Dear iFlight here is the review as promised | Chimera 7 Pro O3
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- Get your 107 today! use code dobo at checkout to save
pilotinstitute.com/course/par...
🍺 JOIN THE BREW CREW TO GET ACCESS TO PERKS: 🍺
/ @originaldobo
==========================================
New Merch Store!!!!!!
teespring.com/stores/flight-a...
==========================================
📦 WANT TO SHIP ME SOMETHING? 📦
==========================================
Shipping Address:
Attention: originaldobo
P.o Box 3629
Springhill, Fl. 34611
==========================================
♪♪ Like the Music? Hit the link and checkout Artlist the provider of all the tracks you here on the channel. bit.ly/2A3sLYN ♪♪
👕 Buy all my merch "basically just a shirt but its super posh!" teespring.com/stores/flight-a... 👕
My Latest Gear Here: www.amazon.com/shop/originaldobo
Official Brand Partner: www.Drone-Works.com
SOCIAL
==========================================
🐦 Twitter - / originaldobo
📸 Instagram - / originaldobo
👥 Facebook - / originaldobo
🎧 Podcast/Live Show - / @flighttimecast
==========================================
📅 Upcoming events vist www.OriginaldoBo.com 📅
🔥 Like what I do? Consider buying me a coffee ☕
www.buymeacoffee.com/Original...
👇People keep asking so here is the most current gear I use👇
📷 NEW CAMERA SETUP 📷
📷 Sony A7IV amzn.to/3MhxPc1 A-Cam
📷 Sony FX3 amzn.to/3M0KDmU B-Cam
📷 Sony A7iii - amzn.to/35DCu5h Real Estate Photo Camera
🎥 Tamron 17-28 amzn.to/3Lemyb7
🎥 Tamron 28-75 amzn.to/3M8V8Vm
🎤 Mic In Studio - amzn.to/38fUnpW
🎤 Mic out doors - amzn.to/2qu7pim
🎤 Lav Mic amzn.to/3sqIBEB
"OLD CAMERAS"
📷 Panasonic S5 amzn.to/39F2ilA
📷 Sony A6600 amzn.to/2ZJ2kkF
🎥 Other Lenses: 🎥
🛒 Sony 14mm F1.8 amzn.to/3yoomvj
🛒 Sony 12-24 F4 amzn.to/395gG6s
🛒 Sony 16-35 F4 amzn.to/3L0pasS
🎤 Audio: 🎤
🛒 Audio-Technica AT875R Shotgun Mic - amzn.to/38fUnpW
🛒 Rode Wireless Go - amzn.to/2qu7pim
🛒 Deity VLav - amzn.to/2Pl92aI
🛒 Rode VideoMicro - amzn.to/2QuQi7z
🛒 Takstar SG598 - amzn.to/2xY3LOl
🛒 Zoom H1 - amzn.to/2OwH6lQ
🔭 Camera Accessories: 🔭
🛒 DJI RSC-2 Gimbal - drone-works.com/dji-rsc-2-3-a...
🛒 Benro Mach3 4 Series Tripod - amzn.to/3c0AqFP
🛒 Benro 3-Way Gear head - amzn.to/3iAEpLB
🛒 FocusFoto P50 Quick Release - amzn.to/2RvhmWK
🛒 Godox AD200 Flash - amzn.to/2ZEfZJC
🛒 Godox AD-S2 Standard Reflector - amzn.to/3km1qTc
🛒 Godox AD400 Pro amzn.to/3kY36Ve
🚁 Drones I use: 🚁
🛒 Mavic 3 - amzn.to/3MejjRW My Daily Flyer
🛒 Autel Evo Lite - amzn.to/3FuUuPr Backup Drone
🛒 Autel EVO - amzn.to/3spNsGp
🛒 DJI FPV Drone - amzn.to/3N35vKb Most Fun Drone
****************************************************
# # # # #originaldobo #stayoriginal
****************************************************
** All video and audio content created by myself and or used with permission from the creator.
** Affiliate disclaimer: some of the above links maybe affiliate links, which may generate me a sales commission. For example, my TH-cam Gear listed above is in association with the Amazon affiliate program and I’m an amazon associate ** - วิทยาศาสตร์และเทคโนโลยี
The same happened to me last week with a brand new iFlight Nazgul Evoque v2 O3.
