Nespreso Vertuo Pop Forced Descale Procedure

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ต.ค. 2023
  • This will take 20 minutes to complete.
    To force a descale program, switch on the unit.
    Lift the lid to the open position and press and hold the top button for at least 7 seconds
    When the button flashes orange, close the lid and lock the unit then unlock the unit.
    Press the button for 7 seconds again.
    Finally lock the unit then ensure you have descaling solution in the water tank and finally press the button to start the procedure.
    Ensure you have a jug to collect the solution.
    Allow the procedure to empty the tank. When the program empties the tank fill the tank with fresh water and press the button again to complete the fresh water flush.
    When the machine flushes all the water it will flash the button white for a few seconds to indicate that the procedure is complete.
    Allow the unit to cool down for 10 minutes before completing a another program.

ความคิดเห็น • 27

  • @gabrieladoran6270
    @gabrieladoran6270 8 หลายเดือนก่อน +14

    This makes much more sense than the nespresso own video 😂 they should have you on payroll! Thank you so much, will be giving this a go.

  • @soniallyx4223
    @soniallyx4223 7 หลายเดือนก่อน +11

    thank you so much for making this video! the video nespresso made is so confusing 😵‍💫

    • @ChrisHorswill
      @ChrisHorswill  7 หลายเดือนก่อน

      You're so welcome!

  • @tmacgiollarua
    @tmacgiollarua 3 หลายเดือนก่อน +2

    Thanks for the video. Clear and concise. After frustration with Nespresso's video instructions this was life saver.

    • @ChrisHorswill
      @ChrisHorswill  หลายเดือนก่อน

      Thanks for watching!

  • @user-fv9sp6qh8u
    @user-fv9sp6qh8u 5 หลายเดือนก่อน +4

    You are my hero! You deserve endless happiness for creating this video ❤

    • @ChrisHorswill
      @ChrisHorswill  5 หลายเดือนก่อน

      Thanks for watching!

    • @marianne6373
      @marianne6373 5 หลายเดือนก่อน +1

      THANK YOU! I’d almost given up on following Nespresso’s intricate instructions.

  • @Amritkaurnarang
    @Amritkaurnarang 23 วันที่ผ่านมา +1

    This worked! Thank you

  • @dianaaliyeva9487
    @dianaaliyeva9487 2 หลายเดือนก่อน +1

    You are the best ❤

    • @ChrisHorswill
      @ChrisHorswill  หลายเดือนก่อน

      Thanks for watching!

  • @astrowave5702
    @astrowave5702 5 หลายเดือนก่อน +1

    I have the same exact model you got but i have a problem. When the machine tries to pump water, it stops and then shows the red flashing light. Ive watched so many videos and i couldnt find any solutions. The flashing light indicated a machine problem but i cant find anything wrong with it. Can you help me out?

    • @ChrisHorswill
      @ChrisHorswill  5 หลายเดือนก่อน +1

      Have you ensured the cartridge holder is clean so that it can read the cartridges? Also check that the valve on the bottom of the water tank is clear of any blockage so that it can take water.

    • @astrowave5702
      @astrowave5702 5 หลายเดือนก่อน

      @@ChrisHorswill Yes, ive checked everything, i also took the bottom part off to see if the tube is blocked but everything seem to be ok. I also factory reset the settings of the machine...just in case.
      Anyway i would probably get a new one from a different brand.. Thanks for the help!

    • @phcunha1994
      @phcunha1994 5 หลายเดือนก่อน

      did you find the solution ? i have the same case here :(

    • @ChrisHorswill
      @ChrisHorswill  5 หลายเดือนก่อน

      @@astrowave5702You could try the full machine emptying procedure in the other video to see if it does run:
      th-cam.com/video/oVx7l0dMrYU/w-d-xo.html
      You could also try a rinsing procedure too:
      th-cam.com/video/Yka63yQwa6s/w-d-xo.html

    • @ChrisHorswill
      @ChrisHorswill  5 หลายเดือนก่อน +1

      How many times does the red light blink? What does it possibly mean? What do you have to do now?
      Red light stays for 2 seconds and blinks again after 1 second Water tank empty/ error your capsule holder Refill the water tank/check the capsule holder
      Red light blinks and fades after 1-second Overheated Machine Cooling down
      Red light blinks constantly per second Device Error Needs to be checked overall or in special functions.
      Red light blinks after 1-second User Error Action needs to be properly performed. [Cheeky!]
      Simultaneous Red & Green Light Water blocked Descaling required

  • @araxesumali869
    @araxesumali869 7 หลายเดือนก่อน

    Do you have any idea if the rinsing mode is not working, I tried pressing 3x but now working

    • @ChrisHorswill
      @ChrisHorswill  7 หลายเดือนก่อน +2

      This is what works for me:
      -Close and lock the machine to heat up - 30 seconds.
      -Wait for light to go solid White.
      -Place large cup underneath.
      -Press the button three times in quick succession (within 2 seconds).
      -Cleaning takes 2 minutes.
      -You can stop at any time by pressing the button again.

    • @ChrisHorswill
      @ChrisHorswill  7 หลายเดือนก่อน

      Hi, it took me a couple of goes but this is the procedure:
      -Close and lock the machine to heat up (30 seconds).
      -Wait for light to go solid White.
      -Press the button three times in quick succession (within 2 seconds).
      -Cleaning takes 2 minutes.
      -You can stop at any time by pressing the button again.

    • @ChrisHorswill
      @ChrisHorswill  6 หลายเดือนก่อน

      Here is the method I used: th-cam.com/video/Yka63yQwa6s/w-d-xo.html

  • @user-uf7ql2lb4u
    @user-uf7ql2lb4u 6 หลายเดือนก่อน

    i had a vertuo that i loved but this pop machine is for the birds🤬 if you’re thinking of buying this model-DON’T do it it’s terrible