Please watch our installation video to see how to fit correctly.Firstly,taking the wheel from the car does in our experience make fitting a lot harder. We do also advise that the wheel and tyre be sprayed with a mild soapy water.This acts as a lubricant and makes the fitting a far easier process.The cutters used are not suitable.On our fitting instructions and fitting video we suggest that the cutting is performed by cutting though the fatter end of the profile first.
Wow! Watched the Official Alloygator video before this! You missed out loads! And why would you use tinsnips to cut plastic? If your gonna do a review like others have said, at least install the product correctly! #gimp
It requires hitting the profile on the inside face. Again this is shown on our fitting video. Point 9 also tells you to repeat this process with 10-15 psi in the tyre. From what we can see, this has been missed out. Point 10 of our instructions was missed out on your fitting also. The joining cap has been applied to the profile whilst the tyre is totally deflated, again we do not advise fitting in this way at any point.
Well you made a total hash of that. Try reading the instructions properly or looking at the official how to fit Alloy Gator video. This doesn't look like an unbiased independent test at all. In fact I'm guessing the next video will be you telling everyone how great rimringz are, much like the previous video where you spent a lot of time talking about the box they come in. YOU ARE MISLEADING, DECIEVEING AND INSULTING THE INTELLIGENCE OF YOUR POTENTIAL CUSTOMERS.
Piece of advice, research the products, watch the official fitting videos, then practice.............. and then, and then ONLY contemplate picking up a camera and reviewing!
Hi Darren, If you are truly looking to give an independent review on the 4 products, I’m sure you will not mind us commenting on your video post to assist both yourself and our many customers in the correct fitting of the AlloyGators. Having watched your video several times, we do feel it is important to point out that the fitting instructions have not been adhered to correctly during the installation.
This enables you to cut though the AlloyGator profile with one easy cut. Once you have cut the profile correctly we do advise on point 8. And photograph No.9 of our instructions that you were working to, that you run a small amount of glue along the teeth between the two ends before joining together. Point 9 was missed out from the fitting, this ensures the profile is correctly seated all the way around the profile
Why even bother doing an instruction video and get it so wrong! Wrong tools. Missed install steps. Made it look horrible when in fact it's the best on the market at present.
i have the alloy gators fitted to my 3series bmw. all was fine until i needed new tyres they did get the old gator back fitted to the new tyres but it took 2 hours and cost me £40 extra and now even worse i cant get wheel alignment done as the tool fitted to each wheel has to sit in the rim between alloy and tyre to get alignment correct i spoke to employee at two different tyre centre who use two different system but same problem the alloy gator website doesnt mention this in the faq NOT RIGHT!
AlloyGator are happy to work with genuine people and businesses looking to give an independent view. If you would like some assistance in the correct fitting we do have someone in your area that could happily assist.
Please watch our installation video to see how to fit correctly.Firstly,taking the wheel from the car does in our experience make fitting a lot harder. We do also advise that the wheel and tyre be sprayed with a mild soapy water.This acts as a lubricant and makes the fitting a far easier process.The cutters used are not suitable.On our fitting instructions and fitting video we suggest that the cutting is performed by cutting though the fatter end of the profile first.
You should put a link to your own video. 😉
I found it much easier to take my wheel off.
guys i used rimblades they keep coming off under speed, will these gators do the same or should i defo be buying them , any help be appreciated thanks
I bought something like that from China but the glue last couple of seconds and fell off
Wow! Watched the Official Alloygator video before this! You missed out loads! And why would you use tinsnips to cut plastic? If your gonna do a review like others have said, at least install the product correctly! #gimp
It requires hitting the profile on the inside face. Again this is shown on our fitting video. Point 9 also tells you to repeat this process with 10-15 psi in the tyre. From what we can see, this has been missed out. Point 10 of our instructions was missed out on your fitting also. The joining cap has been applied to the profile whilst the tyre is totally deflated, again we do not advise fitting in this way at any point.
