Dear Suzuki, WHY?!? Sincerely, a loyal customer. PRODUCTS USED FOR THIS BUILD: Shinko 216MX - Excellent tire with a decent price: www.rockymountainatvmc.com/tires-and-wheels/shinko-mx216-series-tire-p?ref=1046& (affiliate link) Nitromousse - Flat-proof tire inserts for racing: www.rockymountainatvmc.com/tires-and-wheels/nuetech-nitro-mousse-standard-progressive-platinum-foam-tube-p?ref=1046& (affiliate link) Tusk tire iron kit - You'll need this, plus two extra 15" curved tire irons to install a mousse at home: www.rockymountainatvmc.com/parts/tusk-tire-iron-kit-p?ref=1046& (affiliate link) Tusk bead tool - Extremely helpful for getting the tire bead to slip into the drop center and stay there while spooning or levering on a mousse-equipped tire: www.rockymountainatvmc.com/parts/tusk-motorcycle-tire-bead-tool-p?ref=1046& (affiliate link) Tusk spoke wrench - Small tool that fits spokes easily. Comes with many attachments to fit any OEM spoke: www.rockymountainatvmc.com/parts/tusk-spoke-wrench-set-p?ref=1046& (affiliate link) Tusk oil seal puller - The oil seals on old forks can be extremely stubborn. I used this tool to CAREFULLY pry out the old seals: www.rockymountainatvmc.com/parts/tusk-oil-seal-puller-p?ref=1046& (affiliate link) Maxima 10W suspension fluid - If you're ever not sure what oil to start with on a damper-rod/fixed-orifice-damped fork, this is a good starting point: www.rockymountainatvmc.com/parts/maxima-fork-oil-p?ref=1046& (affiliate link) Tusk Gasket Remover Kit - The gaskets on an old bike are extremely stubborn on mating surfaces. This gasket remover kit gets them off easier than trying to go at it with a blade: www.rockymountainatvmc.com/parts/tusk-3-piece-gasket-scraper-kit-p?ref=1046& (affiliate link) OEM Parts at Rocky Mountain - RM stocks an impressive amount of OEM parts. If it's even available at all, you can usually find it here: www.rockymountainatvmc.com/oem-parts?ref=1046& (affiliate link) Tusk Carbon Drum Brake Shoes - For the price, I'm totally impressed with how these turned out working on the SP500. Replaced OEM pads with these and, after initial break-in, they stop the bike pretty dang well and they don't wear away rapidly like some pads: www.rockymountainatvmc.com/parts/tusk-brake-shoe-carbon-p?ref=1046& (affiliate link) Fisch Moto Universal Spark Arrestor - Had to install this since I was unsure if there was a spark arrestor anywhere inside the funky exhaust on this thing. I was inspected by a park ranger on my second ride and she was happy with it: www.rockymountainatvmc.com/parts/fisch-moto-spark-arrestor-usfs-approved-p?ref=1046& (affiliate link) Kenda Trakmaster II - Best tire ever created? Let your wallet decide: www.rockymountainatvmc.com/tires-and-wheels/kenda-k760-trakmaster-ii-rear-tire-p?ref=1046& (affiliate link) Primary Drive X-Ring Chain - Basically an O-ring sealed chain with half the friction.Working well on this bike: www.rockymountainatvmc.com/parts/primary-drive-520-orh-gold-x-ring-chain-p?ref=1046& (affiliate link) Check out this page that has up-to-date info on my current bike setups! torturetestmagazine.com/pages/bikes Check out the page that has an up-to-date list of my current riding gear! torturetestmagazine.com/pages/current-gear Start shopping at Rocky Mountain ATV/MC by bookmarking my affiliate link! www.rockymountainatvmc.com/?ref=1046& See my Amazon favorites like the supplements I take to stay healthy and athletic! www.amazon.com/shop/torturetestmagazine Buy whatever you would normally buy on Amazon, but get there by bookmarking this link so I get a kickback! amzn.to/3vVlH8p Get a ton of teaser content by following my Instagram! instagram.com/torturetestmagazine/ Don't forget to subscribe with notifications turned on, hit thumbs up, leave a comment (even if it's just "leaving a comment to turbo charge the algorithm"), and share this content!