The drone was right in front of me (100 to 200m away), doing a backflip and this was about 8 mins into the flight. Total blackout the moment the drone started the flip and crashed.
Switching out the stack to something with a BEC with 10v 3amps.
8 mins flight time with the O3 unit am i missing something? What battery gave this flight time? I have a 6s 1400mah lipo and i am getting 5 minutes most 6 flight time with no freestyle!!
@@panosfpv Ah sorry it's 0:59 into the flight when the drone crashed.
what controller were you using?
@@BrunoParnell DJI FPV controller 2
@@SteveTan86 seems the issue is iflight antennas are in the 5.6ghz band and RC2 is 2.4ghz.
If the GPS was your only redundancy with a brand new system, it’s a real eggs in one basket to fly it over water without a lock.
I took a shot over water, least amount of damage should it go down. It sucks but it’s the safest
I flown chimera 7 pro with air unit 1 and nazgul with vista for about 1 year with cf. never had han problem with it. Always super confident flying these
Thanks Ken, i had issues with them but we finally got it figured out. Took two months but it works.
Happy New Year
But the issue with the RC2 and the o3 is known already longer time. This is why we suggest to use another rc like ELRS or CRSF.
The issue can be fixed since 10 months back by disallowing piggyback.
Video was shared on facebook, this was my comment. only fair to post it here for full transparency as well.
As an Accredited Soccer Referee I am in the best position to adjudicate on this matter. Thus I will be "VAR" for this one!
1) It seems that in Betaflight under Failsafe, "Allow Arming without Fix" was enabled. This means if you arm prior to obtaining the minimum satellites, usually 6, GPS rescue will not be available.
= If iFlight ship the Chimera 7 with this on by default, there is fault here that the pilot should not have been allowed to take off without first obtaining GPS lock. However if iFlight do ship with this disabled (as it should be) then if the pilot disabled this, the pilot is at fault.
= The Reviewer is experienced as a pilot and is thus flying where in the event of video or radio failsafe could not walk and pick up the quad, the pilot should not be taking off without awaiting GPS fix, and by doing so assumes the risk that if shit goes bad, they're at fault
= The Pilots stated reason for taking off without allowing satellites to lock is he didn't want the O3 Air Unit to overheat. If iFlight ship the Chimera 7 whereby the GPS is powered from USB, being an experienced pilot he would know to power the GPS via USB for 5 to 10 minutes prior to plugging in a lipo to 'cold boot' the GPS so that a 'warm boot' can occur with a lipo to quickly find satellites.
2) As for the matter of the Video shutting down which causes the RC link to drop. We don't know for certain the cause of this however it would appear to be a 'brown-out' however where the O3 air unit couldn't receive enough power from the FC.
= Given that at the furthest point the video was working and the brown-out occurred at close range, it seems unlikely that the O3 Air Unit would have needed more amp draw at a closer distance to the pilot than at a further distance. It is not determined whether the brown-out occurred at the flight controller or at the air-unit.
The manufactuer providing regulated power to the O3 Air unit is in good faith to ensure the longevity of the air unit itself, however, by doing so, acts as a service provider for power delivery and must accept that if there are issues with the service, then they are at risk.
It is recommended that as the O3 air unit can take up to 6S, it should be powered from VBAT and not through a BEC on the FC. Potentially manufacturers need to release o3 specific FC's which have VBAT passthrough with built-in capacitance in order to ensure the O3 air unit can receive the required power.
Who is exactly at fault here, we will never know for certain, but in this instance, both parties have faults in their own actions and are not blameless.
I take ownership for arming and flying across the lake with no fail safe, my argument with them is mostly about the email interactions asking me to install and pull from my other functioning equipment. In the video I said its the best out of the box experience how ever customer service was lack luster.
