Video is 4 years old and so far I watched 5 videos on this subject and this one helped me and the other have not thank you again for the info and art bro wish u were still here RIP
I have spent the whole afternoon trying to upgrade using someone else's how-to clip and got nowhere. Spent a few minutes watching your clip and upgraded no problem. You are now my go-to Taranis guru. Many many thanks - and keep up the good work.
I actually was able to upgrade the firmware on my original taranis, (not the plus), using this. I did have to get the zadig from a different source, as the one you show was no longer working, but went smooth. thanks for the great video, and easy to understand. You could go a little slower, for those of us that are a little slow, but not pushing any buttons, even on the taranis, without letting us know what you are doing, but it did not affect this helpful video. thanks!
Very informative, and I like the way you dont assume that we know everything, and you explain the simple things, thanks heaps. I discovered recently, that to flash to 2.2, I first need to be flashed to 2.0, or higher. You might want to add that somewhere, as I lost 4 hours of my life trying to flash from original firmware, to 2.2. Thanks again.
I have the Taranis X9D plus. I got and loaded the firmware for my S8R receiver and flashed it. When I tried to calibrate it w/ SXR, the first pic came up showing which way to orient the receiver. After that nothing would occur after I hit enter. What do you think might be the problem?
So I was having trouble binding a XM+ to a taranis x9d so I watched one of your other videos, after realizing it was probably my controller the was way out of date (bought 2019) I followed your instructions on this video as close as I could begin an older video! I’m devastated my controller doesn’t have any tools the bind feature is completely gone now and all of the models I had set up don’t work! I would appreciate any help! With the bind missing from the setting I really have no idea what to do?
Hay man, hope you can help. i used to use mr taranis on the DRL sim, but since ive updated my firmware, i get no sign of the taranis on the pc other than memory card as "mass storage". i check in devices and all i have is vjoy. any clues to what i should do? smart audio and all functions work great in real flight. but its wet here a lot haha. Hope you can help me. cheers, joe
Helo masta...i would to seek your help, if you would mind. I have taranis, but some how i think i do bad step...i accidentally deleted the firmware file in my radio (not in sdcard)... And now i am not able to write firmaware from opentx companion... It show error message in my computer "ca not write firmware..(unknown error)" Would you kind to help me what i need to do... Big thanks
I have the older non plus version with X9d-v1.1.02. Its the one that just says ACCST. Do I do the same thing to upgrade my firmware? I would greatly appreciate your help on this. Thanks
Also. When I plug in my taranis with it turned off, it doesn't register on my PC. As in I get no folder in the MY PC tab that says Taranis, nor do I one that represents the memory of taranis. I think this might have to do with why I cant use my Taranis for simulators. I would appreciate it so much if someone could help me with this. Thanks
I am trying to upgrade my firmware by the sd card method, as my taranis plus is not recognised by windows on my PC. I have been trying for three days to find how to locate the opentx 2.2.0 .bin file. I have copied the complete download from the companion into my sd card, hoping that the taranis will sort out the required .bin file, but no. I am getting messages like "Directory missing" , and "file not recognised" or something similar, I just need pointing in the direction of the required .bin that Taranis needs. PLEASE.
Dhello project blue falcon:thank you for recorded so much useful video,i have oneproblem i flash the firmware for multi high frequency recently, but now when i want creat model ,the screen X9D just show airplane&zagi&drone,no heli.can you help me solve the problem?
Hi, thanks for the great video! But after I've upgraded I used to be able to flip a switch and get my rssi reading every 2 seconds. Now when I try to set up the switch there is no rssi selection I can make. Do you happen to know how I can enable this again or at least look at what my rssi is when I want to start doing range checks? Thanks
When selecting SD Structure Path, I don't have the USB folder your stressing is so important to this whole process. Is there anyway I can just select the (C) drive? Also, my pc goes crazy whenever I plug the taranis in after pushing inwards the 2 trim switches while simultaneously turning on the taranis. Any idea why this is? Thanx for any help man. Really wanted to update this firmware...
Anyone know how to fix the sdcard warning on Taranis x9D+? I updated to 2.2 so I could use LUA scrip to adjust my PIDs from Taranis screen. Now I get a warning screen on start up. And scrips won't work, it says no scrips found.
