Ubiquiti Edge Full Setup and Configuration For Home Or Small Business

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น •

  • @Richard_GIS
    @Richard_GIS 3 ปีที่แล้ว +8

    10:30 thats exactly what i looked for but nobody could explain it, finally you answered the vlan to ap question

    • @thecrimsonraven707
      @thecrimsonraven707 3 ปีที่แล้ว

      That is exactly where I was getting stuck. I did not know you can configure multiple SSIDs, and each to a specific VLAN, as my current AP does not allow it. I will be getting a Unifi AP to replace mine.

  • @GoatDirt
    @GoatDirt ปีที่แล้ว

    Thanks! Literally saved me hours to get this going

    • @MactelecomNetworks
      @MactelecomNetworks  ปีที่แล้ว

      Thanks for the super chat, glad it was able to help

  • @brembou1
    @brembou1 3 หลายเดือนก่อน

    Díky!

    • @MactelecomNetworks
      @MactelecomNetworks  3 หลายเดือนก่อน

      Thanks for the super chat :)

    • @brembou1
      @brembou1 3 หลายเดือนก่อน

      @@MactelecomNetworks Hey Cody, I have your setting. I have WIFI printer. How to allow this printer across VLANS?

  • @jaygreentree4394
    @jaygreentree4394 3 หลายเดือนก่อน

    Still a huge fan of the Edgerouter x here. Watching this makes me want to tinker with it more.

  • @Techie4life
    @Techie4life 4 ปีที่แล้ว +5

    I love your Full Setup videos. Good job Bro

  • @michaelcooper5490
    @michaelcooper5490 3 ปีที่แล้ว +2

    Hey Cody, Good job excellent detail on the EdgeRouter X and EdgeSwitch 10X. I actually have one of each of these and you covered the whole gambit of what I needed to do. I am sure I can get it all ready to rock now. Thank you again Out-Standing Video!

  • @krzychaczu
    @krzychaczu ปีที่แล้ว

    Finally, a comprehensive tutorial! 👍🏆

  • @joeberg9823
    @joeberg9823 4 ปีที่แล้ว +3

    Simple and to the point. Nice job.

  • @videophile897
    @videophile897 2 หลายเดือนก่อน

    Great video! I did hit a snag at 07:44 when I made switch0 VLAN-aware, I lost admin access to my Edgerouter! I tried an ethernet connection on all the Edgerouter ports, but no dice. Did I miss a step?

  • @danieldimke2801
    @danieldimke2801 11 หลายเดือนก่อน +1

    Good video. But i have a EdgeMAX 5-PoE router. When i try to do as you in 7:44 mins, i get this error: "platform does not support vlan settings in switch0 Value validation failed". What to do?

  • @jamesedge8605
    @jamesedge8605 3 ปีที่แล้ว

    Brilliant video mate - very helpful! This is exactly what I want to do to my home setup before I buy the edge router.

  • @danieloconnor3338
    @danieloconnor3338 ปีที่แล้ว +2

    I have a similar setup ER4 and Edgeswitch 24 lite. How do you ge the switch0 interface to show up on the ER dashboard? My setup works but I don’t have the switch0 showing so I don’t think I have my vlans configured properly. Thanks

    • @ronsullivan132
      @ronsullivan132 ปีที่แล้ว +2

      I have the very same question and setup. Did you ever get an answer to your question?

  • @rokello
    @rokello 2 ปีที่แล้ว

    Hi Cody, Just what I have been looking for. Keep up the good work

  • @dan-brotherman
    @dan-brotherman ปีที่แล้ว

    Good God this is so helpful. Thank you so much for taking the time to make this; much appreciated

  • @monocycle77
    @monocycle77 3 ปีที่แล้ว +2

    Is the Edge switch 10x required in this setup? Can the Edge Router X handle the switching for the VLAN's and you trunk a port through to the AP AC and let that handle the wireless networks?

  • @thomasburrows6989
    @thomasburrows6989 3 ปีที่แล้ว +1

    Loved the explanation. Didn't see anything about the admin network.

  • @Phenixzero
    @Phenixzero ปีที่แล้ว +1

    Love your video, it is very intuitive and useful, but can you do a video on how can we properly setup IPv6 on edge router?

  • @bobcharestmusic
    @bobcharestmusic 2 ปีที่แล้ว

    Thank you for this super-helpful video! It couldn't be more clearly explained - Best regards!

  • @Walterz930
    @Walterz930 4 ปีที่แล้ว +1

    Really enjoyed this video the only part of it I don’t have yet is a switch but everything else is the same equipment

    • @MactelecomNetworks
      @MactelecomNetworks  4 ปีที่แล้ว

      Are you just using the edge router x as the switch?

