Phantom Vision 2 plus (No Live feed)

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • It isn't new that the JBI Phantom Vision 2 plus often doesn't give live video to your phone or tablet. I also struggled with this problem, until I found this procedure that's works out for me.
    I also performed the "heatsink" procedure before I was trying this out!
    • DJI Phantom 2 Vision+ ...

ความคิดเห็น • 54

  • @InspectordeBilleteras12
    @InspectordeBilleteras12 5 ปีที่แล้ว +1

    Oh man, freaking genius. From Argentina i send you a very big THANKS!

  • @billdurham5545
    @billdurham5545 6 ปีที่แล้ว +3

    Did not work for me.....However my screen is NOT completly Black When I click to run my iphone DJI app there appears a Camera Lense type snap, the in middle of the screen is a small rotating (swirling) icon, like it's trying to connect, but this swirling icon never goes away. ??

    • @Brettyboy10
      @Brettyboy10 4 ปีที่แล้ว +1

      Bill Durham hi bill did you find a fix for this?

  • @bossman10011
    @bossman10011 7 ปีที่แล้ว +1

    Great, followed your instructions and it completely solved the problem for me, Thanks!

    • @FlyBy1964
      @FlyBy1964  7 ปีที่แล้ว

      Great :) Fly carefully :)

  • @flyboy6383
    @flyboy6383 4 ปีที่แล้ว +2

    Tried your method among many others throughout TH-cam, unfortunately none have worked for me yet. I open the vision app and get a black screen with a spinning white loading icon as if its trying to connect. One of these days I'll get it up and going. Still left a like for the effort :)

    • @loiklaik
      @loiklaik 2 ปีที่แล้ว

      Did you make it brother?
      I am looking for a solution too

  • @anwarmerchant8102
    @anwarmerchant8102 8 ปีที่แล้ว +3

    thank you so much for this tip i had same problem with my inspire 1 and worked

    • @FlyBy1964
      @FlyBy1964  8 ปีที่แล้ว

      That's good news :) Glad that I could help out!!!

    • @mieyangming6220
      @mieyangming6220 6 ปีที่แล้ว

      Anwar Merchant i have the same problem with my inspire 1. Cam is working and recording but no live feed. Do you have the same problem? Inspire doesnt have wifi extender.

  • @lucky_rhino423
    @lucky_rhino423 3 ปีที่แล้ว +1

    You are a lifesaver.....i was just about to buy a new wifi module. ....this works for me?. Wonder why?.

  • @cruisingdog
    @cruisingdog 6 ปีที่แล้ว +1

    Format your SC card! Wipe all that the previous app release put on it, because it conflicts.
    Once you re-format the SD card, the message of low video signal will still come up every time you power on, but it clears itself away in a few seconds.
    At least, this worked for me......

    • @EttoreBazan
      @EttoreBazan 5 ปีที่แล้ว

      Joe Berta format the SC CARD or u meant to say sd card wanna try what u said joe sorry to bother u

    • @bonganimbatha9755
      @bonganimbatha9755 3 ปีที่แล้ว

      Even after I format the SD card nothing happens. My drone records and takes pics but I can't get the feed on my fone it remains black. Please help

  • @titandigs
    @titandigs 7 ปีที่แล้ว +2

    Great video, thanks for posting it worked for me

  • @douglasallen534
    @douglasallen534 5 ปีที่แล้ว

    This worked for me as well. Thanks!

    • @FlyBy1964
      @FlyBy1964  5 ปีที่แล้ว

      Great.....Fly Safe :)

  • @goofynski
    @goofynski 2 ปีที่แล้ว

    I've tried everything. Unfortunately nothing works. Tried some Android versions. 4.1.1..... 4.5.? Absolutely no live picture. Everything binds, repeater is ok. camera ok, it stores pictures and videos.

  • @shomci
    @shomci 8 ปีที่แล้ว

    hey man, i followed your method and WORKED!!! i dont really understand yet what is the reason of it, but I am glad. thanks :)

    • @FlyBy1964
      @FlyBy1964  8 ปีที่แล้ว

      Enjoy Soma, it is still working for me!!! :)

    • @johnrolfe4888
      @johnrolfe4888 8 ปีที่แล้ว

      Didn't work for me. I was hoping it would, but no luck.

    • @FlyBy1964
      @FlyBy1964  8 ปีที่แล้ว +1

      Hi John, try again and take your time to do the steps. Did you also do the "heatsink" modification?