PBF; watched your vid on updating firmware on T-plus. Will the firmware update maintain all of my models and settings in their currents modes. Would it be wise to copy all current settings and models before I do the upgrade, should something happen. if so, is there a recommended process of saving current settings, such as copying onto the computer or saving it to sd card... Thumbs up on you vids
hey JC, I flashed my Taranis just the way you said and now I have a syntax error, I tried returning it back to factory settings and I still have the syntax error. any suggestions?!!!
hi jc. I'm gong to buy an international version of the q x7. so I will have to flash the internal module to LBT. Don't think you covered flashing the module or have I missed it? and second..if I save the eeprom from my models, can I restore them on the q x7? thanks
Im stuck with the the exact thing you described . When i try to turn it on it just vibrates and squeals and the screen is blank. I here be trying to write firmware from the menu your at by turning on the radio with the two trim buttons held on, i previously put the firmware on the sd card and i can still access the memory card but thats about it. so im still stuck here because that the only screen that does anything. All other attempts and tutorials require me to get into the main menu of the tx turned on normally.
so im up to @5.30 when i open up open tx a messages pops up and ask me firmware opentx-x9d+ does not seem to have ever been downloaded. do u want to downlaod. so i download and then a error message comes up and says invalid language. im trying to factory reset my taranis please help
I didn't need to download Zadig on Windows 10, seemed to work fine without it. Maybe they updated it to be plug and play? In any case I just backed everything up first and it flashed correctly the first try.
Just upgraded to 2. 2 with new amber files to match but no amber just beeps :( I did it with the Sd card in a card reader. Finally discovered I hadn't put the sound files in the root directory but in a sub directory. Copied all sound files up a level and Amber returned. Ver now shows 2.2 then it requested a bootloader update. Clicked ok all working fine. Thanks Joshua
I updated fermware, bootloader and SD card to 2.2.1 and now I have lost my connection with both liftoff and Velocidrone. Any thoughts on this? Everything is working properly in devices.
You will lose the EU version I believe. The firmware I use in the video is non EU. You may be able to find the EU version on frsky-rc.com but I just checked and looks like the page is temporarily down right now. Or you could just leave it. I havent noticed any differences from .6 to .9. As long as its newer than 2.0 then you're fine.
If you're talking about the one you pick from the dropdown box, then choosing FrSky Taranis bootloader is fine. Just choose that one and put the WINUsb driver on it.
I did the same, couldn't get my Taranis 9XD + to work. I called Frsky out in California they walked me through downloaded some program that works. Don't know what can't remember his name the one on the video, has done. It doesn't work.
I have updated the firmware but now for some reason every time I turn on the radio I get an "SD Card Warning" Expected version 2.2v0013 Press any key." Is this normal? Also, all the model images disappeared.
You have to update your SD card contents. Copy the contents from this download to your SD card. downloads.open-tx.org/2.2/sdcard/opentx-x9d%2B/sdcard-taranis-x9-2.2V0013.zip
can anyone help? when I plug in the taranis in bootloader mode, it says it doesn't recognize drive f and to repair it. well I click repair and it says successful but then doesn't let me access drive f (which is the usb drive f) says it's empty. doesn't show anything but i still have all the sounds on my taranis. it's weird. need help
Thanks for the videos, I know they take a long time to do from experience and my channels. Just wanted to point out I did the MAC firmware update, almost all was the same. If you would like to add a Mac update to your playlist and videos o can do it again and screen record it. I through the footage up on a share you can download from and make the video. Two things went wrong following the playlist so far. Maybe you have the videos but never added it to them to the playlist? 1: No sound, even after turning on the sound. 2: SD card error firmware mismatch. So I unzipped the SD card file contents and just copied it to the SD card. I found it was much faster to remove the card and plug it into the computer or a USB to SD adapter on the computer. Also decided to give it a bigger card since I'll probably store all the files on the card and not my computer. Or both, but this way if I'm not at home and have an issue I can find a computer, install the apps from the SD card and restore and restore previous version. As you know once I turned on sound in the settings and updated the SD card contents the sound works again. I just overwrote everything since it's a new controller, so no models or settings lost. But I did backup the models in the app just in case also. Again, not complaining. I'm sure you have the video on your channel and maybe just not part of the playlist. Thanks again for the tutorials.
Ok, update. As o went onto the next video it looks like the sound fix video is in the playlist. I think it might need bumped up one spot to go before this video. Then all will make sense and be good in the world again, lol.