Hahah. Thanks and will do If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Here in Europe where ik life we call the SP500 a DR500. Only the 370 called SP. I ride a 1981 DR 250 and love this bike even it has no power. But for Some trailing it's a fun bike. You have a great channel and love your video's can't wait for the next won. Greatings from the Netherlands.
Nice. Twice as many shocks, twice as much sketchy fun 😂 If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Yep! Now let's just see how quickly I take away that new lease on life xD If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
When this bike came out, none of us wanted one. For the same price plus a case of beer you could get a big bore 2 stroke mx bike. I am so amazed at what you have gotten out of this bike.
Wonderful, amazing work Gabe! As a 56-year-old riding since the ‘70s, your creations are a hoot! Enjoy the journey, take good care and keep up the great job! You’re going places, dirty! Gratefully, Dennis
It's about time right? If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Man you could have made 2 or 3 episodes out of this whole rebuild and I think most of us (like all of us really) would have loved it ! More video more frequently would help you to grow this channel and its revenue and its not like you're not doing the job on the bike already. Most under rated channel on YT imo. Best of luck !
Good on you for the resurrection. I hate this disposable generation. As a farmer I'm a compulsive fixer. In the 1970's we used to drill out the top of the fork tube nut and install an alloy auto rim air valve, and pump just a few psi of air in the forks. A simple cheap upgrade for an old bike. I would ad a 10mm spacer washer on top of the fork spring, this wouldn't hurt either as the springs have shortened over the yrs too. Just an old Bushy's fix it advice for ya.
The SP is actually factory fitted with air-adjustable forks! I just always forget to use them 😂 If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Looking forward to the next vid. These old junk bikes are often more fun to watch videos about than the latest and greatest. Still not turning on the bell though.
There will be plenty more slo mo shots of this bike coming out! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Watching this with interest. I have a 1983 SP500 which I converted into an awesome cafe racer because of how bad it was as a dirt bike. I have a 2nd one in pieces which I originally wanted to turn into a vintage MX bike so I am watching your series to see if it's worth doing.
Oh man, and you drove this hunk of questionable japanese metal 1,000 miles AND took it 2 laps on an endurance race! You are definitely right about it being an upright turd but wow I'd be calling it a death trap. Despite this your content always brings a smile to my face and is getting my head thinking more and more about getting back in to racing again. Can't wait for the next videos and especially the one on that Dial-a-jet.
Thanks Bob! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Awesome video! I still can’t believe you raced that thing at the 6 hour. I thought for sure it was 1-and-done after those 2 laps at the 10 last year! 😆
Yessss boost for the algo. Thanks! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Thanks! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
@@TortureTestMagazine I'm already a patreon ofc !!! Signed the same day i discovered your channel ! You awaken a new energy in me !! I'm so gratefull to you !
"This bike is total crap in every way." LOL love it! Great video. I'm looking forward to seeing the continued process on this bike. Maybe a rematch with the RMATV crew on their bikes...?
Can't wait to see the test ride! You can tell by just the short clip its making WAY more juice. And I'm surprised you aren't running a Tusk rear tire. For your style races I'd prob love the Kenda DT rear. They last forever(DOT) and have way better lateral traction than the trackmasters. But I run the Tusk Recon for hard enduro stuff
Oh the power is HEALTHY now! And yeah usually the Trackmaster does me well but on this thing it just wasn't cutting it. Details on that in the next video! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Nice! Hope you enjoyed the RM series as much as I did! When the floats fell apart on this bike it just had me dying 🤣 If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Great job and I’m looking forward to the next video. If your not breaking stuff your not going hard enough. One day I’d love to see what you could do with a XR650R.
If it's not due for a bonkers front end swap, something like racetech cartridge emulators are the way to go for old, smooshy damper rod stuff like that! Like $150 or less and they make a world of difference.
Love to watch your content! Keep it up! Any chance you still have the jetting info from your XR250R with the OKO carb??? I have one that I want to do the swap on. Keep o roosting!!
