Hi there, there is a problem when aster is running with more than one display… Sunshine can only see one display even if there are three workplaces each with different display… any workarounds for this problem?
You have to run sunshine portable, not installer version also you may need to assign Ip to each workplaces for sunshine to be able to connect through IP of each workplace
My laptop have wifi and also an ethernet port. When Im home I sometimes use the ethernet port, and sometimes not. But in the modem each of them are separate entries for port forwarding. So I can only port forward to either the ethernet adapter or the wifi adapter. Is there a way to make it they are both listening to sunshine ports and I can game over internet to the host wether it is on cable or not thankss!
I am not that familiar with networking, but as you said you will have to set one entry for each ethernet and wifi adapter, i dont see any other way to do it. Perhaps you can find some solution to the sunshine github discussions page
Hi sorry to ask. but, how do you ran 2 sunshine? i can only detect 1. (either session A or B but never both ) i gave it another ip with aster to the sunshine folder.
@@astermultiseat hi, thank for your very very fast answer. after my question i tried give the ip assing to all the folders of workstation, but it was the same. you have tested it outside the same pc? (i mean not to connect workstation 1 to workstation 2) but to connect an andoid or whatever to either workstation?
@@REAccelerator Yes it has been tested on my Android TV as well as my phone. And works well. Once you have configured it and can be access individually, you can connect from any device in your network.
Please refer this guide. github.com/moonlight-stream/moonlight-docs/wiki/Setup-Guide#streaming-over-the-internet Please note, you will have to add port forwarding to all IPs for the workplaces, if you have assigned any ip to them
Thanks for the guide, this helped me make the setup.
Glad I could help
can you provide tutorial with sunshine + moonlight + virtual display + parsec?
Please refer mu other vidoes for virtual monitors to create workplaces as for the moonlight and sunshine this vidoe shows all the steps
Hi there, there is a problem when aster is running with more than one display… Sunshine can only see one display even if there are three workplaces each with different display… any workarounds for this problem?
You have to run sunshine portable, not installer version
also you may need to assign Ip to each workplaces for sunshine to be able to connect through IP of each workplace
My laptop have wifi and also an ethernet port. When Im home I sometimes use the ethernet port, and sometimes not. But in the modem each of them are separate entries for port forwarding. So I can only port forward to either the ethernet adapter or the wifi adapter. Is there a way to make it they are both listening to sunshine ports and I can game over internet to the host wether it is on cable or not thankss!
I am not that familiar with networking, but as you said you will have to set one entry for each ethernet and wifi adapter, i dont see any other way to do it.
Perhaps you can find some solution to the sunshine github discussions page
It is possible to use single Ethernet adapter?
Yes, you can set multiple ip to the ethernet and then assign the ip to each workplace from aster control
Hi sorry to ask. but, how do you ran 2 sunshine? i can only detect 1. (either session A or B but never both ) i gave it another ip with aster to the sunshine folder.
You have to use portable version of sunshine, don't assign ip to folder only leave it for all programs and folders and check
@@astermultiseat hi, thank for your very very fast answer. after my question i tried give the ip assing to all the folders of workstation, but it was the same. you have tested it outside the same pc? (i mean not to connect workstation 1 to workstation 2) but to connect an andoid or whatever to either workstation?
also i forgot. yeah both workstation are using the portable version, each one indepent folder
@REAccelerator yes both needs to be different folders as sunshine saves the configuration to the same folder in config folder
@@REAccelerator Yes it has been tested on my Android TV as well as my phone.
And works well. Once you have configured it and can be access individually, you can connect from any device in your network.
How to use Sunshine in WAN with aster
Please refer this guide.
github.com/moonlight-stream/moonlight-docs/wiki/Setup-Guide#streaming-over-the-internet
Please note, you will have to add port forwarding to all IPs for the workplaces, if you have assigned any ip to them