍 👌
Thanks!
Hi, its great to see the repairs you have done to your Guila as there isn't too many videos, I have one as well, needless to say with "some" rust in the same spots so I was wondering a few things for evident future repair. For instance if this was the only project you were focused on how long would it have taken and roughly how much a repair like this would cost.
Also you mentioned that there was some accident damage in the front so I was wondering how hard it is to repair them on these 105 series cars since just the sills have a complex design.
Love to watch the craftsmanship and really appreciate this video resource!
Glad you’re here, mate.
I guess a normally rotten Giulia sill would take me about 50h per side today, if I apply my high standards of rust protection.
Floor pans about the same.
The front doors are rather harmless, but the rear ones are very complex to repair. If I bought another one today, I’d above all else made sure the rear doors are okay.
The accident isn’t much of a problem to repair, the only issue is a lack of space, so I need to remove the engine first.
All the best for your project!
@@GreasyFingers Thanks a lot for the insight. Looking forward to the next episode of the Giulia. Cheers!
“If you overcome your psychosis like this you don’t have to invade innocent countries” the commentary is 😘 👌 *chef’s kiss
😆😆
I like the videos👌nice car.and that red porsche looks amazing
Thanks, mate! Yeah, I love the Guards Red.
You can also use a metal coat hanger to add metal to your weld to fill in space.
Thanks for the tip.
And for obvious reasons it has to be Gucci or Prada. 🙂
Hi Greasy finger, may I suggest you to look at this video from TH-cam. It''s about dry icing cleaning. You will without doubt love how this guy cleans this Porsche, amazing. Just a thought for you. I look forward seeing your next video... Have a good one, François (I AM Detailing : (Porsche 911 ”R” Dry Ice Cleaning & first Detailing in NEW SHOP).
Thanks for the tip, François. This knocked me off my feet. It’s absolutely fantastic!
First thing I did after watching the film was googling prices.
Wie immer, faszinierend!
Besonders die Feinheiten in der Bearbeitung bei 13:13.
Guter Sound! Wer ist das?
Gruß und gute Besserung.
I was researching in an other issue when I started wondering if you ever considered using glue in stead of rosetta welds ?
In fact I did. In your huge brain there must be a deserted room for some basic German, I suppose? In that case I could recommend you the channel of a guy who uses glue …
@@GreasyFingers Don't know about that huge brain but I'm Dutch... we all understand German or at least we think we do. A link would be awesome.Couldn't really find a decisive answer whether or not to use it on structural elements.
@@remcotissink Here you go, Remco:
th-cam.com/video/Jaxh47M-NLM/w-d-xo.html
Likely not the answer to your question, but maybe it makes you a little wiser.
My two cents: strength is far better than a mediocre weld.
@@GreasyFingers Thanx ! The guy has many small interesting projects. So why didn't you use glue ? It could have saved you time on your rocker panels I think.
@@remcotissink couple of reasons:
I want to stick to one technology within one project. The AR sill panels don’t fit very well, you have to wrestle them in spot by spot. Finally, I need to gather experience with glues first.
My plan is to use & test glue for the GT aluminium door skin project that I’m planning.
Lovely stuff! What camera do you shoot with if you don't mind me asking?
Thanks, Joel.
That’s a Fuji X-T4.
Hey, Greasy fingers ! Where are you ? I miss your video's !
I really love this comment, thanks, François.
It took me a while to recover from my Covid-disease, but eventually it appears all is fine now. I have also relocated my workshop to a bigger and more friendly place, so I guess I’ll have to ask you for patience for at least another four weeks.
@@GreasyFingers I'm sorry to hear that ! But happy to hear you are well now. And indeed relocating is a pain, but I trust you're going to make a great place out of it. Take your time, don't burn your most needed energy, ok ? Stay safe. François
what sort of filler are you using there. Does it have metal fibres?
No.
What will you do with yourself once it is all finished?
Simple answer: build another one.
@@GreasyFingers well I hope that if you do, you have the energy to complete it and the time to film it. You only have a number of cars "in you", I have reached my limit, the last is a great struggle to complete. Good luck
@@paulwootton5378 Very wisely!
Any news about this beauty?
Hi Andreas. Actually no, too many other projects. My goal is to have her ready for the painter after winter.
very nice! hot tip - clean the metal before you make your part, makes life a lot easier.
I know that you’re right, but still I found it kind of cool to built the part from a rusty panel.
Well, please accept the historic complement, from a jewelry maker...
She is being done, the way she is meant to be!!!
Chears, although I have high fever too...
Thanks, mate, and get well soon.