    • @Walterz930
      @Walterz930 4 ปีที่แล้ว

      @@MactelecomNetworks in the uk I have a bt openreach modem coming in on port 0 then my ac lite on port 5

    • @cynaptic
      @cynaptic 4 ปีที่แล้ว

      @@MactelecomNetworks Excellent video. Thanks. Can you just use the Edgerouter ER-X by itself? I recently bought the USW Flex Mini hoping I could integrate it into my current network (Meraki MX65 router with an MR42 AP - required for my work from home setup). No success as of yet. So I was considering the Edgerouter ER-X to work with the Flex Mini to somehow work in conjunction with, but bypass the Meraki network, as I wanted to have a separate VLAN for Home/Personal stuff

  • @19xtrip
    @19xtrip 5 หลายเดือนก่อน

    can you have the same setup without a switch? just the router ERX and UAP?

  • @Rico-yg4fx
    @Rico-yg4fx 3 ปีที่แล้ว +1

    Great Job on the video's. Do you have any plans for short video on the Edgerouter 12? or maybe put me in the right directions on simple setup with few VLANS. Thanks

  • @joaquinluceromusic
    @joaquinluceromusic 4 ปีที่แล้ว

    FIREWALL TUTORIAL FOR FREE!!! Big Thank u!

  • @EduardoSerrano-g7y
    @EduardoSerrano-g7y 4 หลายเดือนก่อน

    Hi. I followed your setup and for a while my network was working great. However, over the past few months, the AP's keep getting disconnected. Any ideas how to troubleshoot this issue?

  • @jonasmeisenheimer7908
    @jonasmeisenheimer7908 ปีที่แล้ว

    would the connection to the internet be an ethernet cable to your isp gateway?

  • @DSN-D
    @DSN-D 4 ปีที่แล้ว +1

    Great Work 🤜🏻🤛

  • @medazz2847
    @medazz2847 หลายเดือนก่อน

    Hello Sir , is it possible to connect ADSL Modem into EdgeRouter X SFP ? and which can be better EdgeRouter X Or EdgeRouter X SFP ? Thank's

  • @seanmatthiesen7229
    @seanmatthiesen7229 ปีที่แล้ว

    At 15:44 an admin_IN pops up on the EdgeMax UI. The video does not cover configuring this Firewall Policy. Please shed light on how it was created and what its purpose is.

  • @decadentpersian
    @decadentpersian หลายเดือนก่อน

    How do you gain access from admin to various interfaces/devices given that you blocked RFC1918?

  • @javiercamacho1673
    @javiercamacho1673 4 ปีที่แล้ว +1

    You are the man .. !!! you are unstoppable with your excellent videos. We will have to invent you a nickname of a superhero, SuperMacTelecom? Naaa, wearing the underpants on the outside is not his style .. !!! who gives me a better name for Cody?

  • @supersamuelyt
    @supersamuelyt 2 ปีที่แล้ว

    Hey! So, I noticed in the switch VLAN configuration, you didn't check any Trunk Port boxes, why is that? I was thinking you would have checked that for Port 1 if that's the port moving your three VLANs between the router and the switch...

  • @chlinecorti
    @chlinecorti ปีที่แล้ว

    Nice video. I think I did pretty much that but without denying inter VLAN routing. Because I'm not yet sure if I'm going to keep the VLANS as they are. Though during my setup I had the issue, that I couldn't connect from the default LAN to the VLANs and I think found somewhere the answer that there is an issue and that I need to configure the default LAN as a VLAN too and remove the IP from the switch0. As I set the VLAN1 and added the default IP there it worked for me but I'm not sure if this is now preventing me from configuring L2TP VPN correctly. did you set up L2TP with VLANS? I tried setting the VLAN DHCP pool to a completely different subnet and I couldn't connect and when configuring an IP pool in the default subnet but outside the default pool I got the same issue. Thanks for any advice!

  • @laeioun
    @laeioun ปีที่แล้ว

    My ISP uses pppoe, I have setup the router for this with no DHCP server, but now I want to setup a UniFi AP. What steps would I have to follow to get it working in that scenario?

  • @matthewbennett2844
    @matthewbennett2844 3 ปีที่แล้ว

    hi there hope all is well, i followed this video and the network is set and working as per your video. I have a vlan 10 as the main network how would i go about allowing that vlan access to management on vlan 1.

  • @RPtheceo
    @RPtheceo 2 ปีที่แล้ว

    Great video! I will need to watch about 7 more times. Will this router work well for implementing into a small IP Camera network that utilizes a Cloud based NVR platform?

  • @mikes1082
    @mikes1082 2 ปีที่แล้ว

    Is it possible to install the Edge Switch to a Linksys router?