@@OriginaldoBo except the perception you've created from this entire video is "fuck Flight they cost me a drone they're in the wrong"
The video could have been "I lost a $600 Drone in a swamp" but its not.
I agree their service can leave a lot to be desired
I didn't know referees had to have an MBA; excellent analysis. And @OriginaldoBo, your sacrifice does not go unnoticed, you did the do-nots, so we don't have to! 😆
Thank you for this honest review!!! I have several airunits and a couple of 03s and i agree with you!!! Im looking to but a helion by iflight but i may wait and see some more reviews. I really appreciate your honesty amd dope review. Keepem coming!!
Brother Ken, I hear you loud and clear, I have 2 Chimera 7”ers and I just purchased the frames from them never the “Bind-n-Flies” just because I just don’t trust ANY company to give them my money to build a “Bind-n-Fly” for me especially since I’ll be putting a GoPro and custom Li-on battery on it. So far I haven’t had any issues with them. I also never use DJI. I only use DJI products for “Camera Class” drones because I have a mini 2 and a mini 3 but other than that for my freestyle or long range I never use DJI, I always use Analog. It just always works for me. I haven’t dealt with Iflights customer care nor do I want to or care too. Love your honest and straight forward reviews.👍👍👍💯💯💯
Good honest review Ken. Happy New Year to you and your family.
Thanks for that Ken. It is great to hear your honest review and to see you got another after I talked with you about the fail from the original one you received.
This is one I am seriously looking at. I don’t have a crossfire remote. Is there one you would recommend to get with that?
I also liked your fix to try to stop brownouts. Thanks again for the honest review
Love your reviews!!!! Thank you 🙏. I been there before and your right some of these reviewers cover for these companies. Good on you sir no bs.
hahaha love the3 ending! I appreciate the no BS honesty. I was so close to buying the Chimera 7 pro and your experience made me change my mind. Cheers!
Nice review, and love the message at the end. Had a similar interaction as a consumer with GEPRC.
That's why I love your videos.. honest and no BS.. I also just got that same 7" . i was thinking of putting a Diatone stack or more the air unit power . running ELRS but question on the air unit rewire, did you just wire the pos & neg wire from 03 air unit to the battery leads on esc?
Yup, same way we've been doing vistas for years 👍
Thanks for sharing your experience. I too stopped using the DJI Controller 2 (gray one) after seeing some really weird behavior through my own testing. I've been running my DJI air units off vbat for the last 3 years after running a battery too low and having the regulator on the flight controller cut off and the quad crash as a result.
which controller are you using now?
@@robzspeedn Tango 2 Pro that I modified to include an internal ELRS module. Best of both worlds.
Sick studio. Thanks for the review! I built my 7 inch long range using speedybee f7 stack. I’m not too thrilled with my air unit/dji goggles v1 performance even with 1200mw output. I’ve even tried upgrading my quad antennas and goggle antennas and the problem persists. I was looking into a pre built to resolve this problem but tbh it seems they mainly have the same issues and inconsistency. lol it’s all part of the game!
Well, that was about as forward and honest as I've ever seen you! Hold em accountable bro, it needs to be done! Also, good point on not running video and rc link off the same unit, never thought of that! 👍🏼🤙🏼 Happy New Year!
Thanks for the honest input! Unbiased and objective. In conclusion, is it better to get the Chimera 7 Pro V2 RTF as a set inclusive of the Goggles2 and the ELRS commander 8 instead of using the DJI RC2 as the transmitter?
Thanks!
Thanks for this great review.
Would you mind sharing how to re-wire the air unit directly to the battery?
hey man, thanks for such an honest review. This really helps someone like me being interested in this drone and gives a bit more understanding about the company
Yes!!! Thank you for your honesty!!!
Subscribed because you're straight up with reviews. I WAS looking at this quad. Thank you.