Off the top of my head I think 155 main, 42 pilot, and Keihin ECF or FCH needle will get you in a position where it runs but PWK style carbs are extremely finicky with jetting. If it's not absolutely dialed for your application it will have annoying characteristics. Once it's dialed it's sweet If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Does that thing run yet? If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Thanks! Will do! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I'm not sure if it should be used with a pumper. Might be just fine but there could be a minor conflict. could probably be tuned out if the AP timing and volume can be precisely adjusted. What's not appealing about pumpers and flat slides? If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
@@TortureTestMagazine I'm not a racer and I ride an XR650L. Fuel consumption and elevation are the most important factors. I have heard that guys can get less than 30mpg with the pumpers on a 650. The other option is a Lectron, but I don't require a milled carburetor on my POS XR 😂. I ride with old guys on KTMs on dual sport type terrain, so keeping up isn't a huge problem. I have no reason to dislike my CV carb. If I could get the same performance from the other styles of carbs without the problems, that would be cool.
The Hog Rider is a rugged, dark-skinned man with a mohawk riding a large hog. He is bare-chested, wearing only a brown leather loincloth, a red belt and a pair of leather sandals. He has two large golden wristbands and a gold earring. His weapon of choice is a large warhammer. His mount is a large boar/hog, about half its rider’s height; the Hog Rider holds a brown leather bridle which is looped around the boar’s tusks. Because of his mount, the Hog Rider can jump over Walls, giving the user a great advantage over the enemy base. Although he has high damage per second and moderate hit points, he only takes 2 minutes to train. Hog Riders prioritize Defensive Structures above all other targets, and will bypass all other types of enemy Buildings and Troops while any Defenses remain on the battlefield. This is true even if they are under attack by enemy Clan Castle troops, Heroes or Skeleton Trap skeletons. Note that like all Troops that prioritize Defenses, Hog Riders do not consider the Clan Castle to be a Defenses regardless of whether or not it contains enemy Troops. Once all Defenses are destroyed, Hog Riders become like any other Troops with no preferred target; they will attack the nearest building to them regardless of type, and will turn and attack enemy units if they become aware of any nearby.
Great Videos! I have the same bike, it has some missing Carb. parts that are no longer made. Can you recommend a simple Aftermarket Carb you would replace it with? Not racing, I'm just trail riding around a mountain with it.
Does the elevation you ride at fluctuate a lot? Personally I would Get a PWK 36mm. A spesific model that is quality and reasonably Priced is an OKO 104 36mm. Make sure to Get a Main and pilot jet kit for your carburator as well. If you have more questions I will try to Help.
Yeah how bad could it be?! 😂 If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Dear Suzuki,
WHY?!?
Sincerely, a loyal customer.
PRODUCTS USED FOR THIS BUILD:
Shinko 216MX - Excellent tire with a decent price: www.rockymountainatvmc.com/tires-and-wheels/shinko-mx216-series-tire-p?ref=1046& (affiliate link)
Nitromousse - Flat-proof tire inserts for racing: www.rockymountainatvmc.com/tires-and-wheels/nuetech-nitro-mousse-standard-progressive-platinum-foam-tube-p?ref=1046& (affiliate link)
Tusk tire iron kit - You'll need this, plus two extra 15" curved tire irons to install a mousse at home: www.rockymountainatvmc.com/parts/tusk-tire-iron-kit-p?ref=1046& (affiliate link)
Tusk bead tool - Extremely helpful for getting the tire bead to slip into the drop center and stay there while spooning or levering on a mousse-equipped tire: www.rockymountainatvmc.com/parts/tusk-motorcycle-tire-bead-tool-p?ref=1046& (affiliate link)
Tusk spoke wrench - Small tool that fits spokes easily. Comes with many attachments to fit any OEM spoke: www.rockymountainatvmc.com/parts/tusk-spoke-wrench-set-p?ref=1046& (affiliate link)
Tusk oil seal puller - The oil seals on old forks can be extremely stubborn. I used this tool to CAREFULLY pry out the old seals: www.rockymountainatvmc.com/parts/tusk-oil-seal-puller-p?ref=1046& (affiliate link)
Maxima 10W suspension fluid - If you're ever not sure what oil to start with on a damper-rod/fixed-orifice-damped fork, this is a good starting point: www.rockymountainatvmc.com/parts/maxima-fork-oil-p?ref=1046& (affiliate link)
