How To Replace Front Brake Pads on Maserati Levante | How To Change Maserati Levante Front Brake Pad

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ก.พ. 2023
  • How To Change Maserati Front Brake Pads | How To Replace Front Brake Pads on Maserati Levante | Maserati Levante Front Brake Job DIY | How To Replace Front Brake Pads on Maserati Levante
    #HarjinderSidhu #Maseratilevantebrakes #maserati
    2017 Maserati Levante: Caliper bolts 100nm
    HIGH-PERFORMANCE Front Brake Pads - amzn.to/3VrHMrk
    673004427&673004626 Front&Rear Brake Pads - amzn.to/3APBXMp
    673004427 - amzn.to/3APCe1T
    673004626 - amzn.to/3U4JCxn
    brake pads Brembo - amzn.to/3MoEaTd
    Maserati Brake Pads - amzn.to/3HGrEuD
    Maserati brake pads and rotors - amzn.to/3vAQLgd
    How to Change Spark Plugs on Maserati - • Video
    Maserati Spark Plug - amzn.to/3s7qXpQ
    Tool Spark Plug - amzn.to/3v7tq5B
    mm socket set - amzn.to/3vanYPa
    Allen ranch tools - amzn.to/35gzTjF
    🙏 Shop online at Amazon - www.amazon.com/shop/mrsidhu3250
    Any Amazon Link in my description is an affiliate link. “As an Amazon Associate, I earn from qualifying purchases.” I would greatly appreciate it if you considered supporting my channel while shopping from the Amazon store by buying anything you needed from Amazon after clicking on one of the links. This gives me a small commission at no additional cost to you and helps me continue producing more videos! Thanks a million for your support!!🙏
    Additional items may be used:
    iCarsoft scanner - amzn.to/2LswvGt
    Engine oil filter wrench - amzn.to/2RBe5o4
    oil pump extractor - amzn.to/2WgptpW
    oil funnel - amzn.to/2MpzNw9
    oil drain pan - amzn.to/2ESkrdz
    Hex toolset - amzn.to/2RBA0eK
    Toolset - amzn.to/2JZ3LFd
    Screwdriver sets - amzn.to/2XydeH3
    Hydraulic jack for a car - amzn.to/2ImXZu3
    Jack stands - amzn.to/2InmBTd
    Wheel chocks - amzn.to/2JWiX63
    Toolset - amzn.to/2RUboyd
    Torx set - amzn.to/2XHr6Sr
    Drill - amzn.to/2RLbXdB
    microfiber towels for cars - amzn.to/2Ua8U11
    PLEASE SHARE THIS VIDEO! & "GIVE THIS VIDEO A THUMBS UP"
    Thank you so much for Watching and Commenting.
    PLEASE LIKE, SHARE, and SUBSCRIBE.
    {This video is for educational purposes only; Easy Steps assumes no liability for property damage or injury incurred due to any of the information contained in this video. Use this information at Your Own Risk. Easy Steps recommends safe practices when working on vehicles, Computers, Phones, cooking, and or with tools seen or implied in this video. Any Injury, Damage, or Loss that may result from improper use of these tools, equipment, or the information in this video is the Sole Responsibility of the user and not Easy Steps}.
    Please leave your comments below if you have any questions or concerns. I hope this helps someone out there. Cheers!
    *Disclaimer: All information is for educational purposes only and is the personal view of the author.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 28

  • @EasySteps_Sidhu
    @EasySteps_Sidhu  ปีที่แล้ว +6

    How to Change Maserati Front Brake Pads | How to Replace Front Brake Pads on Maserati Levante | Maserati Levante Front Brake Job DIY | How to Replace Front Brake Pads on Maserati Levante

  • @right2armbears685
    @right2armbears685 ปีที่แล้ว +3

    Great video! I just changed the brakes and rotors on my sister’s 2017 Levanti. I found that the 10mm hex was a little too loose to remove the caliper bolts, which may strip the heads. It is probably actually a 11mm, which is hard to find. I bought a set that had a 12mm hex and ground it down to an 11. For those people changing the rotors you need a 20 external Torx socket to remove the two caliper bracket bolts. You will also need a 5mm hex socket to remove the single bolt holding the rotor onto the hub. Thanks for posting.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  ปีที่แล้ว +1