Cheers Ken for the review! and hats off for the honesty on this. I wonder if the original AU is also drawing that much power, and would you suggest a similar solution? ( I assume that would need a separate BEC, since the OG air units are only 4S capable.)
it's a known DJI issue, not iFlight's fault
Input Voltage 7.4-26.4 V for the O3, so capable of getting power from 2 up to 6s
amen man! I recently put out a video on some tips for people getting into the O3 system and I recommended BEC amp ratings for different voltages at about 30% over what it actually needs...got questioned on it a little bit too. I don't trust the rating, ever, lol. You have to have the head room above the requirement to take an inaccurate rating into account and the reduced load capacity as they get hot. I also said that nobody should be using the DJI RC link for their builds, which kinda pissed in some Cheerios, lol. Always appreciate your honestly bro!
Coming into 2023 with a bang, happy new year. Thank you for the honesty. I like Xing motors, but maybe because I havnt had to deal with their customer service yet...?
I wonder if you are not using the DJI FVP RC, if the powerdraw will be lower? Since 2.4Ghz RX is shutdown. Would you also mind showing somewhere a picture what you soldered where? Im receving the O3 Iflight nazgul Evoque tomorrow normally.
Thanks for sharing your experience, Ken.
Watch a lot of drone reviews lately. You’re the only one I subscribed too. Appreciate the honesty 😂 especially at the end of the video 😂 👍
Hey man, have you got any videos or recommendations on the best bind and fly 5inch running the O3? I’m coming from DJI FPV and been putting it off but really want to make the move to something more serious.
big respect to you as the only non-mercenary TH-camr. When you watch Captain Drone everything is always perfect 😂
Hey! I greatly appreciate your candid reviews! A year ago I was all "iFlight This! iFlight That!" I was going to spend thousands of $ on their drones. Well, I bought their ProTec 35. I was disappointed with how easily it would disconnect and drop to the ground if you flew very slowly around a tree. I've flown my Walkera F210's for years and they never even hinted at a problem of this nature. So, I assumed iFlight would be the same. They are not. Then, I heard about you and the battle you're having with iFlight. I'm on YOUR SIDE! Keep up the good work brother!
lol, that has nothing to do with it being an Iflight built quad. Thats YOUR choice of receiver.
@@staymad7206 Then why is Ken having this problem.
@@billhowes5871 ...did you watch the video? Nothing related to Iflight build or components failed, he had his DJI RC link fail. That has nothing to do with Iflight, only poor choice of RX/TX and the bright idea to fly over water. DJI fixed this issue in their latest update, not that it matters. This isnt related to Iflight
Happy New Year's Ken your the go to guy !!
Thank you for this review. You never fail to give us the HONEST truth! I was considering this drone before the review. Not now, when I buy a complete product, I expected it to work like a complete product.
it's a known DJI issue, not iFlight's fault
I also use the Diatone Mamba MK4 F722 APP stack that you use and have had no issues so far with my O3. I would also like to add that my son was using an iFlight stack in is 5" with his Walksnail and it kept black screening. He has since changed his stack and has had no issues since changing. So something is wrong with iFlight stacks.
IFlight stacks have always been trash....reputation for failures and doa, and then similar customer support..they blame the user and waste time
I don't care so much about the drone itself but for your honest reviews! Thanks
Badass review, was wondering if this thing was to good to be true. New to the drone world. Where do I go if this isn’t the drone to get?
Happy New year with another sweet video to start the new year with. Makes me wonder if some of these companies are holding back with the true capabilities how they can truly perform. My example is with the newly released android fly app called "Maven Lite". For DJI pilots it offers capabilities some can only wish for. Been testing it from beta and it works pretty flawless. No geofencing is the one of the features not sure how their coders got around.
it's a known DJI issue, not iFlight's fault
I just got one of these and have only flew it twice on the second flight the osd froze is that a sign that I'm having a Bec issue should I direct solder the power wire like you did ?
thats O3 issue, factory malfunctioned O3 gives this type of problem and I too had same issue and talked with dji regarding this and sent some videos as proof and they agreed to take it back for inspection and they mostly would replace it. So you to might need to get a replacement for it. Whenever i plug into PC with usb c data cable the green light turns on for a second and then turns off, Sometimes while in flight O3 turns off automatically and drone falls to ground. this happens on random occasions.
