2015 BMW 320i Oil Pan Gasket REPLACEMENT
ฝัง
- เผยแพร่เมื่อ 4 ม.ค. 2025
- To Watch the NEXT Video:
To Watch the PREVIOUS Video: • HOW TO: 2017 BMW X5 OI...
Hey guys in this video I will be showing you guys how to remove and replace an oil pan gasket on a 2015 BMW 320i. It's very similar to the other years so it can be helpful. I tried my best recording this, but I record alone and I don't have a very good tripod. I hope you guys enjoyed this video and leave any comments for anything that you guys want to see next or whatever you guys recommend, or ways you guys can help me out :) Thanks you guys and Happy New Year's Eve :)
Great job One of the best videos out there!
Wow, thanks!
Wow! People must really love these cars! I can definitely see the repairs costing more than the car is worth at a certain point and time. Good video. I've never owned one before. I considered getting one but definitely will not moving forward. 👍
6:05 was that a pice of the timing chain guides broken off inside of the oil pan😮
Not sure what you are looking at, but hopefully not lol. I doubt it, I always check whats in the oil pan if there is metal, or other stuff like gasket maker etc.
Great job! This same procedure would work on an n20 for a rear wheel drive 328i right?
They are pretty much all the same procedures but could vary slightly.
How you lined the subframe with the radiator mount up ?
Good stuff might as well add at 205 or just replace the motor mounts at the same time
Yeah true, but for the price that some of these parts may be, might be better to wait to get the most out of them.
Thanks for the helpful tips. Definitely a good idea to unbolt the transmission mounts when jacking up the center or rear of the transmission. I didn’t unbolt it and I tore both rear mounts
Yeah, get more clearance by unblocking the rear transmission mount.
Papi next time include the bolts size and torques spec
Will do thank you for your feedback!
Good job man. Keep it up. Thanks for shortcut. 👍
Thank you :)
Nice work man. Video really helps 😊
Thanks!
where do you put the 2 special bolts for the oil pan? i cant seem to find a diagram anywhere. think its number 2 and 3? cant seem to find a video or post with a exact position. thanks!
Which special bolts are you talking about?
@@houseofteks7474 i figured it out. thanks!
@@houseofteks7474 according to RealOEM (as well as FCPeuro) for my RWD F30 2013 328i, 2 of the rear(?) oil pan bolts are the same size but have blue sealant (EDIT: white sealant, I bought and installed them just in case) pre-applied to the threads. Supposedly this seals oil from leaking from 2 (of 22 screw holes) that are through-holes to the crank case.
It seems like most techs aren’t mentioning anything about this. Not sure if it’s even true. I looked at mine w/ a flash light and those holes seemed to bottom out like the others.
great job 🥳
hello, can you tell me which support you used on the engine to suspend it?
Its called an Engine Support Bar.
You can you the tow bar ,
Where is your mechanical workshop located?
Inland Empire, California.
Can this job done in 5 hour ? By a the bmw dealer?
Its a hell of a job.
Thanks !
👍🏼 damn good job
How long this take?
Thank you
how did you disconnect the steering?? i unbolted but it won’t slide off
Sometimes you got to tap on it with a hammer and prybar or a flat head. Same thing when installing. Try not to hit the cylinder part, hit the most solid part like where the bolt slides through.
Yeahhh i guess ill pay the shop $2k i aint doin all that
How much did you end up paying? I have tot sale mine in too for this
Yeah, sometimes its better to let the shop do it, they can take care of the headache, and you also avoid not breaking anything else.
Mechanic was charging $1100 for this job! Do u think that’s a fair price?
5hrs x $150/hr, $50 oil + filter, $30 oil pan screws, $25 oil pan seal, 8% tax = ~$920
It’s in the ball park range. Depends on parts costs, labor prices, which parts actually being replaced, etc.
Not too bad, it is a German vehicle at the end of the day, gets pretty expensive. I would say call the dealer and get a quote and go from there, it'll feel like a steal then. If its too cheap I would also be scared unless they normally work on German vehicles.
Cheaper than what I got quoted today at $2k
I was told 1600 for oil pan and hoses in Berkeley California
@@JasJasFreshi need mine changed, what shop was this. Im in California too.
That UTI hat tho lol
We all got to start somewhere to get somewhere.
@@houseofteks7474 went there too bro. Graduated 2017
Bro my toe hook doesn't even fit my engine or the whole that comes with it
Unfortunately some BMWs especially the 528i, the two hook is different size to tow than the engine. I had to use a engine tow for mini cooper.
8:44
My car
My car too , I need to get this done and my wheel bearings
Piece of junk scrap it
Mueves mucho la cámara se ve todo tembloroso .. muy mal muy mal
Disculpa, intentare de grabar mejor los videos.