Hand cranked Emergency Generator
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2018
- Hand cranked Emergency Generator
Outdoor Multifunction Portable Manual Crank Generator for Emergency Survival USA: goo.gl/iXoYnV
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ www.amazon.com/shop/learnelec....
Please check out www.patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. You help is appriciated.
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
FAQ:
Me: Paul, 49 from USA
Education: United States Navy, University of California at San Diego B.S. E.E., University of Pittsburgh M.S. E.E.
Experience: United States Navy STS, Bayer Intnl Process Engineer, C.C.A.C AP of EE
Current: Retired
Health: BAD (Congestive Heart Failure)
Hobbies: Electronics, flying, amateur radio, music (classic rock)
Low cost, professional PCB's: www.pcbway.com - วิทยาศาสตร์และเทคโนโลยี
If we could put one on a street corner next to an elementary school with a “do not crank” sign on it.......
we probably wouldn’t need power plants any more.....
haha for sure!
Hahahahaha
True i probably would be there every day
I have this fantasy that cities could build human power generators where you walk up and push on a horizontal handle connected to a generator.
It would be a functional symbol for what people can do when they choose to co-operate like a new kind of electric church.
OH MY GOD I JUST LAUGHED MY ASS OFF 😂
You might want that longer handle once you put an actual load on the generator beecause more force will be needed in turning it to counter the back-EMF generated Also, since it requires one hand to turn the crank while the other hand holds the unit, it can be easily operated on the edge of a table or countertop.
The box: *a bunch of text in Chinese*
An American: Soooo, it has no information on the box whatsoever
Masters degree and you couldn't figure out that it is meant to be operated on the edge of a table?
Savage
Best reaction.
even i put anything at the end of a table and i have no degrees at all but ye anything that u have 2 move goes 2 the end of the table am gonna watch it now 2 se him do it lol
Just because you have a educacion doesn't mean you can't be stupid remember most part of educacion is regurgitation Most people today lack common sense
Don’t be rude. It’s because he needed to keep the demonstration in frame. It’s easier to do so without having to moving the whole camera set up
Be aware the USB port is not separate from the output connectors which means if you select any voltage, that will also show up on the USB port. Ensure you have the voltage set for 5V or you may destroy the USB devices you wish to change.
yea he says that..
Yikes! That is a very serious design flaw.😮
To be fair it's your fault if you kill your phone by charging it with 12V instead of switching the limit to 5V which is what they're meant to take
Hook it up to bicycle :)
How about putting a model p.m.r live steam boiler and steam engine on it from pmr research .com to get a one research live steam engines and minature gas engines it be cool to hook a steam engine to it pmr research .com can have a belt pulley custom made for your generator and it be continuous small compact off grid power generation system with a miniature live steam engine that be cool to run it about a 1000pm
OMG! Yes
How many watts per hour do you think I could get on 12v ?
Put it on an electric bicycle and have it constantly charging it lol
Nah I'm hooking it up to my penis.
Nice, I have been searching for a little hand crank generator (just not one of those plastic ones) for ages. Looking forward to your current tests.
Thanks David. This thing is quite well built, but the output is not quite smooth. You will see in the next video, but the ripple as around 400mV.
my first thought was to use it as a inexpensive windmill
Patrick Luke
Spend more money on weather proof that thing than the generator it self.
Same.. lol.. looks like a standard fan blade would mount up pretty easy.
You forgot to test the most important part, i.e. how it performs with a load attached. I'd like to see how long you can sustain turning the handle while loading someting with 20 Watts...
I love new scope days. Looking forward to seeing some current testing. I wonder if adding a current requirement will make that longer crank handle make sense?
That looks like a fun box to play with. I wonder how hard it would be to 3d print a gear set and box to make one of these things at home? Well at the library for me when I can get some printer time (when it is working 😒). Thanks for another great video Paul.