Thanks for the video.
It's a very interesting and valid point you're making here (with regards to using crossfire vs. DJI link). As soon as I heard "I did not want the air unit to overheat while I'm on the ground" I thought to myself - I don't have to worry about that, as I have the Air unit power supply switchable from my transmitter via an Aux channel. I can (and usually do) keep the air unit OFF while waiting to GPS lock. That is one thing you can NOT do if you're using the DJI radio for control.
This has totally been fixed fyi. It was a DJI problem.
@@BeautyBeastRC Thanks, can the o3 air unit retain control link with VTX turned off?
@@rcfreakamit mad tech has a video on this where he does a deep dive into it. iirc if you lose video signal the rc2 signal switches after like 1 second. You should totally go find that video though. dji 03 rf deep dive or something like that.
Hey, can you elaborate how to make an air unit power supply switchable from transmitter via an aux channel?
@@sensivityable Hi, in the flight stack I'm using (hglrc-zeus-f722), the 9V regulator output can be controlled via 'USER1' mode in betaflight configurator modes tab. I'm using this power supply for the air-unit, and map one of the transmitter channels to control it. Matek fixed wing flight controllers have similar regulators (control defined in iNAV configurator). Not sure if this is available in Speedybee flight controllers. hope this helps.
props for saying what you think! that really matters
I feel like there's MUCH BETTER ways of testing new builds. Not sure why you decided flying without GPS was better than plugging in USB for a few minutes to get the cold boot out of the way before your test flight. Maybe didn't have the time? Maybe didn't know that was an option? Either way, I think since it's a BNF a little of it is on the fault of Iflight, yes. But you risking your own Gear like your bones is 100% on you. If you are so unsure about the build that you test it over water in case something goes wrong, I DEFINITELY wouldn't put something like a bones on top of it and send it over the water without failsafe setup. But that's just me.
Fail safe was set just didn’t lock
@@OriginaldoBo Well that's because you purposely didn't let it lock. Didn't you say in your video you purposely went in and disabled "no arm without sat lock" setting in BF? This I think was the first big mistake that lead you down this road where you ended up.
@@extremeboatdockingmedia well I would imagine a professional like Dobo would know how to do this....
@@extremeboatdockingmedia a professional of this caliber should. It’s the basics. This was very amateurish of him
I blame china
Sorry to hear about your experience. My personal history with I-Flight has been exceptional! The 5 BNF's I have purchased have been impressive quads and still fly today. I did have one problem with a 6S Nazgul although that I purchased that one through a third party and never involved I-Flight. My only experience so far with 03 is the Avata and I know it is not the same deal. I have decided moving forward with the 03's I will now use Express LRS and no longer use the DJI controller. I dislike the small gray controller anyway. Best of luck and thanks for the review and information!!
Yeah most my quads have tracer or crsf but when we’re reviewing we have to use what most newbies may feel comfortable in using essentially
@@OriginaldoBo I totally understand that. Thanks again!
Dude, i love you for this conclusion!
The same thing happened to my Chimera 7 but an older version. Instead of the FC, the ESC just popped in the maiden flight, crashed into the ocean but I managed to swim and get it. With you as well, they blamed it on user error. I showed them the popped FETs on the ESC but they replied that it happened in the water but couldn't explain the cause of the actual crash.
Iflight has earned it's reputation as the IFRIED of electronics and would never buy any of their electronics again.
Can anyone help? I cant find a video for this question. Would you recommend the Chimera 7 Pro O3 over the Nazgul Evoque F6 V2 6S HD if i was interested in long distances and longer air time? i i would be using the Commando 8 ELRS 868/915MHz RF 1000mW controller with the dji goggles 2. Appreciate the feed back
And what is your opinion about the v2 with 7.5 inches? Has this problem been solved there?
I think the problems have been addressed now
The end of the review is just...[chef's kiss] LMAO
Ken, Thanks for this (and all others) honest review. I just had an not-so-good customer service interaction with iFlight, regarding an FC problem. This was a brand new FC, purchased from a reputable supplier in the US, where iFlight refused to own the problem. Thankfully the supplier has stepped in to make things right. But, based upon your video, reading about CS issues and customer interactions and my issue, I will not be purchasing iFlight electronics.