Great Video EXCEPT you didnt Remind up to save our setting for all our R/C Crafts, UG Guess its back to the drawing board cause it didnt go the way I thought . I lost it all. But I needed to clean up anyway and make some adjustments too. Great day for it SNOW STORM day.
i did everything, you and every video said i know nothing about the new receivers and all this betaflight or radio. please tell me a video that will bind and fly my whoop. Or what I'm doing wrong.
What do you suppose an "SD Card Error" means? It says "v.2.1.0 expected" (the latest one I downloaded from OpenTX was 2.2.0). I selected the SD card folder in Zadig 2.3. My anti-virus software was going nuts ... high threat "bloodhound.boot.string" was detected and purged. Nuthin's easy... :-/
Just used this guide to flash my taranis to the RC10 of opentx 2.2. Thanks for the steps! BTW - I knew you had a video on it and was just about to pull it up when I noticed the article I was following had a link directly to this video as well! lol. Have you seen this yet? www.nitbeatfpv.com/frsky-taranis-pid-settings I just tested it out on one of my builds that has a Kiss FC with an XSR running betaflight 3.1 and it works great! I can now adjust my PIDs from the taranis menu. It's very cool that this was even an option.
Bricked!!!!! Love your vids, but I just followed your video perfectly and uh oh. All went just as you've shown up to 10:00 mark. I unplugged it the USB as you instructed. Then turned the transmitter off as instructed, then flipped the switch to on......and nothing....nothing at all. It wont even turn on or at least it appears to not be on. No graphics, light, or sound. ___ EDIT ____ I found the issue. You skipped some steps. I had to electronically EJECT the sd card. Then I could pull the plug. I then selected EXIT on the Taranis bootloader screen. Now I can turn it off and back on and all is well. I have to give this to the following video th-cam.com/video/TzKLwAw1tw8/w-d-xo.html
you Sir are one of the few UTube channels that does not presuppose certain levels of knowledge. As a Noob this makes my life so much better. Thank you
Video is 4 years old and so far I watched 5 videos on this subject and this one helped me and the other have not thank you again for the info and art bro wish u were still here RIP
5 Years later and you are still helping me. No one like you after all these years. Rest easy
2020 and I'm Still learning from your videos JC.. RIP you will always be remembered..
What happened to JC? His vids have been a good help.
Brilliant video. You are greatly missed
I have spent the whole afternoon trying to upgrade using someone else's how-to clip and got nowhere. Spent a few minutes watching your clip and upgraded no problem. You are now my go-to Taranis guru. Many many thanks - and keep up the good work.
You just don't know how much this series is appreciated. Thank you so much!
RIP bro - you are not forgotten
👍Your video helped me a lot. I almost threw my receiver and transmitter in the trash. Thanks for the video and keep up the good work!
Yep this guy was the best sadly he was killed six years ago in a bike crash.
I actually was able to upgrade the firmware on my original taranis, (not the plus), using this.
I did have to get the zadig from a different source, as the one you show was no longer working, but went smooth. thanks for the great video, and easy to understand.
You could go a little slower, for those of us that are a little slow, but not pushing any buttons, even on the taranis, without letting us know what you are doing, but it did not affect this helpful video.
thanks!
Thank you dude. My boy and I have been having trouble and you helped so much.
He passed away but I'm sure he would be glad to know you and your boy got it working!
Just what I was looking for! I am getting my taranis delivered today and I have to update firmware.... Thx man... Great video and easy to follow 👍
Very helpful video, you are missed bro.
Very informative, and I like the way you dont assume that we know everything, and you explain the simple things, thanks heaps.
I discovered recently, that to flash to 2.2, I first need to be flashed to 2.0, or higher. You might want to add that somewhere, as I lost 4 hours of my life trying to flash from original firmware, to 2.2.
Thanks again.
Thanks, appreciate everything you do for the hobby!
Thanks bud. I'll keep doing my best.
Great video! Thanks so much, it worked! All the other videos were too long and got off topic or had bad English, so I'm glad I found this one!
I have the Taranis X9D plus. I got and loaded the firmware for my S8R receiver and flashed it. When I tried to calibrate it w/ SXR, the first pic came up showing which way to orient the receiver. After that nothing would occur after I hit enter. What do you think might be the problem?
