I’ve always wondered how people make counter sinks at home, I just jam the screw in until it starts making an indent, I learned the trick well setting up a skateboard and accidentally tightening the bolts too tight, lol.
I love it bro! just subbed I just started making decks, where can I get a decent mold like that where it has the holes and the pegs to make sure everything is lined up?
Yep either use a router to shape them out or a belt sander. If you don't have that use a dremel. Get you some tin snips to cut off the excess before shaping it down to save time. Use minwax for your clear laquer. Get a dremel 3000 and use dremel bits for countersinking.
@@SkyDecks FairPlay it looks so clean💯 do you make your own ramps? I want to but worried the quality will be bad because I haven’t made anything so bought some blackriver stuff and go to skull fingerboards for set ups/parts as it’s uk and cheap prices can be crazy😅but some stuff definitely worth it
Yeah I’ve made a few ramps but not that many. It is fun to make your own ramp cause you can kinda choose how it will end up but the quality is often better when you buy.
@@SkyDecks yeah I get you seen a lot of DIY / homemade stuff that’s insane you can get creative with it and have endless options with what to do and it’s a lot cheaper if you already got the tools unfortunately I got nothing atm
@@itzzsamb5270 yeah but you don’t need much. One saw, some glue and some wood is all you really need to make a ramp. It’s a bit harder to make a board tho
I sell some wooden fb decks for my friends for like 5,50€ cuz im from Finland. Then i got some pivot cup material and non slider packs😂. And i sell some foam tape
Yeah that’s not the ideal way to do it. But I had to work with what I got and maybe there’s a better solution but that was what I found worked the best. But I’ll try to figure out a better way for the next time. Thanks🙏
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
Bro that’s is my dream to make a wooden deck clean Like your’s
Just gotta believe in yourself and you could make one even better!
I’ve been saving up for an old school kit, this helped me learn how to make them, thx.
I’ve always wondered how people make counter sinks at home, I just jam the screw in until it starts making an indent, I learned the trick well setting up a skateboard and accidentally tightening the bolts too tight, lol.
Yeah you can use a bigger drill bit to make the counter sinks
Bro, wicked tip on the countersinking!
That’s sick
sick i like the plys you chose
Congrats on reaching 1k subs man! We did it!!!!
Thanks man🙏
Wow, now i can make mine myself at home! Thx bro!
Nice work 🔥🔥🔥
So sick man! Great content
Thanks🙏
Nice
Just a tip, you can use your Dremmel to shape your deck. I find it a lot easier. Just use the round sanding bit👍
Yeah I’ve tried that but I prefer doing it by hand. It’s also too cold to be doing it outside so I have to do it in my room.
@@SkyDecks oh ok. It’s really cold where I live as well. 🥶
Yeah but thanks for the advice
thanks you inspired me to make a video about how I make decks
I’m glad to hear that!
🔥🔥
So cool!!🔥🔥🔥
Bro You so good in fingerboard
Tip, use watercolour to stain wood decks, I got really clean paint jobs I will be uploading to my channel soon.
what did you coat the deck with ?
How do you do it, it is so clean🔥🔥🔥
Nice video,also I would like to know what do you use and which brand is the thing to make your decks shiny ✨.
Coool
👌🔥🔥
Sick vid bro just postet mine
Cool man! Hey we should collab on a board. You make the board and I'll put the art on it.
I love it bro! just subbed I just started making decks, where can I get a decent mold like that where it has the holes and the pegs to make sure everything is lined up?
I got my mold from createyourskate.com/
@@SkyDecks thanks bro!!
Yooo I made my 71st sale today xD
what bit did you use on the dremel for the counter sinks?
where do you buy your veneer?
That my question
What paint do you end up using? would like to switch from the can to something like that. Greetings and really cool video. More please!!💯🫳🛹❤️
Where do you get your would from
This will probably be your most viewed video
Also where can i buy one?
I’m actually not selling them. I used to but not anymore🤷♂️
@@SkyDecks oh that sucks. But still keep the good work!
How you dye the veneer all the way through though
What type of wood is that, because I make ramps and half pipes and fingerboard obstacles but that wood looks better.
I use normal veneer. I don’t remember where it’s from tho
@@SkyDecks ok thanks.
Hi where can I find the wood stuff
Should put some tape on the inside of your mold to protect it
Hey skydecks
What’s up
What’s that blue stuff you put on the deck
It’s lacquer. It is white but it kinda looks like blue on video.
