Lawn Striping - DIY Striping Kit Build and Demonstration
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2017
- I've been thinking about adding a striping kit to my Toro Timemaster mower but before I spent a decent amount of cash on a premade version, I decided to try out a DIY build and see if I could make that work. I'm certainly open to any suggestions you might have to improve this build so leave a comment below.
DIY Striping Kit
3 Inch PVC Pipe: amzn.to/2rzxPgt
PVC End Cap: amzn.to/2sBtZ4P
Hex Bolt: amzn.to/2r3TYA8
Brackets: amzn.to/2sBH7al
Washers: amzn.to/2s2cy0i
Nuts: amzn.to/2sQLM7F
Rubber Spacers: amzn.to/2seqJz8
Clevis Pin: amzn.to/2sBUeYW
Cotter Pin: amzn.to/2sCbiOs
Drill I am using: amzn.to/2s2rzPQ
Work Bench: amzn.to/2sBNDNY
Reciprocating Saw: amzn.to/2rSRaK4
Learn something from this video and want to help support me directly?
Join Our Community - / ryanknorrlawncare
My Merch Store - bit.ly/2LRDPYF
Paypal - www.paypal.me/ryanknorr
My Podcast - bit.ly/2FOo5ak
Ryan Knorr Lawn Care is a participant in the Amazon Services LLC Associates Program and other affiliate programs below. An affiliate advertising program is designed to provide a means for sites and creators to earn advertising fees by advertising and linking to amazon.com or other product sites. I receive a small commission through these links.
~~Products and Equipment I use in my lawn can be found here www.amazon.com/shop/ryanknorrtv
~~Great Place to Purchase Lawn Products - shrsl.com/129zc
~~Swardman Reel Mower www.swardman.com - Use the Promo Code “ryanknorr”
~~Sprayer I use - Sprayers Plus 105Ex
www.sprayers-plus.com/product... - Get free shipping with code GOELECTRIC
~~Kujo Yard Shoes Promo Code - Save 10% on a pair of shoes www.kujoyardwear.com?promo=10ryanknorr
~~Notice my MN sports hats/sweatshirts? Grab your favorite team gear here - shrsl.com/19iqh
-Find me on Social Media-
/ ryanknorrlawncare
/ ryanknorr
www.youtube.comwww.you... (My Music, Vlogs, etc)
Want to learn how I became a lawn care youtuber? - • The Ryan Knorr Lawn Ca...
Learn how to renovate your lawn from start to finish - www.youtube.comwww.yo...
Main Camera Setup
Panasonic G7: amzn.to/2mNnkk2
Zoom Lens for G7: amzn.to/2ArrmsU
Prime Lens for G7: amzn.to/2jN2Ng2
GoPro - amzn.to/2RWUWk1
Video Tripod: amzn.to/2GQCcZM
Phantom 4 Pro Drone: amzn.to/2PBWMky
Macbook Pro: amzn.to/2otcHZp - แนวปฏิบัติและการใช้ชีวิต
You just made this so simple. I've been considering buying a kit since I bought my house but couldn't see spending that kind of money. Thank you. 2 years and your video is still being found 😉
Glad it was helpful!
I just made one for my cub cadet and it’s mind blowing how well it works, and only cost me 22$. I did hook a 3rd loop to run a rope lift while backing. I used knock out caps so there is no cap to have more pressure on grass than rest of pipe. Wish we could post pics
Would like to see yours to better understand that lift feature.
When I built my striping kit for my 22 inch Toro, I used 4 inch PVC, and I cut it so it was as wide as my wheels outside to outside. Instead of using PVC caps I used 4 inch Gripper Mechanical Plastic Test Plugs (model 33403D at Home Depot) so I have a completely even surface on the striper. They come with a bolt and wing nut in the center to tighten it into the pipe. I replaced the wing nuts with regular nuts, installed the mounting bracket and then lock nuts. Filled with sand the whole assembly weighs just under 18 pounds.
Thanks for the info!
Take a 4' chunk of leftover rebar, cut rebar to deck width to get 3 pcs, bind the 3pcs together with 3 zip ties and zip tie the bundle to the deck flap, works pretty good and only costs free.50
@@FylerTarlow only costs free 😂 I think this could work tho!
Hey Ryan just seen your DIY STRIPE Kit this was right on time for me. Every where I look Are sold out. Thank you for making this video!
