TALARIA STING R MX4 UNBOXING AND ASSEMBLY
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- LunaCycle presents a detailed unboxing and assembling guide for our new bike, the Talaria Sting R MX4 , and we’ll be showing you all the little tips and tricks we use here at the shop!
AVAILABLE FOR PURCHASE HERE: lunacycle.com/...
![[UNCUT] “ช่อ พรรณิการ์” ปะทะเดือด “มัลลิกา” ชี้หน้า สั่งหยุด! I คนดังนั่งเคลียร์ I 22 ส.ค. 67](http://i.ytimg.com/vi/cJ_z_bHnvIE/mqdefault.jpg)
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
Great Video, Everyone please remember 3 very important warnings
3 WARNINGS:
1)You must locate the gearbox vent hose clamp and release it, the gearbox needs to breathe, blocking the vent can result in damage to seals and bearings. You can clamp it back if you need to put the bike on it's side to avoid oil leaking. THat is for the MX4R only, the MX3 does not have a vent clamp
2) Do not remove the bolt at the bottom of the fork leg, this is for maintenance only, not to add air in the fork. If you strip the bolt, break the threads, damage the air chamber you will have to pay for a new fork leg unfortunately. Same with the rear shock, it's not user adjustable.
3) Rotors have oil on them, to prevent rust during sea shipping. You have clean both rotors with brake cleaners or isopropyl alcohol. Failure to do this will just result in squeaky brake for the first couple rides.
You must turn the breaker off before connecting the battery and you must turn off the breaker before unplugging it. If you don't you risk to damage the connector.
The new electronic throttle is not plugged so please be careful not to pull the wiring and to line up the pins the correct way when plugging it.
Lunacycle will not replace your throttle if you rip the wires out of the handle or crush the cable.
Yeah we needed this video. There are going to be alot of folks having gear box issues watching other assemblies that don't show the gear box tube un clamped
I bought a new one assembled and wasn’t told about the tube clamp. Thanks for the video!
@@ubroberts5541could you tell me what part of the video talks about this? I’m hoping I didn’t do anything wrong with my talaria
@@ubroberts5541
If it cashes get the mx3 motor.
th-cam.com/users/clipUgkxznrctRwOEpw9jf8n_WlJmwynHL22Uk5t?si=kExciTKi1xRLvgsO
I cannot wait for my sting r I am absolutely pumped!!!!
Let me know when you get it! We can collaborate insta shorts!
Same
I’m waiting too!
Mine just landed, this is exactly what i needed. Cheers from Texas, and happy riding 👈😎👉
I placed my order a week ago, supposed to be here in late May. Cheers from Dallas, Tx too
I purchased the Luna Galaxy paint a few years ago and I just like to send my regards to the brilliant person who designed that bike. It's a perfect all-season all-terrain bicycle
Glad you are enjoying it!
Great coverage! Waiting for mine to arrive, this was a great video to watch prior and I will watch again during assembly!
I think the very first thing that should be done is. Pull the battery out and get it on the charger right away. Then you can finish the build and setup as the battery charges.
What an excellent tutorial video! 👀
Thank you! 🙏🏼
I’m trying to save for one they are awesome
Great tutorial. I almost feel like watching this video should be mandatory for anyone purchasing/assembling this bike. Also, exactly how tall is Kyle? He makes that MX4 look like a child's pit bike, lol!
2:58. Can you make any suggestions on what Talaria might be able to change, that would make the axel removal NOT be "the most difficult part of the build"?
This is the first I've heard of the gearbox vent tube clamp. I have seen reports of gearbox oil leaks when the bike is transported on it's side. Does clamping down the vent hose really prevent this? I have asked Luna sales about gearbox oil leaking when transporting the Talaria on it's side and they didn't know the answer. They said I should consider buying the surron instead. Not the answer I was looking for because I really want to order the new Talaria.
yes when you lay the talaria on its side when transporting you should clamp the tube to prevent gearbox leaks
@@lunacyclerepair I've been riding for around 2 weeks and this is the first time I've heard about this gearbox vent tube. Do you think any damage has been done or anything I need to worry about?
@EpicMope send it!
@@DonChetoAlAire what
@@lunacyclerepair Hi dear, i have the TALARIA MX3 Street Legal (TL3000) and has this problem : after a little fall the speed indication on the Display shows the speed with little delay, i can start rolling 2-3 km/h but its shows 0 km/h after i get faster its start to shows the speed indication with delay, what can be the reason and how to fix that ? i also have this Match setting but after i start matching it shows me matching fail after 30 seconds
Please help me to solve this problem
Thank you.
Just assembled today thanks for the detailed assembly. What’s the small rubber rectangle grommets for?
Just waiting for the day i get to watch this video with my own talaria sting r
does the stock bike come with the gearbox oil or do i have to put it in myself
thank you ! mx4 came today in the uk just finished building
I ordered a Talaria Sting r mx4 from Luna cycle 4 days ago and it says placed but isn’t in processing , I was wondering how long processing usually takes? I have sent them a text asking and I will be sending a email soon and give them a call
Why does your manufacturer sticker look different than mine? Mine is a 2024, and it’s like riveted to the frame.
does it come with instructions????
can u make one abt the x3 because i'm considering buying one
CANT WAIT GUYS!
appreciate this super thorough video. ill be replicating it soon hopefully! ordered 5/30.
