DieselPumpUK do you think it would be possible for you to do a video showing how to install 8mm elements in a stock pump. I've seen that you sell them and wondered what it would take to build one.
I haveno idea what im getting into, so im just gonna ask: would this kit (plus a rebuilt fuel pump) be ALL I would need to go on a 1999 w210 om606? Would I need a different trans? Bigger intercooler? It currently has a 3" turbo back straightpipe, but that is it.
Hej i‘m from Austria and i like your videos with the om 606 :))) I have a 320 cdi om 613. I want to put on the high Pressure Pump from the 400 cdi and the Injektors from c30 Cdi. And a Holset hx52 turbocharger. What do you think about this?
Why is the air filter and primary intake under the hood sucking all that hot air into the turbo? You will get more power if you reduce the air temp going into the turbo. It's all about air density. The cooler temp the better. Put a shield around the air filter to isolate it from the under hood air. Have the shield go to the front of the grill and get clean cooler air....do not place t behind the radiator. You will get more power every time.
Can you fit an OM 606 into a W204 2009 estate? Only issue is current motor is a 1.6 ( C180 Blueeficiency):))) I guess I need to sell it and grab a 2000 something E class Diesel with problems.
Are om603 any good and do you guys sell upgrades for them? Only ask if I'm on a budget and here in usa only way to get that engine is buying an old 300sdl and the om606 came on a later chassi e class only.
Guys, will there be a budget kit for the OM605? Mine is stock at the moment and Auto, so would the box take the torque and power? Pump swap would need to be done as well, by you guys though.
I have the same question. Have a W201 with the OM605 on an automatic transmission. Could someone answer about how the 5cylinder Turbo diesel parts from a early Ssang Young 2.9 fit to make my non turbo diesel going turbo?
thejewwhale because of how light the Mazda is and how heavy the om606 is, you'll probably never go in a straight line again... Also you can make anything fit anything, depends how much you're willing to have out of the bonnet/hood and how much room you need to use the pedals!
thejewwhale try an om601 or a 604. both are 4 cyl. anything more than that, and it's major fabrication time. to swap the engine's I'm telling you to, you'll already have to fabricate a little. hope you know someone who can weld. let me know if you do this. I'd love to see it happen.
I think a VW TDI 1.9 or 2.0 is better for a Miata. You can get impressive numbers from the little VW turbo diesel with basic upgrades and a tune. And because it's a lightweight diesel the TDI wouldn't effect handling as much as an OM606, or require suspension upgrades. Edit, might be too tall for hood clearance though
It comes from tractor pulling, it's considered a sign of high power and torque. In other cases it's way to spool TOO BIG TURBO for engine. In reality it is bad for a engine, economy and car emission test.
Diesel a/f mixture is always lean, only way to increase power is to put as much fuel as possible in the engine, and boost to burn it. The black smoke is unburnt fuel that you shove in the engine while turbo isnt spooled up
HI, I NEED YOUR HELP, I HAVE ONE OLD W124 250D, ENGINE IS OM602 STOCK, WITHOUT TURBO. MY MERC IS VERY SPECIAL FROM TWO REASONS, FIRST HE IS A 1 OF THE 100 SPECIAL MODELS, WHO MADE FOR 100 YEARS OF MERCEDES BENZ, THESE 100 MODELS WERE HAND MADE WITH SPECIAL QUALITY BOOSTS IN ALL SEGMENTS. AND SECOND IS THAT MY MERC IS IN A VERY VERY GOOD CONDITIONS, WE HAVE 700.000 KM FOR 31 YEARS, WITHOUT ANY WORKS ON ENGINE, GEARBOX AND DIFFERENTIAL. ENGINE AND GERBOX HAVE NEVER OPENED, ALL IS IN FACTORY STATE. MERCEDES MUSEUM IN STUTTGART OFFERED ME 10.000 EUROS FOR HIM BUT I NOT CRAZY TO ACCEPT IT. MY QUESTION IS, IT IS POSSIBLE TO MADE SUPER TURBO DIESEL FROM MY W124, I KNOW IT IS, BUT WITH MANY MODIFICATIONS. I HAVE PLANS TO ENGINE TREATMENT, AND TOTALY REPAIR ENGINE. AND WHEN I ALREADY DO IT, WHY NOT MAKE SMALL SUPER TURBO, WHEN I MEAN SMALL I MEAN UNDER 300 HORSEPOWER. I KNOW VERY VERY MUCH ABOUT STOCK OM602 BUT TO SMALL ABOUT MAKING SUPER TURBO DIESEL, AND ONE THING MORE, I DONT WANT TO DESTROY OR BURN ENGINE AFTER 100.000 KM, I WANT SOMETHING POWERFULL BUT HEALTHY FOR ENGINE AND WHAT IS POSSIBLE MORE FUEL AND OIL ECONOMICAL. THANK YOU!