You have literally made me a lawn nut. Why did I find you?!?! Keep up the great vids! Much appreciated :) Going to be making a DIY lawn roller similar to the handheld one you made.
It becomes a complete addiction so be prepared! :)
This looks great! Motivation for me to try a diy instead of purchasing one.
Just came across this, good job. Gonna try diy one myself and thinking of using a used treadmill roller. I used to repair them and think they would be perfect for this application
I use a solid axel from an old trailer cut down to the size of my mower drill 4 holes through the axel and the back flap and zip tie on
I built it with practically this system. To solve the back-up problem, I made a steel pipe above the roll, between the metal arms. In the middle of the pipe I attached a steel cable with a knop, and in the middle of my 'steer' i put a small hook. This way, I can lift my roll with 2 fingers (like the way you start the engine), and still hold on to your mower. Thanks for the vid!
Very good idea. Thanks for sharing.
Very cool idea! I'm going to try this. THANKS!
Just made a roller very similar to yours for my John Deere zero turn mower. It works great and was only like $55. Way cheaper solution than the Checkmate one which was over $350 for my lawn mower. Since the distance from the blade and the roller are farther apart on a zero turn rather than your push mower, I am able to back up.
Outstanding! Thanks
Good job, you can try with a semi hard yard brush attached to the back of the mower works really well 👍.
Very smart thinking Ryan. Great job!
Thank you!
Very welcome!
Great idea!
that reminds me I havent edited my setup yet. similar idea but uses L brackets which seems to give it more strength
I would love to see a detailed video on your setup.
Nice one Ryan, good luck!
I attempted building a PVC striper. An ongoing project that I also haven't been able to reverse with. Maybe someday I'll perfect it.
Yeah it was worth it to at least give it a try. I was hoping to gather even more ideas from those watching the video so that should help too.
Thank you for your ideas and video. I had already purchased the PVC and end caps. However, was not sure how to attach it to the mower. I had also considered the issue of backing up with my zero turn. Perhaps there is a way to raise the PVC pipe up when backing up?
Maybe add some para cord so you can lift it when backing up
Good idea. A cord of some kind seems like the best solution to the backing up issue.
Exactly what I was thinking. With another lever or something to engage it
Do you think a bungee cord on the ends would work?
Good Job!
If you can find stand up forklift rollers or power jack rollers used with out cuts and what not you can use those and they provide ample weight to mat down some good looking stripes
Attach a small rope to the side and secure it up by the push bar so you can lift the rope/Roller and maneuver then let the rope/Roller back down to continue.
I think the sollution is that you just make the arms longer so that the roller can't flip. I recently bought a timemaster, maybe i will also make a DIY striping kit!
Nice videos, keep up the good work, greets from Belgium!
Thanks for the idea. I will see what I can do!
I zip tied a heavy metal rod to the rear rubber flap of my push mower. It's heavier than rebar but not much thicker, allowing me to reverse. It goes under the mower deck and doesn't hit the blade.
The Toro Striper just makes it easy. Nice job on your diy one.
I wonder if the same concept would work on a riding mower ? Longer of course. Good build.
Try lowering the pin to the bottom of the mower just below where the bottom of the bag touches the mower. This worked for my timemaster. I can make a quick vid if you would like.
I would like to see that if you don't mind making a quick video!
Looks great! Thanks so much for the response video.
Joshua Jordan is correct. On my old toro, it happened that I had the holes closer to the bottom and that enables better leverage on the pull back of the mower.
Hey battle please make a video so I can see how you constructed yours. His video is great as well. I just like to see how ppl make their striper..thanks battle and stay blessed..
@@hillview7248 sorry. I don’t have that mower anymore.
My DIY striping kit goes the entire width of the wheel base so it eliminates the tire tracks. I have it filled to the max with sand similar to yours. I do mow a little higher so the blades can be better defined laying over which emphasizes the stripes.
Yep definitely a higher cut will leave better stripes.
I like the direction you took on this! I have wondered for years why the lawn mowing industry hasn’t satisfied this consumer demand.
I choose black PVC that was slightly more expensive, but helps to blend end with the rear of my mower. I also choose to use a fixed mount set up to ensure my back up feature is operational. This way no extra weight is added to the machines drivetrain. I had to buy a new mower this season and posted my install of you want to view.
I put a hook and string in middle so I can lift it if I need to back up
Almost like a cord lifting system, you could even accomplish this with thick string. You could run a string to both sides of the pvc pipe(the bolts on each end). You could start the string on your handles on each side and make a pull switch and latch it to your push bar for easy access.