I would love to get one of these put an extended straight tube on it and put a water wheel on it
As you put more load on it, it should get much harder to spin, that is probably why they put the longer crank on it. Love your videos mate. :D
Thanks!
Is the gearbox using metal or plastic gears?
Plastic
It´s plastic, have two planetary gears
but wouldn't the torgue needed to spin the handle change with the power usage? so maybe it needs that big handle when you are using the max power this outputs?
Just baught this. Love it for emergencies!!! Everything I have is electric now.
Hello, just wondering how long does it take if you charge your phone?
thank you for making these videos
Wonder if you could rig this, or a few, to be craned by attaching to an exercise bike, or regular bike on a stand...
I'm surprised there are not any exercise bikes on the market that use a generator for resistance instead of magnetic or friction based resistance, at least not around here in Ireland (or UK). With a generator that could power a TV or recharge a laptop, I'm sure it would work well to encourage working out, even if the electric bill savings is negligible. Like this hand cranked generator, it would provide power during a power cut. Being pedal powered would also provide a lot more power, probably around 100 to 150 watts based on one TH-cam video showing a DIY pedal powered bike powering an old CRT TV along with a few incandescent light bulbs.
I have thought of doing something like that for my own use. Thanks for telling me I’m not totally full of
K tor makes one.. about 700$ and I think it's 80w
Thanks Paul.
Interesting piece of kit. Ideal for an emergency.
Be interesting to see how long it would take to charge a power bank or smart phone.
I was thinking this
Probly 9 years of cranking at 100 rpm. You see people pedaling bicycles Hella hard to keep one light bulb lit this thing I would assume is not that useful but I could be wrong
Thank you this video is really helpful..
Im impress i like and sub to you sir. You do the things i like to learn. Thank you
Nice color. Just paint some cool flames on the top, lol. That handle is long.
You might try a fire starter bow drill since there is no negative current going backwards. Like sawing a log, longer the bow easier to use. Try a oversized rubber grommet on crankshaft.
Cant wait for part 2. Just want to see you convert it to a mini wind turbine and powet all your 12 volt projects, thank you for sharing thi with us.
You should get one of those little mini steam engines and make a charger out of that. Exactly how much torque does it need to spin to charge something?
Just curious. On the unregulated side, do you get a negative voltage when you spin it counterclockwise?
Nope
Or even time traveling 🤣🤣🤣
At least when the nuclear winter arrives I'll be able to charge my phone, fantastic
I hope this storm isn't too bad. I'm in west NC. And I guess about Sunday it will be getting bad. I have seen that you may even get a little bit of it! Maybe even in to Connecticut. Mostly lots of rain. We are expecting up to 10" an hour I think they said. I have been making sure things are prepared insted of watching the news!
This very much interests me. I was looking at getting one of these for our winter power outages.
Very affordable lol
How much amps and watts it produce ? Does it support qualcomm quick charge? USB power meter canl help you.
What do you think is the biggest appliance you could get away with? Is it possible to give 240v? I know probably not but if it’s only good for usb definitely what else would we apply this to
You can turn to God Before it’s to late (God is the one and only living real God and everlasting God) get to know him and turn to him before it’s to late.
Nice! Mine is on the way, along with a 12V to 220 V /4000 W converter, a lead acid 12V battery, and a battery capacity tester! :)
Update: fucking shit does not work.
@@jerommeramirez1403 sad to hear that. I just plan to buy one.
@@jerommeramirez1403 what didnt work specifically?
@@kudzy11 the whole thing. You planning to make a whole energy system? I don’t recommend it in the end. Better to have a solar panel and solar lights when not sunny.
You don't have to worry about the voltage setting on the usb ports. That setting has nothing to do with the usb ports . it has a regulator that keeps it at 5 volts .
Can I crank it and store engery so that I can you it afterwards? Or do I have to keep cranking it on and on??