      I am not sure but ours was a snuggly fit, only thing I think of maybe yours was loose (a little stripped). Thanks for sharing the info. and thanks for watching.🙏

  • @chghs001
    @chghs001 10 หลายเดือนก่อน +1

    More straight forward than other videos. Thanks for sharing your experience.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  10 หลายเดือนก่อน

      So nice of you, Thank you so much!! Thanks for the visit.
      😊Glad I could help. 🙏
      Thanks for the like and thanks for watching.🙏

  • @gilbertr.9221
    @gilbertr.9221 3 หลายเดือนก่อน +1

    I love your video ❤

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 หลายเดือนก่อน

      Thank you so much for your kind words. I'm so glad you found my video helpful. Thanks for watching!

  • @markanderson5342
    @markanderson5342 ปีที่แล้ว +1

    Great tutorial!

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  ปีที่แล้ว

      Glad you think so! 🙏 thanks for the visit.
      Please share, thanks.🙏
      Thanks for the like and thanks for watching.🙏

  • @kashf8694
    @kashf8694 9 หลายเดือนก่อน +1

    thank you sir

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  9 หลายเดือนก่อน

      So nice of you, Thank you so much!! Thanks for the visit.
      😊Glad I could help. 🙏
      Thanks for the like and thanks for watching.🙏

  • @infiniti2015
    @infiniti2015 ปีที่แล้ว +1

    Great video. Just bought the same vehicle in white! Did you need to apply anti squeal to the breaks to prevent noises?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  ปีที่แล้ว +1

      Thanks, glad it helped. No.
      Thanks for watching.🙏

  • @DanielGomez-ez9bi
    @DanielGomez-ez9bi 3 หลายเดือนก่อน +1

    Love it I so easily dealership want 2,600 for the hole car job

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 หลายเดือนก่อน +1

      I agree, the dealership is always expensive. DIY is the best way to save money. Thanks for watching!🙏

  • @gilbertr.9221
    @gilbertr.9221 3 หลายเดือนก่อน

    How many piston brake calipers???

  • @TheDustbinofHistory
    @TheDustbinofHistory 3 หลายเดือนก่อน

    Anyone know if the 2019 transport Model is the same?

  • @yefriaparcana2151
    @yefriaparcana2151 2 หลายเดือนก่อน

    What about resetting the dashboard light?

  • @XuliangZhang
    @XuliangZhang 21 วันที่ผ่านมา +1

    Hi, do you know the exact torque spec for the caliper bolt?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  21 วันที่ผ่านมา

      Caliper bolts 100nm

    • @XuliangZhang
      @XuliangZhang 21 วันที่ผ่านมา +1

      @@EasySteps_Sidhuthanks man

  • @gilbertr.9221
    @gilbertr.9221 3 หลายเดือนก่อน

    It’s this an S model?

  • @gilbertr.9221
    @gilbertr.9221 3 หลายเดือนก่อน +1

    But I’m having problems on ordering my brakes because there’s 2 different types. Mine it’s a S model

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 หลายเดือนก่อน +1

      I hope this video helps you change the front brake pads on your Maserati Levante. I used the part numbers listed in the description, and provided links to them as well. My car is an S model.

    • @gilbertr.9221
      @gilbertr.9221 3 หลายเดือนก่อน +1

      Thanks for your response and your help

  • @gilbertr.9221
    @gilbertr.9221 3 หลายเดือนก่อน

    S model???

    • @DanielGomez-ez9bi
      @DanielGomez-ez9bi 3 หลายเดือนก่อน

      Yes

    • @gilbertr.9221
      @gilbertr.9221 3 หลายเดือนก่อน

      How many brake pistons before I buy ? Some say 2 some 6