Definitely a good idea. I will see what I can come up with.
thank you alot
No problem!
I know this is an old video, but they make inserts that got inside the PVC pipe so the PVC is level all the way across, without the thickness of the PVC end cap. It gives a little better performance for striping. I forget the exact name. For backing up, you could tie a small rope around the weighted PVC pipe to the handle and maybe give it a lift when backing up?
I started creating a kit like yours. I way overbought. In the end, wound up with two 5" and two 6" L brackets, 1" square bar cut to lenghth. 24" x 3" pvc with ends. Bolted it all together and filled with sand. 30 bucks and I have a nice striping kit. It's a hybrid of yours. And I can backup too.
Nice!
Hey George Gee, are there any pics of your setup posted anywhere on line?
I use a 25 pound bag’a beans.
It leaves no wheel or foot markings.
$12.99...Cheap stripes, great tasting beans!
Awesome work! I added a shop broom in front of the PVC to amplify the striping but yours looks perfect. Any starting issues with the new larger Briggs motor on the mower?
I had my pull cord lock up on me but the dealer took it apart and restrung and it has been fine since then. So other than that, no issues.
great job, and thank you
Thanks for watching!
ryanknorr thanx for bringing it!
Thanx a lot
Question do I make the PVC pipe the same length as the tires or the same length as the blades? You think it will work for a zero turn mower?
Do you have any issues with the metal bracket rubbing on the hex bolt? Wondering if you get that metal squeak or scream when it is rolling.
Can you add small anti scalping wheels from a riding mower to each end of the pvc pipe. That may help you go backwards with out lifting pipe up
That might be a possibility.
Hey Ryan for backing up I was thinking what if you attached a cord system to it to raise it almost like a pull switch so you could raise it temporarily for backing up. Just an idea, great vid man and keep the good work! Your lawn looks great btw, love that color!
that's a good idea.
josh thomas I did that on mine I made all I used was a peice of 3/4 filled with sand zip tied to rubber flap. and tied a strong wire around it and tied other end by pull cord. it works amazing. best part is was free
I was thinking of doing this as well but since mine rolls I didn't know how to accomplish it being attached to the pipe but also roll as it goes along?
Hey Ryan; did you ever figure out the “backing up” thing?
If you want the roller to be better at turning and backing up use two fixed points on the mower, so 4 brackets not 2, 2 where you have them than 2 more on the lower part of the mower
Buenos días 🙋♂️
Ryan,, a lo mejor no sepas español pero agradecería recibir ayuda.
Yo plante Grama San Agustín recientemente, mi inquietud es: para hacer lineas en el cesped primero tengo que podar la grama o ambas cosas a la vez?
O después de podar dibujo las lineas?
Just add a string or bungee cord to the striper roller to lift it up when you're backing up the lawn mower.
🎉🎉🎉
would you say more weight gives a thicker stripe.
Would chain work better than the brackets? Just curious, looking to make one of these this week hopefully.
I'm not sure on that. I feel like a more rigid structure like the bracket helps to keep it more in place.
When done mowing turn off the blade, drop down the deck all the way to the lowest setting and run it. Don’t know how push mowers work but it shows stripes with ride on mowers. IDK. just an idea. I’m ultra cheap 😂
I have that same mower so I would like to see how it works out because were looking into a stripper also.
So far it works but as I mentioned I would like to find a solution on backing up.
Joey St. George i dont think my wife would go for me pulling a "stripper" behind my mower! I'll stick to a "striper".
Hey Ryan, are you still using a striping kit like this? I just got a cheap used Honda on craigslist over the weekend and it has a plastic frame, I'm looking into doing something like this for a striping kit on the Honda mower I have now. I'm almost thinking about mounting low down on the handle bars instead of the deck frame. Do you use a striper on your honda?
I don't use one on my Honda but I use the Toro Striping Kit for the Timemaster from time to time.
I have the 30 stripe kit and backing up straight is very easy but backing up and turning it is a little more difficult. It still very manageable. What letter are u using when you cut?
Alex Schmitt interesting. I wish I could see one in action before I decide to buy for sure. I do a lot of y type turns and my grass is super thick so moving backwards is when things tend to get caught up.
ryanknorr I'll see if I can make a few videos for ya next time I cut and send to u! Shoot me your email at schmtz7@charter.net also what length u using on ur toro for this cut? Looks good!