I'm so glad i came across this video, i have exactly the same issue with the BOB57. 3 out of 5 batteries have resulted in a video freeze on the O3. Interestingly iFlight are claiming the issue is due to me adding an ELRS receiver even though it is connected via a JST plug and the SBUS receiver has been taped with electrical tape and fastened to the top of the O3. All of the freezes i have had have been at less than 100m range with full video and rx signal clearly shown in the DVR. To say i'm pissed off is an understatement as just like you it has cost me a Hero 11 on top of the unhelpful responses from iFlight.
I wouldn't send over water on a range test and not wait for gps lock to enable rth or rescue .
Nah I rather have it hit the water then someone else
Didn’t wait for gps. CHECK.
Standing sideways. CHECK.
Range test over lake. CHECK.
Gps had nothing to do with the air unit turning off… rang test over the results in the least amount of collateral damage to somebody else’s property or setting a field on fire. Should the aircraft go down
Need to blame someone for the fail-safe but the safety feature fitted by manufacture wasn't being used . Like having a car crash and not putting on your seatbelt then blaming the car manufacturer for your injury. Glad no1 was injured spose exactly why aviation authorities have their rules of flying over ppl and crowds etc it could happen at any time .
Hey, can someone please check whats the current from the Chimera 7 Pro V2 is before Arming? I have 1,7A before Arming. Seems a litte high or am i wrong? Thanks.
Well maybe it is dji I had the original air unit and had to take out the sd card because it would stop transmitting as soon you did a flip. Maybe the 03 does the same.
From the first day im using DJI digital, I'm always using external BEC for supply the Vtx power, not taking from the FC, especially O3 , they're very hunger of power, need at least 9V external BEC, its always sad to hear or see quad dissaper just like that..
Hey bro. My brand new Nazgul Evoque V2 just burst into flames for absolutely no reason? Only a few flights on the kwad with zero crashes or damage. Took off, came right back and landed cause my phone chirped and before I knew it.... POOF!! Is yhos a common issue cause I've herd quite a few similar stories? Thanks!!
great honest review, I was thinking about getting one.
I have the Googles 2 and have upgraded one of my old DJI Air units to the new firmware that allows compatibility between the new goggles and old Air unit. Currently I am using the grey DJI controller. This weekend was the first time I have been able to fly and test and noticed that when my 4s batteries got to just below 13v (13.9, no lower) the battery quickly would drain down to 12v causing my drone to completely shut off and drop out of the sky. When I say quick, we are talking 3-5 seconds. Another thing of note, when I would disconnect the battery from the drone and reconnect the voltage was reading in the 13.9 to 14.1 range for all batteries tested (odd huh). My first thought was "well my batteries are going bad" and I just so happened to have three brand new batteries still in the box. The next day I took out all three of these new batteries and I still noticed the issue but being a fresh battery and knowing this might happen I was quick to land the drone before it killed my brand-new batteries. Seeing other old Air unit users with the same problem along with new Air unit users as well. DJI needs to work out a few bugs apparently...... or my opinion is being swayed by my personal (and others) non controlled testing and assumptions :)
You should never fly lipo batteries below 3.5 Volt per cell otherwise you will be damaging them. One hint is that batteries voltage will drop drastically below 3,5 Volt. So for a 4s setup you should land at least at around 14 Volts, more would be better
Had exactly the same thing happen to me, but with ELRS - complete shutdown with no apparent reason and warning, unfortunately above the sea :/
I'm dead!😂 I subscribed to you just because of your ending outro, and I don't even fly fpv.
Would you change any of the electronics on any of the iflight stuff Ken? I saw your Evoque F5 video and remembered you saying that it flies great out of the box but say a year down the road is it that same experience. So this got me thinking, if you were to replace/build your own would you change everything or just certain parts?
