Hi, I commented in other video about the issue I'm currently facing, the X5 8 cil, 4.8 , just cranks but wong start, codes are A03B starter motor terminal 50, 2EFE fan activation and 2F44 preventive maniuplation (i tried to turn it on adding some starter liquid on throttle body, without success). I started as follows: when turn it on, it starts but just accelerating it turns off, tried again and the same happened, later it definitively won't start. I checked the fuse box , some rust on it, removed it , cleaned it and reinstalled and nothing, the issue remains. I remember in the past my jeep wont start, just cracks and the failure was the crank sensor. Do you think the failure could be the crank sensor as well.
Hello Best Car Fixes, I have a 2010 BMW X5 E70 3.0 X-DRIVE N52 engine (formally named the 3.0si), that I bought from a guy who couldn't get the car running again after replacing theME. It appears that water was getting into the housing which flooded the DME etc. Before I get in to restoring this vehicle I noticed that the harness plugs has heavy corrosion on them (I will clean or replace them). In that being said what is your opinion to get this engine to fire up. He replaced the DME, and to start X5 and it fired up and quickly died with a clunking sound from the engine. Finally, my guess would be to pair a new DME, CAS, Immobilizer, and foot well modules to see if I can get this car to start. Thanks for your assistance and help. Sincerely, ShawnRamone
Hello. Follow the steps. 1. Scan and delete the code 2F44 from the DME. 2. Then go to immobi.... scan CAS. And delete. 3. Allign DME, CAS, Stater interlock
আমি একটা গাড়ির নতুন চাবি প্রোগ্রাম করেছি, গাড়ি স্টাট হয় সবকিছুই ঠিক আছে, কিন্তু? 2F45 এই কোড দেখাচ্ছে কি করতে পারি আমি? আমাকে একটু সাহায্যে করবেন প্লিজ?
الله يبارك فيك و يرحم والديك على مجهوداتك
امين واياك
Well done 👏
What kind of program or scanner are you using here
Great video
Thanks
Glad you liked it!
Hi, How do I go about lining DME and CAS using the IM 508 after I added the key and it cranks but not starting? Cheers.
My friend can I do this witch any other scanner I’m having this issue and have aural scanner
Hi, I commented in other video about the issue I'm currently facing, the X5 8 cil, 4.8 , just cranks but wong start, codes are A03B starter motor terminal 50, 2EFE fan activation and 2F44 preventive maniuplation (i tried to turn it on adding some starter liquid on throttle body, without success). I started as follows: when turn it on, it starts but just accelerating it turns off, tried again and the same happened, later it definitively won't start. I checked the fuse box , some rust on it, removed it , cleaned it and reinstalled and nothing, the issue remains. I remember in the past my jeep wont start, just cracks and the failure was the crank sensor. Do you think the failure could be the crank sensor as well.
Yes complet and fixed the problem.
Hello Best Car Fixes, I have a 2010 BMW X5 E70 3.0 X-DRIVE N52 engine (formally named the 3.0si), that I bought from a guy who couldn't get the car running again after replacing theME. It appears that water was getting into the housing which flooded the DME etc. Before I get in to restoring this vehicle I noticed that the harness plugs has heavy corrosion on them (I will clean or replace them). In that being said what is your opinion to get this engine to fire up. He replaced the DME, and to start X5 and it fired up and quickly died with a clunking sound from the engine. Finally, my guess would be to pair a new DME, CAS, Immobilizer, and foot well modules to see if I can get this car to start. Thanks for your assistance and help. Sincerely, ShawnRamone
You welcome
Can u do the same on a 01 530 the security pop up after replacing battery
Im not sure
Put camera on it so we can see
Hello. Follow the steps.
1. Scan and delete the code 2F44 from the DME.
2. Then go to immobi.... scan CAS. And delete.
3. Allign DME, CAS, Stater interlock
মাশাআল্লাহ
ধন্যবাদ
আমি একটা গাড়ির নতুন চাবি প্রোগ্রাম করেছি, গাড়ি স্টাট হয় সবকিছুই ঠিক আছে,
কিন্তু? 2F45 এই কোড দেখাচ্ছে কি করতে পারি আমি?
আমাকে একটু সাহায্যে করবেন প্লিজ?
i think it'ii be great if you finish the process WITH ACTUAL fixed!!!!!
شغل جميل
الله يديك العفافيه
انت امعلم في bmw
الله يرضى عليك
حاول تشرح بالعربي
Gteat
thank you
ΤΑ ΠΑΤΗΣΕΣ ΟΛΑ ΤΑ ΚΟΥΜΠΙΑ ΚΑΙ ΔΟΥΛΕΙΑ ΔΕΝ ΕΚΑΝΕΣ. ΤΙ ΜΑΣ ΤΡΩΣ ΤΣΑΜΠΑ ΤΟΝ ΧΡΟΝΟ???
بحثت على حسابك في الفيس بوك بس مالقيته
ممكن نتواصل مع حضرتك وانا شاكر تعاونك