Now Use the Translator. Das ist nicht möglich. Der 250D hat keine Natriumgefüllten Ventile sowie Kolbenbodenkühlung. Die Bohrungen für das Öl im Block und Kopf sind komplett anders. Damit will ich sagen, das klappt nicht! Das einzige was du tun kannst ist einen OM602A bzw Om603A ein zu bauen. Zu beachten ist auch das du ein anderes Getriebe bei den Turbo Motoren brauchst.
DieselPumpUK do you think it would be possible for you to do a video showing how to install 8mm elements in a stock pump. I've seen that you sell them and wondered what it would take to build one.
If we ask nicely will you put one of these in the Club 86 Land Rover 90? :)
I'm in love with this car, subbed. Great channel
Hi over there, DPUK. Any love for the OM603?
I haveno idea what im getting into, so im just gonna ask: would this kit (plus a rebuilt fuel pump) be ALL I would need to go on a 1999 w210 om606? Would I need a different trans? Bigger intercooler? It currently has a 3" turbo back straightpipe, but that is it.
You should have named your dog Diesel!
or Vin.....
Or
Rudolf Diesel
The German inventor of the Diesel engine 😂
What pump, and element is on this om606. Assuming a 603 pump and 7.5mm elements
Hej i‘m from Austria and i like your videos with the om 606 :)))
I have a 320 cdi om 613.
I want to put on the high Pressure Pump from the 400 cdi and the Injektors from c30 Cdi.
And a Holset hx52 turbocharger.
What do you think about this?
hello, do you think that the HX35 is appropriate for OM603 ?
could do tune on a w140 deisel
Why is the air filter and primary intake under the hood sucking all that hot air into the turbo? You will get more power if you reduce the air temp going into the turbo. It's all about air density. The cooler temp the better. Put a shield around the air filter to isolate it from the under hood air. Have the shield go to the front of the grill and get clean cooler air....do not place t behind the radiator. You will get more power every time.
Ron Coleman I'm glad you mentioned that otherwise I would have never known.......
DieselPumpUK wasn't trying to be flippin. Just an observation. Keep up the good work and great videos.
do you guys offer anything for the 717.450 manual transmission to take this kind of torque?
you need the 716 trans. the 717.460 would blow up also. they have adapter plates. which are bolt on. BMW boxes apparently are really good
Does this car have a mechanical pump? And is there a way to get low to no black Smoke out of the exhaust?
will this fit in a naturally aspirated om606 without issues
What is price of self installed budget turbo kit, thanks
Can you fit an OM 606 into a W204 2009 estate? Only issue is current motor is a 1.6 ( C180 Blueeficiency):))) I guess I need to sell it and grab a 2000 something E class Diesel with problems.
In your opinion the om612 and 613 engines are still tuneable as the 605 and 606?
Does this kit would work on and om601 ? Thanks 😊
How budget is "budget"?
iwanna know 2
ThaDutchDK1989 995€ or something.
It's exactly "a small amount of money" haha
That is extremely cheap for this kind of setup
Was this car turbo charged before hand? I’ve just bought a 300e non turbo with the idea of boosting it for use as a daily
Are om603 any good and do you guys sell upgrades for them? Only ask if I'm on a budget and here in usa only way to get that engine is buying an old 300sdl and the om606 came on a later chassi e class only.
clean as fuck that wagon
Do you need to upgrade the pump or you just throw the turbo kit on ?
AlexTT mechanical pump conversion and turbo kit
many many wants. first I need to engine swap my w124 wagon though... hmmm
What will be the price for this budget kit?
TomasKayn that's what I want to know! Tell us DPUK !
That 363hp still at the pumps 48-140 delivery ?
Samuel Yull ,yes 140cc is a little high for that bhp but its no problem.
DieselPumpUK
Have much for this engine build and what's the max horsepower for an automatic box on such a thing. Cheers.
Ball park price?
Guys, will there be a budget kit for the OM605? Mine is stock at the moment and Auto, so would the box take the torque and power? Pump swap would need to be done as well, by you guys though.
H Singh me also have om605 did you got answer or still waiting
No answer yet mate, I will call them tomorrow to ask...
