The 4 Rotor will have NO FUSES to Blow or RELAYS to Wire?!
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- T-Shirts: www.dahmracing...
Patreon for Build Videos: bit.ly/2koiw8G
Instagram: bit.ly/RobDahmIG
Subscribe to Rob Dahm: bit.ly/1OAN9yi
AWD 4 Rotor Video Series: bit.ly/2QiFduE
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 4 | 13 ต.ค. 67](http://i.ytimg.com/vi/h8N9tY46P-M/mqdefault.jpg)
Put a stock rx-7 headlight switch on it to be able to pop up the headlights, then you have one fully stock part :)
Better yet have one stock bolt from a rx7 and tell people to find the stock parts
I feel like he should remake the stalk out of billet aluminium though just for because reasons
Techinically the headlight would be the stock part so dont need the headlight switch
Let’s scrap the whole project and build a stock rx7 fd3s 2+2 from scratch let’s cut the motor in half :)
@@JB-sv5pr There's 4-rotor RX-7's with far more stock parts than what Rob is building. It's doable, but it depends on what you want to use it for. If it's only track days, then Rob's RX may make sense, but for more daily-driving stuff, you'll keep most of the changes 'under the hood', so to say.
Rob Dahm: *touches drill to aluminum*
Also Rob: "Good, now it's billet"
More money in AN fittings then some people’s build lol
TheSPOONFED#1 dude I want to know what he will do with all the extras 😂😂 he has so much
Ghost Pro giveaway would be sweet but most likely another build
He’s probably spent more on fittings than my car is worth 🤷♂️
How much do AN fittings cost?
@@JF-ns5zs for like a -10AN some are $20 or more each. He has much bigger fittings like -16AN which I could see being 50-100 a fitting
I already miss Jaret, never forget his heroism at area 51
PowellMoore wait what happened?
But Rob, what's the point if you don't have a fighter jet style start up procedure?
Right😂
He has a futuristic spacecraft start up sequence. Push one button and the computer does it.
Plot twist the engine stand IS the 4 rotor build
What do you mean?
@@derpsheep6524 its got wheels and a motor so techincally its avehicel lmao
He has said he's gonna have a running 4 rotor. Didn't say it was gonna be in car. I believe the engine stand getting to sema more than the car to be honest. He's gotta mount a whole new carbon fiber body cuz the one there is missing the front fender and I don't see him finishing it paint ot wrap in time for the show. Unless he's been hiding the new body and is storing it somewhere... I don't see him doing that though he'd be bragging about it and been working on mounting it.
@@wheeln24-79 he said he's going to run engine on the stand in full package with functioning transmission before putting it in the car to complete the chassis and bodywork.
@@wheeln24-79 he said before that he had two chances to get the body finished in carbon but it doesn't seem that he's gonna do much of anything to the body, the whole sema deadline was just for the running drivetrain
We need more than 15 minuets to be truly satisfied Rob!
Damogan g that’s what she said!
That's true man
Yeah, some of us don't finish early.
15 min would be amazing but like in his last video he’s doing everything him self Financial stuff video stuff build stuff fabricating stuff just be patient there a lot that goes into build a car specially how he’s doing it 100% in his mind just be satisfied with at least a video
@@christiankunzel9449 I know as was only messing with The Dahm
Your knowledge, that I’ve seen in so many videos of yours,across so many different concepts and parts that is going to make your car work just astounds me
Posted just in time for my lunch break
Daddy Dahm > lunch
If your not talking billet I don’t wanna talk.
Howdy Justice no it’s your
Johnathon Lolley no it’s you’re
Lumer it’s*
Lumer “if you are not talking billet" = "if you're not talking billet"
you are = you'are = you're
.... in your incorrect version:
"if your not talking billet" = "if you not talking billet" or "if yours not talking billet"
both of which don't work.
What have I done
That stand looks more like it's going to make a lot of "house power" lmao Cletus McFarland!
At least 25 house powers. Which is like 2500 Hrsprs.... (Donut media James Pump woot woot)
This build is so awesome, I've been waiting for this since your 4 rotor crank was "lost" in the mail!
Rob is going to know every inch of his car. Years of planning are coming together right here... he knows and has planned everything... it's really incredible.
I'm loving the daily content. Thank's for sacrificing your life for TH-cam.
Gonna fire this thing up with a Billet Battery!
Rob is the reason we cant buy AN fittings
Man i still miss Jared :( he was such a quality camera man and a true man of culture
If you missed him you might know what his name was. It certainly wasn't Jared.
byw - 😂 - busted!! Lol.
It’s Jaret you uncultured swine. Have some dahm respect.
Hi Rob. I recently built a similar setup using the SmartWire on Azn's Dung Beetle and it works great. You might want to consider a small fuse and relay block for your ignition (as you stated) but also for the injectors and the ECU itself. You can activate all the relays with one of the SmartWire outputs.
This is the coolest build I’ve ever seen. Thank you rob dahm for keeping me entertained me my pit of depression 🙂
strap it to the ground so it wont flip when the doritos start spinnin
This has me super nervous. Also....the four upright posts seem like they could use some bracing.
what kind of pistons are you gonna run?
