How to Replace Front Shock Absorber 2015-2020 Cadillac Escalade

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/if/1AAS...
This video shows you how to install a front shock absorber on your 2015-2020 Cadillac Escalade. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This process should be similar on the following vehicles:
2015 Cadillac Escalade
2016 Cadillac Escalade
2017 Cadillac Escalade
2018 Cadillac Escalade
2019 Cadillac Escalade
2020 Cadillac Escalade
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ob/1AXA...
• Pocket Screwdriver
• Pry Bar 1aau.to/ob/1AXA...
• 15mm Wrench 1aau.to/oa/1AXA...
• 18mm Wrench
• 9mm Wrench 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/ob/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• Strut Spring Compression Tool
• Trim Tool Set 1aau.to/oa/1AXX...
• Crimper
• Side Cutters
• Wire End Cutters
• Ratchet 1aau.to/ob/1AXA...
• Socket Extensions 1aau.to/ob/1AXA...
• Torque Wrench 1aau.to/ob/1AXA...
• Cloth Rags 1aau.to/oa/1AXS...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@samuelgreer5223]

Can you use regular struts instead of those?

[@topryder4everforceariders52]

Can you just cut the wires with the connector, then solder to the new wires?

[@sinsationalkidd86]

AWESOME 👏🏾

[@thedudeactual]

Great Details. Thank you!

[@badlatyn]

forgot to slide the cover that attaches the wire to the end of the strut

[@samuelgreer5223]

Can you use regular struts instead of those?

[@meema1]

Do you recommend an alignment after spring and shock replacement?

[@TripSaddie]

Yes

[@hectorelfather4788]

The wire is for????

[@dallas3575]

Great video, I have a question installed these and now after a couple day they are sagging. What do you think could be wrong thanks!

[@porsche1971]

did you replace the whole strut or only the shock? and, since you posted, have you figured out the problem?

[@vicentevilla8337]

@@porsche1971 I bought mine at autozone, the whole assembly, good thing they came with warranty.
Yet they it's sagging in the left side