Once you stop It stops
you can charge up a powerbank which is a sort of battery
What about amperage?
that's like a small breaker bar! Looking forward to seeing it on your new scope (I was hoping you would show the scope output of this!)
Doesn't the torque increase as it's providing power?
******Maybe someone here can help me*****. I bought this for emergencies. I tested it out the box due to a coincidental power outtage when it arrived. I wanted to charge my phone. I set it to 5 as it says everywhere to do. I cranked for 30mins desperate to charge my phone and all it did was continue to lose power. The phone said it was charging but just kept dying. I've tried it on several devices since then and it's the same story and there's like no info online about this issue. Any ideas? Or ideas for a fix?? Side note. On devices with more than 50% power there is more resistance, but its not consistent!! Sometimes it slips like it's charging a dead battery then goes back to stiff again. Thank you for any potential advice!!!
Would a capacitor on the output help smooth the ripple?
I see it costs $35-42usd.
Probably would help.
What are the gears made up of? Plastic or metal?
The link in the description doesn't "work". Where could one get something like this that is durable?
Pretty interesting!!!
what size screw do you need?
Looks like a drum switch with an extra long handle.
I think you need to put a load on that sucker, before you go and shorten the handle up.
Make sure you put it on top of a cardboard box or a roll of toilet paper and never at the edge of a table. They void the warranty if you use your head even a little.
Why are they always limited to a crank to generate energy? what happened to the spring-loaded toys?
I got the same one I think thing works great for what I got it for you know it's not going to power or anything it's just too charge-up battery packs
Perchè si limitano sempre ad una manovella per generate energia? che fine hanno fatto i giocattoli che si caricavano a molla?
You are a good technician so I know that you understand this to be true . But if you can prove that there is any value in open circuit testing, I would love to see it.
Does it rotate both directions?
Much much cheaper if we buy that Motor + the gearbox and add Buck-Boost converter.
More reliable and ready for survival situation!
😃
Would this work if you attached a metal tube horizontal instead of the handle obviously put a screw through the light pole to attach it too the generator,then add a paddle and use water to turn the handle instead of human power
What ratio gear reduction? What amperage?
You can build one of these from a stepper motor salvaged from an old copier or laser printer, 6 diodes, a crank and a capacitor. Add a car usb charger to get 5V for your devices. ❤
I need to know current. Voltage is useless without a proper current. Thanks
Can it be used to charge batteries in a campsite, maybe put a windmill
I feel like you gotta crank this thing for 2 weeks straight to run your computer for like 30 seconds.
Nice item👍🏻
It's like a hand crank car alternator.
Very good 👍👍
3:22 what does he mean by having the switch in the right place?
If I wanted to charge a 5v phone does it mean I would need to set it up for 5v and no more?
Yup. That's exactly what that mean. If you set it to 6v or higher, you'd fry your phone, potentially damage or make the battery explode.
@@andychow5509 Thanks for answering. I don't know much about electronics so you potentially saved my a lot of $$$. Gonna get one from Wish.
How much that little machine generator sr where you buy. 😊
I have an older version of the K-Tor "Power Socket" hand-crank generator. It is U.S.-made and rugged, but it unfortunately illustrates the problem with hand generators. It's a lot of effort for a little result-1 amp USB output cranking like mad. The makers are right. Fifteen minutes of cranking will charge an iPhone well enough to make a quick call. But I did some calculations. Fully charging it would take almost an entire day of cranking. There's also a core problem with hand generators. You can't do much of anything else while hand-cranking. A bicycle-like generator is better. It leaves your hands free for other tasks and legs can generate more power than arms while getting less tired. The company that made my hand generator does make a sturdy pedal generator called the Power Box 50, but at $395 it is a bit costly.
Need to use a hex key its stronger and wont wobble wen u spin or turn hand crank and stem.....
Be nice to have an adjustable handle with finger gaurd.
Oh my God buddy it's obvious that goes on the edge of the table
Paul. Please check for Amperes. I need 1 ampere to charge the phone.