So I was having trouble binding a XM+ to a taranis x9d so I watched one of your other videos, after realizing it was probably my controller the was way out of date (bought 2019) I followed your instructions on this video as close as I could begin an older video! I’m devastated my controller doesn’t have any tools the bind feature is completely gone now and all of the models I had set up don’t work! I would appreciate any help! With the bind missing from the setting I really have no idea what to do?
Bonjour, est ce que vous pouvez me proposer un récepteur compatible avec cette radiocommande et qui a 12 canaux ou plus?
R.I.P bro 👊🏼
Hay man, hope you can help. i used to use mr taranis on the DRL sim, but since ive updated my firmware, i get no sign of the taranis on the pc other than memory card as "mass storage". i check in devices and all i have is vjoy. any clues to what i should do? smart audio and all functions work great in real flight. but its wet here a lot haha. Hope you can help me. cheers, joe
Hi!! I'm curious if you ever found out about losing sim connection after the Taranis firmware upgrade. I'm having the same issue.
thanks i followed your video and worked perfect, trying to bind the frisky taranias and x4r rx is a handful, next to see if it'll bind now
Helo masta...i would to seek your help, if you would mind.
I have taranis, but some how i think i do bad step...i accidentally deleted the firmware file in my radio (not in sdcard)...
And now i am not able to write firmaware from opentx companion...
It show error message in my computer "ca not write firmware..(unknown error)"
Would you kind to help me what i need to do...
Big thanks
@ 5:26 I got there and I get no screen to "write Firmware" X9D not plus. Grr...Hmmmm...
I have the older non plus version with X9d-v1.1.02. Its the one that just says ACCST. Do I do the same thing to upgrade my firmware? I would greatly appreciate your help on this. Thanks
Also. When I plug in my taranis with it turned off, it doesn't register on my PC. As in I get no folder in the MY PC tab that says Taranis, nor do I one that represents the memory of taranis. I think this might have to do with why I cant use my Taranis for simulators. I would appreciate it so much if someone could help me with this. Thanks
I am trying to upgrade my firmware by the sd card method, as my taranis plus is not recognised by windows on my PC. I have been trying for three days to find how to locate the opentx 2.2.0 .bin file. I have copied the complete download from the companion into my sd card, hoping that the taranis will sort out the required .bin file, but no. I am getting messages like "Directory missing" , and "file not recognised" or something similar, I just need pointing in the direction of the required .bin that Taranis needs. PLEASE.
Thanks for all your videos, it really helps my forward...
Dhello project blue falcon:thank you for recorded so much useful video,i have oneproblem i flash the firmware for multi high frequency recently, but now when i want creat model ,the screen X9D just show airplane&zagi&drone,no heli.can you help me solve the problem?
Another excellent video! Thank you for educating me. Keep it up.
Hi, thanks for the great video! But after I've upgraded I used to be able to flip a switch and get my rssi reading every 2 seconds. Now when I try to set up the switch there is no rssi selection I can make. Do you happen to know how I can enable this again or at least look at what my rssi is when I want to start doing range checks? Thanks
When selecting SD Structure Path, I don't have the USB folder your stressing is so important to this whole process. Is there anyway I can just select the (C) drive?
Also, my pc goes crazy whenever I plug the taranis in after pushing inwards the 2 trim switches while simultaneously turning on the taranis. Any idea why this is?
Thanx for any help man. Really wanted to update this firmware...
Anyone know how to fix the sdcard warning on Taranis x9D+? I updated to 2.2 so I could use LUA scrip to adjust my PIDs
from Taranis screen. Now I get a warning screen on start up. And scrips won't work, it says no scrips found.
PBF; watched your vid on updating firmware on T-plus. Will the firmware update maintain all of my models and settings in their currents modes. Would it be wise to copy all current settings and models before I do the upgrade, should something happen. if so, is there a recommended process of saving current settings, such as copying onto the computer or saving it to sd card... Thumbs up on you vids
hey JC, I flashed my Taranis just the way you said and now I have a syntax error, I tried returning it back to factory settings and I still have the syntax error. any suggestions?!!!
hi you never mentioned the sd card error after updating firmware, because the open tx was on a different version of my sd card.
hi jc. I'm gong to buy an international version of the q x7. so I will have to flash the internal module to LBT. Don't think you covered flashing the module or have I missed it? and second..if I save the eeprom from my models, can I restore them on the q x7?
thanks
hi jc. you tink it's possible to explain how to change the internal xjt firmware from international to eu and back?
thanks
hi
you didnt mention when updating the firmware if you are from the EU you must tick the eu box in settings.