    • @Wilscuts
      @Wilscuts 7 ปีที่แล้ว

      John Rolfe what heat sink

    • @FlyBy1964
      @FlyBy1964  7 ปีที่แล้ว

      Following video will show you the full heatsink procedure!
      th-cam.com/video/hLTmzQV-lYo/w-d-xo.html

  • @ФилиппОчеретный
    @ФилиппОчеретный 6 ปีที่แล้ว

    Awesome! It works! Thanks!

    • @FlyBy1964
      @FlyBy1964  6 ปีที่แล้ว

      You're welcome :)

  • @f-allroundmechanic3789
    @f-allroundmechanic3789 7 ปีที่แล้ว

    Wouw!!! eindelijk ik ga het morgen ochtend direct testen. maakt het niet uit op welke scherpte van het beeld je hebt in gesteld? alleen de volgorde van de zender,drone extender aanzetten?
    heb net getest. helaas werkt het niet. zijn er nog andere dingen die ik eraan kan doen?

    • @FlyBy1964
      @FlyBy1964  7 ปีที่แล้ว

      Bij sommige werkt het inderdaad niet. Ik moet wel zeggen dat ik de heatsink modificatie heb uitgevoerd.
      th-cam.com/video/hLTmzQV-lYo/w-d-xo.html

    • @f-allroundmechanic3789
      @f-allroundmechanic3789 7 ปีที่แล้ว

      Bob Oosterbaan Oké en als ik die mod ook doe kan het zijn dat ik dan wel beeld Heb? Ik hoop niet dat me wifi module kapot is

  • @Wilscuts
    @Wilscuts 7 ปีที่แล้ว

    Worked for me thanks!!!

  • @DaveWalsh
    @DaveWalsh 5 ปีที่แล้ว

    Didn't work for me :(

  • @mfjtf
    @mfjtf 8 ปีที่แล้ว +2

    Nope does not work at all for me.

    • @okstuv
      @okstuv 5 ปีที่แล้ว +1

      This tutorial has a fix for blank video problems on P2VP. Good luck! sites.google.com/view/phantom-2-wifi-module-fix/home

  • @tejobro6335
    @tejobro6335 6 ปีที่แล้ว

    can you detailed step by step ?

  • @nandovelho1
    @nandovelho1 6 ปีที่แล้ว +1

    Valeu 👍 já inscrito, vou tentar aqui no meu

  • @brettfishing
    @brettfishing 4 ปีที่แล้ว

    did not work

  • @jos3362
    @jos3362 7 ปีที่แล้ว

    Bob, doet hij het nog steeds bij jou?

    • @FlyBy1964
      @FlyBy1964  7 ปีที่แล้ว

      Ja nog steeds!

    • @jos3362
      @jos3362 7 ปีที่แล้ว

      Oke ik ga jou procedure vanmiddag testen!

    • @jos3362
      @jos3362 7 ปีที่แล้ว

      Helaas niet voor mij, vreemd allemaal is gebeurd na updaten en gebruiken van de djivision app naar 1.0.61,
      wifi drone geeft 42 db, wifi zender 60db, ik kan alles zelfs fotos en films transporteren met wifi tussen drone en telefoon.
      Maar ik blijf een zwart scherm een zwart scherm houden, wat het is schiet mij maar lek. Ik heb alles terug gezet, app gedowngraded, firmware drone en camera opnieuw erop gezet, camera en wifi extender 2 x opnieuw gekoppeld. En jou procedure 10x gebrobeerd met verschillende tijden tussen aanzetten van drone en wifi extender/zender. Ik breng hem zaterdag weg.

  • @RandyWatson80
    @RandyWatson80 4 ปีที่แล้ว

    nope

  • @Moe395
    @Moe395 6 ปีที่แล้ว

    Bullshit... I've got two of these bastards and neither has video coming from the wifi card... software updates screwed them up... DJI is playing stupid about their equipment malfunctions for fear of fixing the damn things... $2500 is allot of money to throw away on something DJI won't address. I even replaced one wifi card to see if it would work... 5 minutes run time and that one's gone bye bye. Resist your temptation to by these models!

  • @DydyChannel
    @DydyChannel 5 ปีที่แล้ว

    indonesia

  • @The-Bambii
    @The-Bambii 4 ปีที่แล้ว

    Kann hier jemand deutsch sprechen