@@SkyDecks were did you get it
What was the finish u used? I'm making fingerboards. Does it work with paper graphics?
That’s sick. Do you know how to put real skateboard style graphics on it, like printed on or whatever?
Yeah you can use printed paper but to get it the same as a skateboard you need to heat transfer
From where did u get the veneer?
hello how have you been lately
I’ve been great! Hope you’re doing good too!
@@SkyDecks just working on some photoshop for graphic design
That’s sick!
We’re do you get that wood.
I actually don’t remember where I got it from
But I believe you can get it on eBay and those kind of sites
Awesome dude I am starting to make my own fingerboards any tips
Yep either use a router to shape them out or a belt sander. If you don't have that use a dremel. Get you some tin snips to cut off the excess before shaping it down to save time. Use minwax for your clear laquer. Get a dremel 3000 and use dremel bits for countersinking.
What kind of clear coat is that?
Saw was super close to ur wrist. Stay safe bud
I dont have any veneers rn so I been making paper boards pressed with a glue stick 💀
What do you use to seal the board when ur done?
sick boards do u sell
Thanks! I actually don’t sell them. I used to but not anymore
Lol
What mold did you use?
I use a createyourskate.com
@@SkyDecks thx!
Np
How long do you need to wait? To take it out?
I usually wait about 24 hours
@@SkyDecks oof I wait like 10
How do you get the mold tho
You can get it at createyourskate.com
Thx
@@codethfn np
Hey, where can I buy this from u?
I’m actually not selling them anymore
where do you get your veneer
Where do you get your wood from
I actually don’t know. It was a while ago I bought it
@@SkyDecks ok thanks
This is sick where do I get one
Unfortunately I don’t sell them
Oh but where do you get your wood
How to buy the veneer?
I AM THE 1000 Sub
Hello I know this is a stupid question but if you were to sell that how much would it cost
I’ll probably not sell any but If I did it would probably cost around 30$ depending if it’s a splitply or not
@@SkyDecks ok thank you 😊
No problem
Where do u buy this e metal molds
Can I buy one off you?
I actually don’t sell any. But maybe in the future🤷♂️
👌
Where did you get your mold?
I got it from createyourskate.com
@@SkyDecks omg thanks dude I've been trying to find a good one like yours 😁
No problem
Where
Yo i have a question how do u make a deck?
Idk man
Är det rämmen eller?
yo, u got a website?
no I actually don't sell them anymore
@@SkyDecks how come
cause it takes a lot of time to make a deck so I don't make them that often
@@SkyDecks how much did u originally sell for
I used to sell them for 15$
Do you sell these? Or make them for fun? You should make your own website and make unique boards you’d kill it
I unfortunately don’t sell them. I have done it in the past but now I don’t really have the time for it. But maybe in the future
@@SkyDecks FairPlay it looks so clean💯 do you make your own ramps? I want to but worried the quality will be bad because I haven’t made anything so bought some blackriver stuff and go to skull fingerboards for set ups/parts as it’s uk and cheap prices can be crazy😅but some stuff definitely worth it
Yeah I’ve made a few ramps but not that many. It is fun to make your own ramp cause you can kinda choose how it will end up but the quality is often better when you buy.
@@SkyDecks yeah I get you seen a lot of DIY / homemade stuff that’s insane you can get creative with it and have endless options with what to do and it’s a lot cheaper if you already got the tools unfortunately I got nothing atm
@@itzzsamb5270 yeah but you don’t need much. One saw, some glue and some wood is all you really need to make a ramp. It’s a bit harder to make a board tho
Wanna collab not irl but u name it?
So i heard that u sould ur decks for 15$, am i right. DUDE. THAT DECK IS SICK!!👍👍
Thanks man! Yeah I used to sell them but that was a while ago
@@SkyDecks 👍👍👍👍👍
@@SkyDecks Damn👌👌
I sell some wooden fb decks for my friends for like 5,50€ cuz im from Finland. Then i got some pivot cup material and non slider packs😂. And i sell some foam tape
I actually using a pro mold like a 3d printed. I just need to improve abit more my sanding skills cuz just got a dremel what ill use for sanding
Hey bro are u greek?
Nope I’m Swedish
I'm telling you now bro you should NEVER EVER saw towards your hand. I'm sorry but that hack saw is not the ideal tool to use.
Yeah that’s not the ideal way to do it. But I had to work with what I got and maybe there’s a better solution but that was what I found worked the best. But I’ll try to figure out a better way for the next time. Thanks🙏
🔥🔥
🔥🔥🔥