Thanks for this video, R.I.P
Thank you for this video I somehow screwed up my taranis programs and this helped restore it
may i need to update rhe RX too?
Is this needed because I have a Mac or is there an alternative? great video's by the way!!!
Hey Jc when are you going to do a upgrade from 2.1 to 2.2. I hear you can adjust your pids with a lua script
Im stuck with the the exact thing you described . When i try to turn it on it just vibrates and squeals and the screen is blank. I here be trying to write firmware from the menu your at by turning on the radio with the two trim buttons held on, i previously put the firmware on the sd card and i can still access the memory card but thats about it. so im still stuck here because that the only screen that does anything. All other attempts and tutorials require me to get into the main menu of the tx turned on normally.
oh yeah when i try to flash with the companion software it says the bootloader isnt compatible
Hi I have a question trying to hook up crossfire in lua script I can get into tx nano script but not xr nano script says device script killed 101
so im up to @5.30 when i open up open tx a messages pops up and ask me
firmware opentx-x9d+ does not seem to have ever been downloaded. do u want to downlaod. so i download and then a error message comes up and says invalid language. im trying to factory reset my taranis please help
and when i slect sd structure path my computer says there are no drives for the sd card?
I cannot get my Taranis X9D to load Bootloader upon powering up. Please help
try again, i also thought it wouldn't work. Had to try around 30x till i got into bootloader
I didn't need to download Zadig on Windows 10, seemed to work fine without it. Maybe they updated it to be plug and play?
In any case I just backed everything up first and it flashed correctly the first try.
Just upgraded to 2. 2 with new amber files to match but no amber just beeps :(
I did it with the Sd card in a card reader. Finally discovered I hadn't put the sound files in the root directory but in a sub directory. Copied all sound files up a level and Amber returned. Ver now shows 2.2 then it requested a
bootloader update.
Clicked ok all working fine.
Thanks Joshua
I can't find the "USB drive". Any ideas?
It works. Win7 x64.
I updated fermware, bootloader and SD card to 2.2.1 and now I have lost my connection with both liftoff and Velocidrone. Any thoughts on this? Everything is working properly in devices.
Hey, Shawn. I'm curious what you figured out concerning losing connection to the sims after the Taranis update. I am in the same boat right now.
I have the taranis plus EU version and it has v2.1.6 currently. using this way to upgrade to v2.1.9 will it affect the taranis in any way?
You will lose the EU version I believe. The firmware I use in the video is non EU. You may be able to find the EU version on frsky-rc.com but I just checked and looks like the page is temporarily down right now. Or you could just leave it. I havent noticed any differences from .6 to .9. As long as its newer than 2.0 then you're fine.
Really Helpful
is the proces the same with the qx7?
trying to reinstall driver but it doesnt work i can only choose the device Frsky taranis bootloader not stm32 bootloader? please help :(
If you're talking about the one you pick from the dropdown box, then choosing FrSky Taranis bootloader is fine. Just choose that one and put the WINUsb driver on it.
I did the same, couldn't get my Taranis 9XD + to work. I called Frsky out in California they walked me through downloaded some program that works. Don't know what can't remember his name the one on the video, has done. It doesn't work.
Sorry if you upgrade the opentx, you lost all configurations and models? Thanks and good video
for anyone wondering why their questions wont get answered its because he recently died in a motorbike accident. RIP bro
I have updated the firmware but now for some reason every time I turn on the radio I get an "SD Card Warning" Expected version 2.2v0013 Press any key." Is this normal? Also, all the model images disappeared.
same...
I can’t even get mine to update. But I still get that warning.
I've got the same problem. Thought about doing the reset long press. I don't know.
th-cam.com/video/-IjXpcpaWQk/w-d-xo.html
You have to update your SD card contents. Copy the contents from this download to your SD card. downloads.open-tx.org/2.2/sdcard/opentx-x9d%2B/sdcard-taranis-x9-2.2V0013.zip
Has anyone had the issue after upgrading the firmware and bootloader with D8 mode? I am no longer able to bind some of my smaller quads.
when I plug the taranis in the pc it doesn't make any sound , and if I take the sd card from the radio and try to read it , it doesn't read it
Great video! RIP
can anyone help? when I plug in the taranis in bootloader mode, it says it doesn't recognize drive f and to repair it. well I click repair and it says successful but then doesn't let me access drive f (which is the usb drive f) says it's empty. doesn't show anything but i still have all the sounds on my taranis. it's weird. need help
Try this th-cam.com/video/RVs0rTiEVP8/w-d-xo.html
You just saved my ass. Well, not my ass, but like 30$ I was about to spend on a new receiver. Thank you.