Well you made a total hash of that. Try reading the instructions properly or looking at the official how to fit Alloy Gator video.
This doesn't look like an unbiased independent test at all. In fact I'm guessing the next video will be you telling everyone how great rimringz are, much like the previous video where you spent a lot of time talking about the box they come in. YOU ARE MISLEADING, DECIEVEING AND INSULTING THE INTELLIGENCE OF YOUR POTENTIAL CUSTOMERS.
anderson silva lent his voice to this video, english has improved lol
It's like Woody Allen doing an instructional video on how to throw a football
Wow you beating the fuck out of that rim ah!
Piece of advice, research the products, watch the official fitting videos, then practice.............. and then, and then ONLY contemplate picking up a camera and reviewing!
is there a part 3?? so which rim protector do you recommend??
Hi Darren, If you are truly looking to give an independent review on the 4 products, I’m sure you will not mind us commenting on your video post to assist both yourself and our many customers in the correct fitting of the AlloyGators. Having watched your video several times, we do feel it is important to point out that the fitting instructions have not been adhered to correctly during the installation.
AlloyGator I am loving all of the comments from you all I just bought my self a set of alloygators lol
He's definitely not following the instructions, that's for sure!
All that's missing is a wife beater vest when installing that alloygator
please people, don't install your AlloyGators like this. Use the right tools, and follow the procedure.
What happen to the Rim Ringz? Only reason I came here.
Select tyres with a rim protector built in !
So witch one did you like the best?? Your vid just cut off without showing the rest im thinking the rim ringz thou an i right??
i only have one serious question: why on earth would anyone install ugly shit like that? that looks totally shitty.
What fucking waste of my time........ didn't even finish the testing or fitting of them all......
Totally botched the install on the alloygators. Did nothing right.
What a lash up #cowboy🤠
I'm saying to myself better just learn how to practice parking better really
This enables you to cut though the AlloyGator profile with one easy cut. Once you have cut the profile correctly we do advise on point 8. And photograph No.9 of our instructions that you were working to, that you run a small amount of glue along the teeth between the two ends before joining together. Point 9 was missed out from the fitting, this ensures the profile is correctly seated all the way around the profile
we prefer rimringz
absolute garbage mate get your money back.
WTF!,!!! This is the How not to video😭😭😭😔😭
You have to break the bead..... SMH
How much did they charge? I got quoted £120.
You don't have to put glue on the clips
Please don't attempt to install anything again, you haven't got a clue. Especially don't film it and put it on TH-cam. Just make yourself look stupid.
where can i order this rim rings..??
This is some of the WORST camera work that I've ever seen on a TH-cam video. TERRIBLE!!!
Soapy water bro OMG
Why even bother doing an instruction video and get it so wrong!
Wrong tools. Missed install steps. Made it look horrible when in fact it's the best on the market at present.
If you had the correct tools for the job it makes it alot easier to get it done
i have the alloy gators fitted to my 3series bmw. all was fine until i needed new tyres they did get the old gator back fitted to the new tyres but it took 2 hours and cost me £40 extra and now even worse i cant get wheel alignment done as the tool fitted to each wheel has to sit in the rim between alloy and tyre to get alignment correct i spoke to employee at two different tyre centre who use two different system but same problem the alloy gator website doesnt mention this in the faq NOT RIGHT!
David LMAO what shops did you go to that had to outer weight balance your rims 😂 amatures..... static balanced
I had mine changed no problem, at least find a decent fitter that uses stick on weights ffs!
AlloyGator are happy to work with genuine people and businesses looking to give an independent view. If you would like some assistance in the correct fitting we do have someone in your area that could happily assist.
Definitely a must buy. Something so cheap to protect something so expensive.
Good video. Where is the rest? It cuts off half way through. Don't pay attention to the critics here, please upload it. I wanna see!
German: unmöglich, stumpfe Schere, kein Gefühl bei der Arbeit.
:)))))))damn,you don’t have power
Where is the rimringz install ::smh::
How did you survive to adulthood?
no this not too good
glue sucks