Brilliant presentation, thank you very much for posting. My passenger side wiper stopped working but I can move the arm freely, no resistance at all so that is broken linkage for sure and looks like will be a reasonably straightforward fix thanks to your video.
I have a buzzing noise that I hear only when I am between 80-120 km/h that goes away when I operate the blades or when I lift up the driver's side wiper arm. Could be something in the linkage system causing this?
Thank you for your kind words. The timing belt is scheduled to be replaced in about 10 months from now. Video shooting the timing belt replacement is on my list.
@@ThanassisGritsopoulos maybe you can give me little advice , on my alfa GT i will soon be replacing both drive shaft.i noticed originally on right side of the old drive shaft, there is a weight balancer, which is not on new parts, will this be a issiue? I was thinking maybe i can take off the old weight balancer and put it on the new one, or just drive to a garage so they can do proper wheel alignment and check out if it's necessary to put a weight balancer or not. Any advice? Thank you beforehand
@@sanelb1147 As long as the new driveshafts are new and original, you don't have to worry. The driveshaft balance is rubber and molded to the driveshaft therefore removing it will surely damage it. The wheel alignment shop is dealing with the wheels and not the driveshafts. The driveshaft is balanced during production and maybe companies specializing in prop-shaft balancing services can probably do it for you.
@@ThanassisGritsopoulos i have brought the following drive shaft for both left and right. www.vsm.skf.com/mt/en/products/VKJC1800 Since on the webshop i brought it from it mantioned that it's both for left and right. Now I am little bit worried if this is the truth or not,cause maybe it is necessary to have the weight balancer on one side
Καλησπέρα και συγχαρητήρια για τα βίντεο που ανεβάζεις.Θα δείξεις μήπως μελλοντικα αντικατάσταση των silent block της εμπρόσθιας αντιστρεπτικής; (Η΄ και της πίσω)
Thank you very much for your comments. For the non Greek speaking audience, a video dedicated to sway bar bushes replacement is scheduled to be filmed when replacement time comes. For the time being, the bushes are just fine.
Dziękuję ,właśnie wymieniłem sam mechanizm dzięki Tobie .pozdrawiam z Polski.
Brilliant presentation, thank you very much for posting. My passenger side wiper stopped working but I can move the arm freely, no resistance at all so that is broken linkage for sure and looks like will be a reasonably straightforward fix thanks to your video.
Thank you for this upload. It was really helpful while replacing wiper linkage in my Alfa 147.
Best regards :)
Thank you thank you for this very helpful video sir im gonna fix mine right away
I have a buzzing noise that I hear only when I am between 80-120 km/h that goes away when I operate the blades or when I lift up the driver's side wiper arm. Could be something in the linkage system causing this?
thanks a lot,, learning a lot from your videos.. do u have a video of replacing distribution belt?
Thank you for your kind words. The timing belt is scheduled to be replaced in about 10 months from now.
Video shooting the timing belt replacement is on my list.
@@ThanassisGritsopoulos maybe you can give me little advice , on my alfa GT i will soon be replacing both drive shaft.i noticed originally on right side of the old drive shaft, there is a weight balancer, which is not on new parts, will this be a issiue? I was thinking maybe i can take off the old weight balancer and put it on the new one, or just drive to a garage so they can do proper wheel alignment and check out if it's necessary to put a weight balancer or not. Any advice? Thank you beforehand
@@sanelb1147 As long as the new driveshafts are new and original, you don't have to worry. The driveshaft balance is rubber and molded to the driveshaft therefore removing it will surely damage it.
The wheel alignment shop is dealing with the wheels and not the driveshafts. The driveshaft is balanced during production and maybe companies specializing in prop-shaft balancing services can probably do it for you.
@@ThanassisGritsopoulos i have brought the following drive shaft for both left and right. www.vsm.skf.com/mt/en/products/VKJC1800
Since on the webshop i brought it from it mantioned that it's both for left and right. Now I am little bit worried if this is the truth or not,cause maybe it is necessary to have the weight balancer on one side
Hello. Very nice video, I don't seem to find the linkage for the GT selling anywhere. Can you help?
Alfa 147 and Alfa GT linkages are common parts.
@@ThanassisGritsopoulos can you indicate a site where to find the linkages?
You can check on eBay!
my car puts the wipers down first, rather than going up. and can't seem to fix it. how do you fix/avoid this issue
It appears to be the motor spindle being out of position.
Where did you buy the new wiper linkage from and how much was it? Thanks for the videos.
You may contact www.alfa-restoration.co.uk and they will give you more information.
@@ThanassisGritsopoulos Thanks!
That website never even replied to my enquiry. Do you another place that sells them?
Please make sure to send them an email. They reply quickly.
I did, they never replied.
Καλησπέρα και συγχαρητήρια για τα βίντεο που ανεβάζεις.Θα δείξεις μήπως μελλοντικα αντικατάσταση των silent block της εμπρόσθιας αντιστρεπτικής; (Η΄ και της πίσω)
Thank you very much for your comments. For the non Greek speaking audience, a video dedicated to sway bar bushes replacement is scheduled to be filmed when replacement time comes. For the time being, the bushes are just fine.
Thanks I own an Alfa 147 with 425.000 km and I have to remove the windscreen stoper.
Μα στο τέλος τι έγινε και άρχισες τα γαλλικά;
The end of the video shows the wiper arms fouling each other. This was done due to wrongly aligned arms during installation.
@@ThanassisGritsopoulos ok thanks for your videos and the experience shared.