It’s dead, ESC popped :/ I put a mamba stack in it
@@OriginaldoBo mambas rock!
Literally had the same thing happen today with my iFlight Nazgul Evoque v2 O3.
I have additional footage I can share of me going all around the bridge with no issues until the second flight where video completely shut off. I used my TX16S Crossfire to throw it into angle mode, engaged throttle, and engaged failsafe and the drone did not respond. Even though I was in line of sight, the video signal never recovered.
Why angle mode and failsafe did not work?
Lost my iflight BOB57 in norway the exactly the same way. Execpt I had GSP lock before taking off... :(
I have bought Chimera 7 pro V2 with O3 but I choose crossfire radiolink. How can i prevent this problem? I'm a little scary seeing this video!
Tis why I never fly over water. It’s just not necessary unless you want to risk total loss. Just don’t do it unless you can stomach losing your shit. Quads dropping is always possible it’s part of the hobby.
u should make a video on how to use gyroflow for O3 air unit videos
Should it not have lock gps during the flight either way.
Props to you Ken for actually giving us a no bs honest review of a product. Regardless of them sending it to you for free you still told us the end user how it is, what your experience was. Most won't and they don't as you know. So my hat goes off to you for your honesty sir.
This is the best done review video I've ever seen lol
This is why I love Ken. Probably just saved me well over $1,500 between getting this drone for my first long range, dropping $500 in batteries, $400 action cam etc etc. I’ll build my own long range thank you very much
it's a known DJI issue, not iFlight's fault
@@zeDoSauRus Is this a known DJI issue?
@@tonymorgan328 yes! They issued a update three days ago
Awesome and funny ending to this video 😁 and I totally understand your upset ....
I was thinking about buy this, due to the issue you had, I think I will find alternative, thanks for you review. I just bought the nazgul but I regret it, due to this review.
Just fly it and hope for the best
Thanks for the Review! I build some Chimera 7 by my own with DJI V1 System and these are my absolute favorite Kwads. The Pont with the Voltage regulater is good. But even with Crossfire as RC Link you have the same problem. The voltage regulater will create the 9V AND the 5V and when it is overheating the 5V will be down too....
Sorry for your Stuff man! That is not Ok. When you Build a RTF you should be responible for you Product in total. When a Tire on your new Car is flat at the first drive the Manufacturer will not blame the Company that will deliver the Tire.... They will help you out...
thanks for this review man! 😉
Appreciate the honesty.
I just purchased the iflight defender 25 , I'm still waiting. It was a pre-order 🤞🏾
Did you set only the PMW low to 48, or both low and high?
Low and high
Having the control link separate from the VTX is avoiding a single point of failure, it is not redundancy - which means falling back onto the DJI control link if crsf fails.
One of the fundamental issues with DJI RC link in general and additionally with many BNFs coming out.... You do not want to change the stock DJI antennas. The stock antennas are dual band 5.8 for video and 2.4 for link... 3rd party dual band antennas are hard to come by... If they change the stock antennas... they are most likely 5.8 only and can lead to loss of link/failsafe.... Additionally if you lose Video link you also lose control if using the DJI link... Use ELRS, GHOST, or CRSF for link...... Be safe yalll!
Reviewed this like a boss!🎉
I use the commando 8 with 900 mhz erls been flying it for last ,5 months.
Bardwell has a video reviewing the iflight AOS pre-built and it had a blackout on him. He didn't say anything about it.
Josh has a relationship with iflight, I don’t and typically buy their quads so I am free to say what I please
@@OriginaldoBo
That's why I appreciate the honest review.
My Evoque F6D I think overheated once over water. It blink off. Everything off goggles went black for fraction of a second. Drone twitch like it was about to fall out the sky and transmitter made sounds like it reconnected to drone.
I dodnt write iflight. Figure the plastic panel and 98° day. If I lost dji it just be goggles. If I lost just receiver it return to home. I tested rth every day I fly
Thank you for being honest! I ordered a MOZ7 from GepRC cause I was told that iFlight’s electronics have bad reputation! Hope my choice won’t disappoint me!