  • @kirgaiden
    @kirgaiden 4 ปีที่แล้ว +1

    Well done! If you had a choice for home networks, would UniFi be your choice vs. Edge?

    • @MactelecomNetworks
      @MactelecomNetworks  4 ปีที่แล้ว +1

      I would probably still go with unifi. The edge line does allow for other features like policy routing etc.
      Also the price is a little more competitive.

  • @themightyapefish
    @themightyapefish ปีที่แล้ว

    I have edgerouter x, wan is incoming on eth0 on vlan1, and I also want to use the same interface eth0 for vlan10 in both directions to have a lan with network 192.168.2.xx.. I have tried everything.. I get the dhcp to give out adresses on eth0 to the switch on the other side.. but I can't seem to get access for the vlan10 on the local ports on edgerouter x.. is this impossible?

  • @pavloskairis9994
    @pavloskairis9994 3 ปีที่แล้ว

    @8:50 I wish you could slow down here since you went through too fast to follow. Basically, all trunk ports are unchecked, default is all U except the port I want to Exclude, and VLAN is all E except the corresponding port is U and the port connecting upstream to the router is T. I hope I got it.

    • @MactelecomNetworks
      @MactelecomNetworks  3 ปีที่แล้ว +1

      You can set a slower playback speed on the TH-cam video

  • @thecrimsonraven707
    @thecrimsonraven707 3 ปีที่แล้ว

    On the switch side, why didn’t you need to configure the first port as a trunk port. Is it because of making the router switch VLAN aware?

  • @LaptopDoctor
    @LaptopDoctor 7 หลายเดือนก่อน

    First practical video to show vlans and firewall config.

  • @bberry1208
    @bberry1208 3 ปีที่แล้ว

    Hey man. At 7:40 of the video, in my switch it’s not letting me make eth0 Vlan aware. What do I need to do?

    • @JanTijssenHC
      @JanTijssenHC 3 ปีที่แล้ว

      Same here.....like the video tutorial very much!

    • @remixedMind
      @remixedMind 2 ปีที่แล้ว +1

      because most likely your internet is on eth0, hi uses eth4 for his connection

  • @gmenelau
    @gmenelau 3 ปีที่แล้ว

    many thanks !!!

  • @AtRiskMedia
    @AtRiskMedia 3 ปีที่แล้ว

    Any tips on how to get the LAG working with Windows NIC Teaming? I can team the NICs, and that seems to work and my motherboard has 2 NICs -- but if i add both those ports to a LAG on the edgeswitch (no matter the settings, static vs STP with or without DHCP snooping) then the windows network stops working.

  • @mitchjordan3243
    @mitchjordan3243 2 ปีที่แล้ว

    My new edge router X here's to be working I'm logged into the dashboard but I cannot see any web traffic or CPU usage it is as tho nothings working but it is working. ? I'm confused what's wrong? any help?

  • @AtRiskMedia
    @AtRiskMedia 3 ปีที่แล้ว

    So helpful thanks.

  • @kevinbradt835
    @kevinbradt835 2 ปีที่แล้ว

    I’m trying to setup ddns on my edge router x and when I save and check the configs it says other insted of eth0 and I have tryed setting it up over 50 times and it does the same thing so I’m wondering how do I fix it

  • @visi8194
    @visi8194 3 ปีที่แล้ว

    If I connect an edgeswitch 8 to a udm pro port profiles All, would the switch pass or strip the vlans that exist on udmpro

    • @MactelecomNetworks
      @MactelecomNetworks  3 ปีที่แล้ว

      You would still need to create the vlans on the edge switch and assign to the ports you want them on

  • @ioulios12
    @ioulios12 3 ปีที่แล้ว

    13:38 How do you know what IPs to put in the group?
    Why 192.168.0.0/16?
    Why 172.16.0.0/12?
    Why 10.0.0.0/8?

    • @MactelecomNetworks
      @MactelecomNetworks  3 ปีที่แล้ว +1

      That group is the RFC1918 it covers all private ip addresses in IPv4

  • @bblondet
    @bblondet ปีที่แล้ว

    Hello and thank you for this tutorial. However, how to allow ping from each vlan to their interface? (eg address 192.168.20.5 can ping interface address 192.168.20.1) Thanks in advance.

  • @TrderJ0es
    @TrderJ0es ปีที่แล้ว +3

    Way too fast for basic users

  • @IVYCMS
    @IVYCMS ปีที่แล้ว

    can you help me

  • @Bidimus1
    @Bidimus1 ปีที่แล้ว

    a bit fast but clear over all.

  • @niloferkaleem4008
    @niloferkaleem4008 2 ปีที่แล้ว

    Hi Sir, can i contact you, i need some guidance in configuring EdgeRouter X Sfp