Project Blue falcon (JC) passed away bro. glad his old vids still helping ppl out
Are you serious?
Techdragonz yeah go look it up
Thanks for the videos, I know they take a long time to do from experience and my channels.
Just wanted to point out I did the MAC firmware update, almost all was the same. If you would like to add a Mac update to your playlist and videos o can do it again and screen record it. I through the footage up on a share you can download from and make the video.
Two things went wrong following the playlist so far. Maybe you have the videos but never added it to them to the playlist?
1: No sound, even after turning on the sound.
2: SD card error firmware mismatch.
So I unzipped the SD card file contents and just copied it to the SD card. I found it was much faster to remove the card and plug it into the computer or a USB to SD adapter on the computer. Also decided to give it a bigger card since I'll probably store all the files on the card and not my computer. Or both, but this way if I'm not at home and have an issue I can find a computer, install the apps from the SD card and restore and restore previous version.
As you know once I turned on sound in the settings and updated the SD card contents the sound works again. I just overwrote everything since it's a new controller, so no models or settings lost. But I did backup the models in the app just in case also.
Again, not complaining. I'm sure you have the video on your channel and maybe just not part of the playlist.
Thanks again for the tutorials.
Ok, update. As o went onto the next video it looks like the sound fix video is in the playlist. I think it might need bumped up one spot to go before this video.
Then all will make sense and be good in the world again, lol.
Great Video EXCEPT you didnt Remind up to save our setting for all our R/C Crafts, UG Guess its back to the drawing board cause it didnt go the way I thought . I lost it all. But I needed to clean up anyway and make some adjustments too. Great day for it SNOW STORM day.
I got a comment when I write the firmware , new firmware is not compatible with the one currently installed
i did everything, you and every video said i know nothing about the new receivers and all this betaflight or radio. please tell me a video that will bind and fly my whoop. Or what I'm doing wrong.
i have the tinyhawk and taranis plus i watched yours and other videos and cant find nothing happening. will not hook up. pluged the usb in nothing.
Using the zidweg messed up drivers and now tx won't connect. 🤬
Thanks so much for your instructions !!!!! Love your Videos
Very Clear !!!
Thums up !!!!
Subscribed
Updated to 2.3 and lost all switches except SE... Hmmmmm
RIP Brotha
Very nice.
I cant find STM 32 BOOTLOADER
Was all excited but now I find out I can't get zadig on mac...
damn I have a mac too. what's the alternitive?
What do you suppose an "SD Card Error" means? It says "v.2.1.0 expected" (the latest one I downloaded from OpenTX was 2.2.0). I selected the SD card folder in Zadig 2.3. My anti-virus software was going nuts ... high threat "bloodhound.boot.string" was detected and purged. Nuthin's easy... :-/
Just used this guide to flash my taranis to the RC10 of opentx 2.2. Thanks for the steps! BTW - I knew you had a video on it and was just about to pull it up when I noticed the article I was following had a link directly to this video as well! lol. Have you seen this yet? www.nitbeatfpv.com/frsky-taranis-pid-settings
I just tested it out on one of my builds that has a Kiss FC with an XSR running betaflight 3.1 and it works great! I can now adjust my PIDs from the taranis menu. It's very cool that this was even an option.
Thanks mate, now my radio doesnt work
Bricked!!!!! Love your vids, but I just followed your video perfectly and uh oh. All went just as you've shown up to 10:00 mark. I unplugged it the USB as you instructed. Then turned the transmitter off as instructed, then flipped the switch to on......and nothing....nothing at all. It wont even turn on or at least it appears to not be on. No graphics, light, or sound. ___
EDIT
____
I found the issue. You skipped some steps. I had to electronically EJECT the sd card. Then I could pull the plug. I then selected EXIT on the Taranis bootloader screen. Now I can turn it off and back on and all is well. I have to give this to the following video th-cam.com/video/TzKLwAw1tw8/w-d-xo.html
How to set up EU or non-eu firmware
None of this works.
NO! Don't Do It Unless You Want To Reprogram The WHole Thing!
wtf