Tips for cutting tree stumps - Echo CS680

Tips for cutting tree stumps - Echo CS680. Quick demonstration of how I cut tree stumps. The wedges are the key. If it's a bigger stump they make all the difference. I'll link below to some cheap ones.
amzn.to/3wqYJGu
Tree felling wedges
amzn.to/31IUCrj
Chainsaw chaps
As an Amazon affiliate I get a tiny commission if you order through my links. The price is the same regardles and I certainly appreciate your support!

[@mikerodriguez1044]

This is underated, as a stump grinder having to cut stumps down low this was well executed

[@tranger4579]

Great job thanks for sharing. I fell into the tree felling business by accident after cutting down an elderly neighbor's tree.

[@zoranradon9198]

Excellent show. One piece of advice, adjust the H lift towards a leaner mixture to make the chainsaw more powerful.

[@renee2005]

Thanks for sharing🥰

[@cheerry777]

Looked so easy....

[@DIAPERJOE]

I plunge the saw tip through the center and then cut both directions leaving a little at the edge. Then cut from the outside. That greatly reduces pinching but it’s hard on the saw to cut a stump flush no matter how you do it.

[@Billster1955]

What made you choose the 680 over the 620 or 7310? I need to purchase a big saw for my business. Trying to decide on which of the 3 I mentioned above to govwith.

[@fredmetcalf]

Cut with the top side of the bar and the sawdust will support the stump and it won't collapse on your saw........if I was milling I would war an 80 cc or bigger saw-----milling is a lot of work for any saw ......think of longevity....

[@darrensmith9407]

Most of us don't have 27 inch saws, would've been good if you could have cut the stump the hard way with a much smaller saw...good tips though 👍

[@hyzercreek]

If you have access to water or a garden hose you should hose all the dirt off to save the chain

[@v4na99]

Have you compared this saw with others in a similar cc range? Just looking at this saw for milling.

[@adamj8293]

I haven’t, sorry. If you’re milling I assume you’ll use a 24” bar? That’s some tough cutting but I’d say it should be plenty of power. Not sure how it would compare to a Stihl or Husky.

[@LiveFreeOrRIP]

I didnt know Steve Kerr had a youtube channel. You should show some 3 point shots or something.

[@hyzercreek]

1:08 did you just shovel dirt onto the chainsaw chain? LOL come on, man!

[@justingoodwyn3824]

I think that’s an axe handle.