I believe he said Mahle pistons on the 3 rotor and Wiseco on the 4 rotor. Manley rods on the 3 rotor and Eagle rods on the 4 rotor. Rob doesn't know it but the reason the 3 rotor doesn't work isn't actually grape juice, but the knock sensor read wrong and threw the camshaft position sensor off. Can't have it all with variable valve timing I guess.
@@jacobwebb8818 hopefully decent cams too
@@Mgiles1001 Didn't he say he will use the FreeValve system? Christian wanted to give it to him for free after all
@@FzudemB I think not, in the end, Rob didn't wanted to overcomplicate it with the FreeValves like with all these spark plugs and injectors. Im glad though that he finally got a decent timing belt, considering the ponnies he's gonna make. I presume he would rip his head of if the first thing after pumping the pedal to the metal was to hear how valves meet the pistons.
That motor is pure art. Thanks fow sharing the build process with the world!
I'm not even a rotary fan, but you're slowly making me consider one before long. I've always loved the body lines on the FD.
Keep your head up Rob. if things you want done the right way, it takes time. Been watching the build for a while. Cant wait to hear it running. But on your time doing it the right way 1st have fun
Build a standoff plate for the dashpak so it's at a slight 15 to 45 degree angle... Better for the cool setup your making
I cannot wait to hear this thing fire up! Definitely one of the pinnacle builds on TH-cam!
Have to say I've been waiting all day at work for my lunch to watch this. I get your videos at different times and with working 2 full time jobs with barely any sleep it's hard to find a moment. I work 10am to 6pm then drive home to eat and sleep by 7:30 to get up and get to work at my other at 10pm to 8am. That's 5 days a week of saving videos to watch and catch up on.
I'm so tired I just bored u with all that nonsense lol my bad.
Great episode! Really enjoy these build videos :) helps me to try tackling bigger builds and fixes in my garage!
Keep them coming! Love from sweden
When this engine starts your channel will blow up! Really looking forward!
Or his engine will blow up and his channel will die
Just kidding love you Daddy
We're so close to hearing this thing fire! Best of luck this weekend Rob. Love my new 4 rotor shirt btw!
Dude I love how u don't do the whole intro and outro bullshit. Keep it real rob! 😁
What a great project, i never had much interest in Rotary engines until i found your channel
I came here wanting to hate him for putting a rotary in a Corvette. But that plan sure backfired on me :-P
@@kirkc9643 Putting a rotary in the Corvette was brilliant and was a huge hit at LS Fest, Rob is a true innovator.
I almost didn’t watch this. I’m working on a Turbo ws6 drag car currently. You started explaining what the smart wire was and did and I had to stop because I was gunna spend money I didn’t need to,
I looked up the price and was like.... okie dokey I won’t be spending $2000+ on that (for awhile) when my factory harness will work to get the thing going for now.
Super dope. This is a pretty loke build. Really hope it’s everything you imagined.
I'm over here just itching to hear that thing start 😍😍😍
This series has become one of my fav to watch right now!
“If you wanna watch $60k shake and it’s not a high price escort” lmaooo
Absolutely no one:
Rob: let’s make lots of very uncomfortable sex references
Really liking the 4 rotor build
Hopefully it can have its first start soon
Rob about to make some really expensive grape juice..
For real though, Rob, this is beautiful, and you just keep adding more beautiful things to it! Can't wait to see this start! (Also wish I could see it in person at Sema)
Loving these 4 rotor vids
South Park!!!! This just made my day. You get all the likes.
Rob, you need to have circuit protection for all of those high amp circuits. A fuse blowing means something is fucked up and you'd rather fix the issue then replace your nice shiny module or run new wiring
alphawolffff don't tell him, its better TV.
I got a little too high, watched this, and realized my love for wiring.
Tomorrow is it boys. Tomorrow we see the 4 rotor start. Rob has been promising this to us for years now.
We have been patient.
We have been watching.
Tomorrow we celebrate a milestone.
Damn I've never been this early but I'm happy I am
The car could probably turn on for 20 seconds with that gas thank 😂
30 sec at max power he said
It's one thirsty girl
I really enjoy the new generation of PWM's but it really comes down to your needs and if you want a "solid state sequencer" that requires constant power (don't know if racepaks one has internal batteries)...great but still have limitations and not to mention you can't borrow parts to fix it.
Keep it up and like the engine stand, i am building my EFI/Carb one as we speak
Defo one of the best sema upcoming builds and that GTR bumper on the shelf 😍
OMG I LOVE this build!!!! Ur building my dream machine to the TIP of a needle 😍🥰😍😍😍
It’s prolly gonna torque the stand apart and smash on the floor 🤷♂️
Ahhhhhh mannn
Hopfully
As a self employed auto-electrical specialist, this makes me very happy!
8:37 A consistent dip and a consistent speed will make it look real nice. Aluminum runs pretty hot and fast and you don't need as much filler as you think you do, especially on thin stuff.