Its the same engine, only 1 Cylinder is " missing".
I have the same question. Have a W201 with the OM605 on an automatic transmission. Could someone answer about how the 5cylinder Turbo diesel parts from a early Ssang Young 2.9 fit to make my non turbo diesel going turbo?
Do you offer a kit for gasoline models?
Go visit turbobandit for gasoline engine turbo kits ;)
dream car
Will any of the OM series fit in an NB Miata..? I want to build a 606 superturbo but I'm not sure it'll fit in an MX-5 🙃🙃🙃
thejewwhale because of how light the Mazda is and how heavy the om606 is, you'll probably never go in a straight line again...
Also you can make anything fit anything, depends how much you're willing to have out of the bonnet/hood and how much room you need to use the pedals!
thejewwhale try an om601 or a 604. both are 4 cyl. anything more than that, and it's major fabrication time. to swap the engine's I'm telling you to, you'll already have to fabricate a little. hope you know someone who can weld. let me know if you do this. I'd love to see it happen.
I think a VW TDI 1.9 or 2.0 is better for a Miata. You can get impressive numbers from the little VW turbo diesel with basic upgrades and a tune. And because it's a lightweight diesel the TDI wouldn't effect handling as much as an OM606, or require suspension upgrades.
Edit, might be too tall for hood clearance though
Do you only do turbos for diesels ?
I don't hate diesels but why people love so much smoke from exhaust?
It comes from tractor pulling, it's considered a sign of high power and torque. In other cases it's way to spool TOO BIG TURBO for engine. In reality it is bad for a engine, economy and car emission test.
Antti Heikkinen Thank you
Diesel a/f mixture is always lean, only way to increase power is to put as much fuel as possible in the engine, and boost to burn it. The black smoke is unburnt fuel that you shove in the engine while turbo isnt spooled up
the steering wheel on the wrong side .. all its a fake. Hehe
HI, I NEED YOUR HELP, I HAVE ONE OLD W124 250D, ENGINE IS OM602 STOCK, WITHOUT TURBO.
MY MERC IS VERY SPECIAL FROM TWO REASONS, FIRST HE IS A 1 OF THE 100 SPECIAL MODELS, WHO MADE FOR 100 YEARS OF MERCEDES BENZ, THESE 100 MODELS WERE HAND MADE WITH SPECIAL QUALITY BOOSTS IN ALL SEGMENTS.
AND SECOND IS THAT MY MERC IS IN A VERY VERY GOOD CONDITIONS, WE HAVE 700.000 KM FOR 31 YEARS, WITHOUT ANY WORKS ON ENGINE, GEARBOX AND DIFFERENTIAL. ENGINE AND GERBOX HAVE NEVER OPENED, ALL IS IN FACTORY STATE.
MERCEDES MUSEUM IN STUTTGART OFFERED ME 10.000 EUROS FOR HIM BUT I NOT CRAZY TO ACCEPT IT.
MY QUESTION IS, IT IS POSSIBLE TO MADE SUPER TURBO DIESEL FROM MY W124, I KNOW IT IS, BUT WITH MANY MODIFICATIONS. I HAVE PLANS TO ENGINE TREATMENT, AND TOTALY REPAIR ENGINE. AND WHEN I ALREADY DO IT, WHY NOT MAKE SMALL SUPER TURBO, WHEN I MEAN SMALL I MEAN UNDER 300 HORSEPOWER.
I KNOW VERY VERY MUCH ABOUT STOCK OM602 BUT TO SMALL ABOUT MAKING SUPER TURBO DIESEL, AND ONE THING MORE, I DONT WANT TO DESTROY OR BURN ENGINE AFTER 100.000 KM, I WANT SOMETHING POWERFULL BUT HEALTHY FOR ENGINE AND WHAT IS POSSIBLE MORE FUEL AND OIL ECONOMICAL.
THANK YOU!
Now Use the Translator.
Das ist nicht möglich. Der 250D hat keine Natriumgefüllten Ventile sowie Kolbenbodenkühlung. Die Bohrungen für das Öl im Block und Kopf sind komplett anders. Damit will ich sagen, das klappt nicht!
Das einzige was du tun kannst ist einen OM602A bzw Om603A ein zu bauen.
Zu beachten ist auch das du ein anderes Getriebe bei den Turbo Motoren brauchst.
Vexa Sketpro my e300d has more miles then yours. Tell them I'll sell mine to the museum for 10000 euros