Alex Schmitt awesome! I would appreciate it. send to theryanknorr@gmail.com and I'm cutting on C so should be 3.25"
Instead of backing up, trying two clockwise passes around and then finding your line down the middle to complete both sides. Voila! You’ll never need to back up
Hey, I'm in central California not too many vids in our area using lawn stripers. I'm upgrading my mower. What make & model do you use with your styper? Any updates on use, longevity or any other observations using this Stryper? Thanks so much bro in advance.
I'm using the Toro Timemaster. This still works fine but backing up with it was always a little challenge so I tend to just use the mower stock which still stripes really well.
Hey Ryan, great video. What are those plants on the side of your house called?
I believe we had strawberries there
i bought one for my 22 in. mower and it works awesome.
Are you able to back up with yours?
ryanknorr i got the toro striper kit. i can back up no problem at all.
Does this actually roll? Or drag along the grass?
I just run a bigleague behind my TM30. Sadly the engine mounting bolts sheared off so beaware. I'm now going to a 48 inch commercial mower for personal use.
That definitely doesn't sound good. I'll keep an eye on things and cross my fingers.
Put caps inside the pipe. That way its not leaving those little marks from the caps and all the pipe will be on grass.
Small wheels on the outside of stripping kit. (Backing up)
Have you considered the $169 Checkmate striping kit?
Actually I had one of those for my original timemaster and I didn't end up keeping it. I felt it took away from the maneuverability of the mower which to me is the point of having a push mower in the first place instead of a riding mower. With this design I wanted it to be easily removable so that I could use it when I want but also take it off to do the "trimming" part where I'm doing a lot of back and forth stuff. Good idea though!
Wow, your stripping kit came out very well and your lawn looks great. WTG, good job. I'm going to use the same materials that you did and build me one. I will go to Lowe's or Home Depot to pick up the materials which will be much cheaper then ordering them thru Amazon. Thanks for sharing.
Forget about striping - make a video about how your grass is so good!!!
I've got tons of them on my channel! Hope you take a look.
GO VIKINGS!!!
Skol!
Nice and a vikings fan
Does it have to roll? Or can it just push the grass down
It's just much easier if it rolls because of the friction
Ryan Knorr Lawn Care did you find a work-around for when you have to back up?
what # are you cutting on?????????
It would be pretty cool if you made these and sold them.
Your pretty crafty bro. Nice work. With that said i give you permission to spend the 94bucks plus shipping for the Toro Striping System. Its so easy.
Thanks! Unfortunately the 30 inch version is $200 so that's why I didn't pull the trigger on it but I still might...hmmm
Fill the striper with concrete
That would be an option but I wanted it to be heavy and yet still manageable pulling behind the mower without putting too much strain on it.
What mower is that
Toro Timemaster
Why not bagging?
I got the Toro striper kit on my timesmaster and the neighborhood loves my yard lol 😁
Awesome! Are you able to back up with the toro system?
Yes. but it's a method to it
Can you explain at all? I haven't seen any videos showing it backing up at all so I have been curious.
ryanknorr I have the toro time master striping kit as well. I haven't mastered the "3point" turn around method yet. It works more like a trailer with a single point of pivot. When backing up to line up your next run, the striper just jack knifes.
You could totally sell those
Hey Ryan, I built one on my channel if you want to check it out. Yours looks great!
Nice work! I checked out your video.
But you dont collect any grass whilst cutting.
Please don't chop my head open Syler
by the toro kid
PITTL
i think what i would do is run a metal rod through the pvc pipe with metal bearings to the pipe can spin so it will go with the mower and not be dragged
Good idea.
put a rope on your brackets so you can pull it up.
dude just tie yarn to the bottom and tie it to your handle bars, when u back up, just use your pinky to lift the yarn that lifts up your thingy.
A tiktok video led me here🤦♀️ I've been doing it wrong 😒
people, is there such a thing as too much (lawn) domination? :o) you're often told not to upscale your home too much above you're neighbors, in the same regards, if your lawn is already greener, thicker and healthier than your neighbors, do you ad insult to injury with some wicked striping??? Lol
You most certainly do. Lawn striping adds little extra time to cutting the grass.
hankydeee yep
Since you're not an engineer I'm 100% sure your idea will work... No that's not sarcasm nothing at engineer does works 😂😂