That wasn't aluminum; hopefully, you knew that and were just offering extra advice. I have found that moving too slow, with too little heat, makes it harder to get nice beads on either metal. Running hot and fast can help reduce heat input into the part. X2 on consistency.
I definitely think you should do something to isolate that oscillation. It can lead to the flutter effect and then have catastrophic failure. Like the Tacoma Narrows Bridge
I’m ready to see everything blow Saturday lol
Lmaoooo boguss
I was gonna say shorten the legs on the stand to lessen the movement of the engine but your storage solution is also a good idea!
Rob
Piss the aem dash off and get a racepak logger dash (they can log 42 channels of data) and send all that info over can bus to your smartwire (can control anything based on logic in your smart wire without wiring it all in to either directly the smart wire or a input module)
I have the setup on mine and it is outstanding
Ive worked on a car with a PDU (Power Distribution Unit) and it was very nice any problems and you can just plug in and sort it out
When are you going to build the interior on the AWD RX7?
After all the money gone! Jk, I'm just jelous.
Its a rx8 not a rx7. Idiot
@@gsfbffxpdhhdf7043 lol it's a rx-7
Gsfbffx Pdhhdf the irony
Your RX-7 going to be from 2057 by the time you're done with it With all the cool gadgets and products you're putting into your car.. keep up the hard work you're doing a great job👍👍
Ectoplasm! I freaking died with the south park cameo!
Right On ‼ You Rock‼ Fire Her Up‼
👍👏👏👏👏💪💪I will be 👀You.
🏎️⚡⚡⚡ jst too good!
I would literally be okay with a 20-30 minute video. Every time the show ends, I want more!!
Good to know even Rob still gets excited when a package arrives. Lol
Bob Dahm needs to make a cameo when this thing starts running.
John Best It’s a very tight V8, see how close the spark plugs are 😂
Im so excited for the first startup :)
ITS FRIDAY ROB! NO BRAP YET ROB!!!
Cant wait to hear it run.
Hey Rob I'm not a fan PDMs for the simple fact that if a circuit fails then the entire module has to be replaced unlike a relay or fuse that can be easily swapped out, some high load circuits will take that unit out just a matter of when still a sweet setup for a clean look
Start that beast Rob. We all want to hear it
I love the solid state electronics, this thing is gonna be state of the art!
I can't wait this 4 rotor project is gonna be done
Idk if anyone has asked this but, have you thought of a potential fire suppressant system in the car just incase?
Loving these daily uploads! Thanks homie!
sometimes in the middle of my day i wonder WHAT is Rob Dahm doing to the 4 rotor today ??
cant wait to watch the live stream of this shit starting up
Fuel Pump wire is to thin for this strong pumps! (2:09)
for many setups yes. IIRC two 16AWG wires with 20A each will equate to 11AWG/40A which could be inadequate. In these cases just use a single fuel pump output (freeing the other in the process) to trigger a dedicated relay or two.
Loved your southpark reference 😂😂😂 but forreal tho youre the reason i fell inlove with rotaries. Keep up the awesome content👍
YESSSSSSSSS , Solid State Power Distribution for the win!!!!!!
Love the intro, but if your able to bend the mounting plate a little under the dream team you would be able to mount the AEM dash comfortably on the plate without touching the transmission if it has enough room, it's not in the car so it's not in danger
You're missing out on the whole experience of feeling like you're starting a fighter jets with that PDM...but hey, you can just say it's a rocket start-up sequence. :D
God damn Rob this build is so clean
Dahhhmmmmnnn. Robbb! Working hard!!!!
It was the spooky ghost
is it ok to directly mount the engine to the stand or would you need some sort of rubber engine mounts to reduce the vibration....I feel like it's going to shake like crazy when you turn it on.
Step Brothers Research and Development: "last week we put liquid paper on a bee.. and it died.." lol just reminded me of it.
Looks like your trying to build the world's fastest shopping cart lol this thing is gonna be nuts
With the fuel pressure you're expecting here you really want to have an option to turn off your fuel pumps. You don't want to have fuel pumps running all the time whenever you ignition is turned on for whatever reason (tuning eg)
I wonder why you welded the legs to the SIDE of beams instead of on top of them?
Loving these daily videos. We need some timelapses!
yay daddy rob is back
Your going to have the fastest test stand in town !
Rob is smart as heck man like I saw all those cables and froze
You should put motor mounts on the stand or some kind of bushings so the vibration won’t be metal with metal.
Dahm where is the next vid!
Wait, teng gives you a toolbox full of the right tools, and you still use an adjustable spanner.
became a patron for the startup hype
Nobody:
Rob: probably volcano proof
When you gonna start the building process?
I like that the comments section is now bullying Rob about the obsession with billet aluminium machining and not about the lack of 4 rotor content 😂
Rob please build up more support on your engine stand. The torque from that motor is going to rip that thing apart and throw your engine on the ground. You've got vertical support for gravity but no cross bracing at all. Also hoping you ground the engine stand properly so you don't short your electronics