You will get more resistance from the handle when you charge a battery bank or use current.
Not very much
@@learnelectronics Have you actually tried it?! I bet you can only keep up turning the handle for about 15 minutes: then the lactic acid will have built up in your arm muscles such that you have to stop. One huge drawback is that this unit apparently has no internal battery to buffer the excess input power. Won't buy...
With a wind mill or water wheel attachment.... thus would have Hella more potential in emergency
Were could I purchase this item
Also putting it on the edge of the table would work
That’s a wind up
(insert laughing sounds here)
Thanks man !! 👊👺
Just remember, boys and girls, - 745 watts (0.745 kw) is the maximum power available from the input of 1 horsepower to a generator. The maximum power that a human can provide is well under 1 one horsepower. Keep this in mind when you consider and plan for your Emergency Survival.
Attach a battery powered drill to the crank end, feed power back into the battery from the generator, see how long it runs.
I did state you scope was missing a few days ago (The still shot of your work bench).
Not sure what's the point of that is
I was thinking the same
@@luongmaihunggia on the lines of perpetuation
@@dougjones4987 that's impossible
@@luongmaihunggia .oh ye of little faith
I think if you attach a load of more than a few mA the longer handle will make sense.....
Today's video...
This want do, it should be the kind that you don’t have to charge manually all the time, rather to work like old watches, loaded manually for some time, and it should retain the physical load give it bach over longer time to charge
simple solution, sit it on edge of table - crank has all the room in the world to spin over.
What can this be used for????
Would like to see it used on a dead car battery, since they claim if can do 12v
It seems like this can destroy devices.
I ordered one they said lost it..Walmart had it listed for $12 now $54..I think they realized underhanded me
Is it working to charge a smartphone? How long does it take to charge the phone let say from 0 to 10%?
Ff
Good
Can't wait u till tomorrow
I'm in NC and might need something like this if I was on grid. You never know I may need one anyway if they are no sun for a while. I have a 18 v drill I'm thinking about making ga 5v charger from it. Use a buck converter and use it to charge 18650 batts to power my phone charger. I can just put a handle in the Chuck. I have seen times I'd like to had one!
It would be better to have this thing driven by the legs. Getting even a small amount of power out of a hand-cranked generator would be exhausting.
Many companies manufacture this same type model with different names. The best one so far is the one made by HYDDNice. Is this one made by them or is it a knockoff?
I have to admit I have a new respect for generators. I spent about a hour at the gym peddeling. To generate power. And only generated enough power to light a low wattage bulb for 30 minutes. And I was peddling at supposeadly 20 mph! A grid tie inverter and a exercise bike with a generator great idea...charge ppl to come in to generate power for you! Awesome!!!
Hi Paul, do you think this is still worth it?
now lets see Paul Allen's hand cranked generator
ill buy 1 and diy it on my ebike to charge the battery and to get unlimited energy.
Were you able to charge your smartphone?
Is there a follow up video on this device ?
Not yet. But there will be in about a week.
@@learnelectronics Cheers for the quick reply
It's kinda DC booster
Aghhh, It hurts me to say it, but this review was kinda sloppy and in general, not very useful. Why there was no actual test with a load?? Can this thing keep the voltage stable, when you power something? Also, when you connect a load, the force needed to spin that motor, would be much greater and you will appreciate the long handle. :)
Cheers
You must have missed the part where I said we would do further testing tomorrow.
@@biff322 Definitely just to charge battery pack and then use that battery pack to power up various electronics (within reason ofc :) )
A load? This aren’t a big generator lol this is more for mobiles and smaller devices
VladiSSius I think if your going to camping this will help
It wasn’t a review OMG! He says he will do the proper testing in the future and this is more for portable charger not a freaking tv or fridge
Time for a water gravity generator.
Can you charge a car battery with this?
Unregulated hmmm maybe AC??? Also your link above to find this goes to error 404