I just put a 26 inch rim on a 2001 ultra classic with American suspension Bolton kit. For some reason at low speeds taking off and slowing down to go around corners, it gets a very bad wobble back-and-forth in the handlebars. Any ideas what could cause this? It has brand new tires and the bearings were checked.
Are the fork tubes supposed to make contact with the frame steering lock plate just below the top tree? Seems like something could be damaged if they hit too hard on full turn.
It adds rake to give full suspension travel without raising front. It also uses our short neck technology to reduce the amount raised. See our other videos
Great, very cool idea, but why is there no before and after shot? You're wanting to show off your product this would have been the way to go not with out of focus close ups that we don't know what we're looking for. But then with all the unanswered questions I see here maybe your patient pending thing didn't work out for you? It's a great idea, I really like it but I would have marketed it better. I remember learning of this several years ago but now it's just slipped by everyone's attention. Good luck, I do love it 👍🇦🇺
Jasper Aguila hell ya man thanks alot. Just purchased shotgun air ride over the weekend man so hopefully they will hurry up so I can have it ready for the weekend cause I ride to much to be tore down. Thanks brother ride safe
Greetings according to the schedule, please send me your email (real email) so I can order my American air suspension kit for front and rear. Thank you very much for your video, thank you very much!
@@suicidecj5 I watch video a 2nd time and agree; it looks well made. It stretches the forks so it would take some time getting used to new geometry of bike. Have you tired slow speed riding techniques on this part? i.e. U-turns, cones etc.?
![EZ ON Rake Kit [EK14-26: 2014 and up, 26 inch wheel] Installation](http://i.ytimg.com/vi/XOHyHVJZ5mg/mqdefault.jpg)
![EZ ON Rake Kit [EK14-26: 2014 and up, 26 inch wheel] Installation](/img/tr.png)
Can I use my triple trees from my 23" set up with this bolt on neck to go 26" ?
I just put a 26 inch rim on a 2001 ultra classic with American suspension Bolton kit. For some reason at low speeds taking off and slowing down to go around corners, it gets a very bad wobble back-and-forth in the handlebars. Any ideas what could cause this? It has brand new tires and the bearings were checked.
Are the fork tubes supposed to make contact with the frame steering lock plate just below the top tree? Seems like something could be damaged if they hit too hard on full turn.
Why the washer goes on top of the fork tube spacer not the bottom as it comes from factory?
going over a speed bump slow....something CLUNKS arround the neck. do I need diffrent BUSHINGS?or is something not Tight?
Is this available for an Indian chief and Indian scout?
Someone needs to learn how to grease bearings ,better then the way shown in video . Other then that looks like a nice kit .
Where does the rubber o-rings in this kit go question mark
On the fork extension
What angle is that for the 26 inch wheel?
Do you make one for a 2011 Victory cross country
Can this kit work on a 2007 Yamaha roadstar
How do you know or choose the rake degree?
Are these street safe or show only
yes there are fairing mounts
I like this kit, it appears to just be a front-end raiser and does not add any additional rake, is this correct?
It adds rake to give full suspension travel without raising front. It also uses our short neck technology to reduce the amount raised. See our other videos
@@americansuspension5231 do you have a bolt on kit for a 2002 yamaha roadstar warrior XV1700
Anyone assembled on 08 or older frame? Is there any difference in the installation process?
Do you have the fairing mounts for a 2000 FLHT?
yes
Could you run a 23” with this rake?
They sell a kit for a 23 inch wheel.
Great, very cool idea, but why is there no before and after shot?
You're wanting to show off your product this would have been the way to go not with out of focus close ups that we don't know what we're looking for.
But then with all the unanswered questions I see here maybe your patient pending thing didn't work out for you?
It's a great idea, I really like it but I would have marketed it better. I remember learning of this several years ago but now it's just slipped by everyone's attention.
Good luck, I do love it 👍🇦🇺
do all bolt on kits wobble? im looking yo purchase one
is this a self stabilizing system
Yes this rides better than stock.
Jasper Aguila they don't sell them for my bike man it's a 05 softail
The link i sent should work with softtails 05 and below.
Jasper Aguila hell ya man thanks alot. Just purchased shotgun air ride over the weekend man so hopefully they will hurry up so I can have it ready for the weekend cause I ride to much to be tore down. Thanks brother ride safe
Nomore warranty for my 2021 ughh
Greetings according to the schedule, please send me your email (real email) so I can order my American air suspension kit for front and rear. Thank you very much for your video, thank you very much!
Accident waiting to happen. Extremely unsafe!
safe as a weld on
@@suicidecj5 I watch video a 2nd time and agree; it looks well made. It stretches the forks so it would take some time getting used to new geometry of bike. Have you tired slow speed riding techniques on this part? i.e. U-turns, cones etc.?