Hi im thinking about buying this thing, how long can i realisticly expect it to last, 2-3 years or more u guys think?
Best video tutorial
Good info.
What size are the spoke lugs?
Do you guys know what wire to cut
Im ordering this in a couple weeks
Thank you
Hi can you tell me why my bike will not start or charge thanks
Do you guys have a chart or something for all the torque specs for each bolt and stuff?
Very good tutorial
Do you need a torque wrench to make sure bolts are tightened to specs?
no
What are the two small thin little rubber strips that come included with the bike parts? I’m assembling now according to this video and have these little strips I don’t know what to do with
I’m pretty sure those are just for cable management for the wires connecting to handlebars.
He explains this @ 1:30
I missed that! Thank you!
I think you meant to say non marring, or rubber mallet, but just saying mallet people will still use metal.
It didn't seem to be messed up so I give you benefit of the doubt, but just curious why use a non marring mallet to start than switch to metal extension?
Great vid. Thank you.
well done, thanks
Removing the axle was very easy once we played with the handle a little, it got slack enough to removing it with my fingers only, if this may help someone.
i cant get my front axle off://
help plz.
thank you
Is the rear brake caliper supposed to have some forward and backwards wiggle free play?
After ordering my Sting R from you guys at lunacycle, I just received my bike about 2 hours ago, assembled it via this video and my screen won’t stop displaying “wait” tried trouble shooting, unplugging and replugging the connectors, kick stand up, key on, relay to the right, press red button and still says wait..do you guys have any info that could help with this?
Did you ever fix it and if so, can you explain to us what the issue was?
what is i do not have any tools that are needed for taking the axel out and other things?
Do you have a how to put on decal video??
If not you very much need one
O ring came broken on one of my front wheel spacers. Is it okay for now or important to replace
Hopefully by 2026-2027 I am going to by this bike From Luna cycle
Why only peel 1/2 the double stick tape? I assume you peel the rest later.
Where’s the graphics kit? Does it not come with blue graphics?
Make sure you cut the brown wire so you get to do 50 miles an hour😂🤙🏻
Hi, my talaria do not come with a key it is the sting r and a question where is it?
Whats the box dimensions? I want to drive down and get one, but id need to put it in my suv as my truck is not working rn
when are the preorders shipping?
Hello, how much would shipping / taxes to EU - specifically Poland... cost?
How long does it normally take to deliver
Two weeks
how much does the bike cost with licensing, tax and shipping
first thing that should be done is to take the battery out and top it off with a complete charge... while you assemble the rest of the bike.
thank you..that is very good point
just ordered!
I’m 5’5” tall and ready to buy one mx4 or the XXX . But my question is , which ☝️ do you think is best bang for the $ with the most potential for street only. And which is best for my height
you could benefit from the xxx, but the mx4 is a lot more bike for only 1200$ more. If this is your only surron, talaria, etc., I'd go with the mx4 if you can afford it
I’m 6,3” 350, am I to big for this bike?
It’s really hard to judge the size of this bike
yeah im 6ft 240lbs and im pretty big on it
Is this the reason Surron no longer rocks wit y'all?
Do u have to change the ye oil in the new bikes ??
Yes after you ride a certain mileage for the break-in period, looks like they include some oil for it as well.
Afterwards the intervals are longer
Bad business for switching original battery stickers and putting a 45ah when it’s actually 43.2ah
Thanks. How u uncroc
Nice 👍
do you ship to barbados?
Quanto custa uma bike dessa?
is there a l1e version of this? and what would be technical differences?
Not in the United States
Seems like they’re offering them everywhere else though
what shoes are those?
When Will next Stock be available again? :)
we are now taking preorders for early may delivery and we are on schedule.
Promo code for MX4????
The price
How tall are you. I want to know so that I know the scale of the bike and see if I would fit. I'm 5.11
No one will answer my question and I've asked alot of people
Their are men over 6ft and weighing 250lbs + who own and love the Talaria.
kyle in the video is 6 foot 5
Thank you
Why not just unscrew the wood on the front axle and then remove the axle without hammering on it?
Also I like how you exactly know how tight 10nM are just with a small allen wrench, must have a torque wrench built in your wrist
@@Fexiven that's what I was wondering? Does this mean Luna Cycles doesn't think you need a torque wrench to tighten the bolts?
how may i come opon one of these electrical bikes for free
Everyone gets a free ebike in fairytale land! 😊
@@allemander yippee
It's called: your dreams
Go to the dump and scavenge and hope you find one lmao
Why don't you show charging????
The Sting R needs a much better display than that rinky dinky cheapo.
I have one and it’s fine.
I would put the front tire on first
Ya cause I can’t open it
To boring
this is why i check all my bike bolts, even the luna cycle maintenance isn't using thread locker