Ryobi P7461D Stereo : New Speakers and Wireless Phone Charging
ฝัง
- เผยแพร่เมื่อ 26 ต.ค. 2020
- Ryobi P7461D Stereo : New Speakers and Wireless Phone Charging
Driver replacement with some modification
www.parts-express.com/dayton-...
Wireless Charger was on clearance but any charger that is less than 9.5mm thick should work. - แนวปฏิบัติและการใช้ชีวิต
Thanks for Sharing This!!!!! I had this same radio kinda tucked in the corner of the garage one speaker blown out. Ordered up some SKAR TX35 on the Rain Forest website $24 and about an hour for me. its back to daily use! I might add the wireless charger at some point.
The new Bluetooth speakers in 2022 a great sounding I don't know about the older ones but these new ones have a wonderful sound
nice work!
Thanks great vid
Badass 💪🏽
I want to do this too. I’m thinking of putting a spacer between the speaker and front side of the panel. That way, there’s clearance between the speaker magnet and circuit board.
That would probably give you all the clearance you need. Honestly any speaker is better than what is in there. If you can find one with a decent frequency response I bet you will be happy with it.
At the top of the speaker hole on the front it is very shallow but you still might be able to get a few millimeters out of it with a spacer with out hitting the grill.
@@ernestomartinez8302 I followed your link and picked up the same speakers you have.
I took all the screws out and I still can't even pry my way into the case. How did you get into yours so easy?
The speakers you installed were 4 ohm. I have a set of 3" 8ohm not being used from an entertainment system. Would they work? Thanks for the great video.
the volume would be less but it would be almost imperceptible. to be fair the boom box on its own is somewhat anemic. If you are after better sound quality, go for it.
Have You Heard The Sound Quality
Of Those Ryobi Boom boxes? They Sound Terrivle
Have you checked if the ac power supply adapter inside can accomodate 220v? coz the ryobi hybrid fan can be plugged in to 220v eventhough it says 120v on the print outside but when i opened it was 110v~230v indicated on its ac adapter.
No, I didn't notice if it was capable of 230v. Next time I have it open I will check.
I'll try to do the same on thep742 but can't figure out the size of the speaker. Do you measure the cone or the frame? I guess they're using the same size. How did you order it?🤔
I measured the mounting hole itself. The factory ones didn't have any mounting flanges so I knew whatever I did would require copious amounts of hot glue (my weapon of choice). The Factory speaker hole was 3 1/4 so I ordered a pair of 3" speakers knowing I would have to cut the flange to make it fit. I also tried to approximate the volume of the box so as to find a driver with with some desirable TS parameters to get at least a little bass. I settled on these. www.parts-express.com/dayton-audio-pc83-4-3-full-range-poly-cone-driver--295-154
You really should have screwed the speakers in. They'll vibrate loose.
I'm considering doing this to mine as the sound quality really sucks. Do you think a new amplifier would be better? I can't imagine it being that great, or are the factory speakers the bottle neck?
the factory speakers are definitely hot garbage. The speakers I chose offer a very balanced response. Highs are clear, mids are a bit forward bass is tight but I hope to get more bass as the cone losens up. there is always the option of equing to get more bass. As far as i can tell there are no strange artifacts on the amp side to worry about. Hotel California and George Strait's Cover of El Rey sounded very pleasant and natural on par with my studio setup. No Bluetooth artifacts that I hear. It is definitely a mod worth doing to make the radio usable.
@@ernestomartinez8302 alright, you've got me sold. If you were to do it again, would you use the same speakers or would you opt to try something else? Im ready to take the plunge, I hate the distortion the stock speakers give at higher volumes
@@ernestomartinez8302 actually the ones you linked are backordered, any other recommendations?
@@karlp2127 Not a lot of options right now. I did see that these are available but they don't offer a frequency plot for the Highs but the bass should be about the same as the Dayton drivers . www.parts-express.com/GRS-3FR-4-Full-Range-3-Speaker-4-Ohm-292-436. This driver does not inspire a lot of confidence without a Frequency plot.
@@ernestomartinez8302 i saw those, but then I was able to find the Daytons on Amazon, i got the last 2. Thanks!
Don’t waste your time doing this. The radio just sucks. I did it and it barely made any difference.