Thanks for the honest words.
And I was just about to order an O3 Nazgul Evoque in the hope of getting a really reliable quad. Damn...
DIY if you want reliable , or hire a professional to build it 👌
@@Fly_High_FPV There's a thought...
and avoid using dji trash in it.
@Асен Асенов the dji 03 camera system is the best on the market, the trash was iFlight's
@@Fly_High_FPV yeah, thats why DJI released a firwmare specifically to patch the very same problem shown in the video. I can agree that o3 is the best in the world, at causing crashes. Plus, reports show that the o3 uint in the chimera 7 is connected directly to vbat, so again, DJI = trash.
I like how you keep it 💯 with these reviews & companies 💪
GPS and RTH is very useful.
Absolutely it would’ve likely brought it back maybe into a tree, most of my quads do not have GPS on them. That doesn’t negate the interaction after the fact
Doing a range test over a lake lol lol Braver than I am I only fly over lakes after I have proven my stuff to work perfect lol
If it goes down you lose it and no damage to anything or anyone . It’s 1.5 pound done loaded
Great review and am glad to see your honesty about Iflight. The on board voltage regulators on pretty much every FC powering up DJI air units is a major no go and Iflight should have know this. They have an external voltage regulator they sell thats pretty good and should have just stuck with that.
Hell yeah those last few seconds were priceless
@originaldobo9269 I don't understand
So true man!
Captain Drones F6 V2 he reviewed did not have a voltage regulator. The DJI plug on the 20x20 Blitz FCs run VBAT. So to me it's looking like a DJI Remote 2 firmware issue.
Talked with Mads and he had the data. So did iflight they stated power loss from the logs
When you have video loss with DJI you'll also lose your r/c link due to some bug .. Madtech has a video about it
Ok, so... I am sure not everyone will agree with me but... Appreciate the honest review... Stay Original as always.. Oh and Happy New Year Mr.
2023 we are going to hold manufacturers responsible and those that represent them. I’m punching back! I’m not here to make friends with other creators. I’m going to be the mother f***ing anti hero this year.
Keeping it Real Ken 2023(KIRK) Thank you for all of your honesty this hobby already has enough yes men ! Happy New Year 🎊🎉🛸
One of the reasons i subbed to the channel, no BS attitude and you keep it real, my kind of people right here!
You need a cape with a big "K" on the back you anti-superhero. 🤣 And Cheen Yi Dah to all those who don't agree.
The "Deadpool " of the drone industry!
Hell yeah that’s what i like to hear 🔥🔥hold these companies accountable
Appreciate the heads up on this one. I would be upset to if it cost me $600.00 in hardware. Glad to see I’m not the only one who loves the GoPro Bones! My favorite FPV camera to date. Sorry, you know have to purchase a new one. Also..did enjoy the ending. 😂😂😂
Snagged a second hero 11 mini after this one hit the drink 😂
Wish they made a chimera frame without the sidepanels for a full 30x30 stack..
remove the panels......
I too am really pissed off with iflight I bought a Beast f7 STD and installing it is like pulling teeth.
The usb extension plug comes wired wrong. Then the plug pins bent and took ages to straighten.
The pinout can only be found by going to some obscure retailer website.
The main 8 pin connector is missing.
Honestly, compared to building with something like a beautiful matek fc with perfect screen printing it's a complete headache where you are constantly looking at pinouts checking the orientation of the board and the orientation of the plug.
Honesty, I only bought this board because I needed to save space for hdzero freestyle vtx in the stack on a longrange retrofit but I am regretting it now tbh.
No doubt I will never buy another fc that does not have perfect screen printing and no connectors.
Honesty is a bitch. Welcome to the club my buddy as a customer this is what we deal with. 👍 product but being in a different country who holds them accountable.................. keep up your Honest reviews 👍.
Is it possible to put an Insta360 ONE RS 1-Inch 360 (166g) on a Chimera7 Pro V2 6S HD (695g) with a Fullsend 6S 8000mAh Li-Ion battery (896g)?
Yeah
@@OriginaldoBo Ok thanks