Tusk Gasket Remover Kit - The gaskets on an old bike are extremely stubborn on mating surfaces. This gasket remover kit gets them off easier than trying to go at it with a blade: www.rockymountainatvmc.com/parts/tusk-3-piece-gasket-scraper-kit-p?ref=1046& (affiliate link)
OEM Parts at Rocky Mountain - RM stocks an impressive amount of OEM parts. If it's even available at all, you can usually find it here: www.rockymountainatvmc.com/oem-parts?ref=1046& (affiliate link)
Tusk Carbon Drum Brake Shoes - For the price, I'm totally impressed with how these turned out working on the SP500. Replaced OEM pads with these and, after initial break-in, they stop the bike pretty dang well and they don't wear away rapidly like some pads: www.rockymountainatvmc.com/parts/tusk-brake-shoe-carbon-p?ref=1046& (affiliate link)
Fisch Moto Universal Spark Arrestor - Had to install this since I was unsure if there was a spark arrestor anywhere inside the funky exhaust on this thing. I was inspected by a park ranger on my second ride and she was happy with it: www.rockymountainatvmc.com/parts/fisch-moto-spark-arrestor-usfs-approved-p?ref=1046& (affiliate link)
Kenda Trakmaster II - Best tire ever created? Let your wallet decide: www.rockymountainatvmc.com/tires-and-wheels/kenda-k760-trakmaster-ii-rear-tire-p?ref=1046& (affiliate link)
Primary Drive X-Ring Chain - Basically an O-ring sealed chain with half the friction.Working well on this bike: www.rockymountainatvmc.com/parts/primary-drive-520-orh-gold-x-ring-chain-p?ref=1046& (affiliate link)
Check out this page that has up-to-date info on my current bike setups! torturetestmagazine.com/pages/bikes
Check out the page that has an up-to-date list of my current riding gear!
torturetestmagazine.com/pages/current-gear
Start shopping at Rocky Mountain ATV/MC by bookmarking my affiliate link! www.rockymountainatvmc.com/?ref=1046&
See my Amazon favorites like the supplements I take to stay healthy and athletic! www.amazon.com/shop/torturetestmagazine
Buy whatever you would normally buy on Amazon, but get there by bookmarking this link so I get a kickback! amzn.to/3vVlH8p
Get a ton of teaser content by following my Instagram! instagram.com/torturetestmagazine/
Don't forget to subscribe with notifications turned on, hit thumbs up, leave a comment (even if it's just "leaving a comment to turbo charge the algorithm"), and share this content!
dammmm you still got that bike 🧐🤯
Love you bro, you're a true inspiration.
💯
you need WAAAAAAAAAY more subs, love to ya brother, thanks for the entertainment.
Dig your channel. I call my XR the KTM tear collector thanks to you. Keep it up!
Hahah. Thanks and will do
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Here in Europe where ik life we call the SP500 a DR500. Only the 370 called SP. I ride a 1981 DR 250 and love this bike even it has no power. But for Some trailing it's a fun bike. You have a great channel and love your video's can't wait for the next won. Greatings from the Netherlands.
Nice. Twice as many shocks, twice as much sketchy fun 😂
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Super! Díky Czech Republik! 👍
The legend lives on🤙
Glad to see you give the ol' pooper a new lease on life! Looking forward to the series
Yep! Now let's just see how quickly I take away that new lease on life xD
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Nice work Gabe , seriously great video
When this bike came out, none of us wanted one. For the same price plus a case of beer you could get a big bore 2 stroke mx bike. I am so amazed at what you have gotten out of this bike.
let’s gooooo sp500 back
Love these rebuilds, making junk great again. Looking forward to the next vid.
I love watching you crush dreams on junk bikes
Wonderful, amazing work Gabe! As a 56-year-old riding since the ‘70s, your creations are a hoot! Enjoy the journey, take good care and keep up the great job! You’re going places, dirty! Gratefully, Dennis
Loved the transformation. I thought that this bike will be forgotten but it is going stronger than ever!
Finally!! I haven’t watched it yet I’m just happy you have a video out
It's about time right?
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Man you could have made 2 or 3 episodes out of this whole rebuild and I think most of us (like all of us really) would have loved it ! More video more frequently would help you to grow this channel and its revenue and its not like you're not doing the job on the bike already. Most under rated channel on YT imo. Best of luck !
Good on you for the resurrection. I hate this disposable generation. As a farmer I'm a compulsive fixer. In the 1970's we used to drill out the top of the fork tube nut and install an alloy auto rim air valve, and pump just a few psi of air in the forks. A simple cheap upgrade for an old bike. I would ad a 10mm spacer washer on top of the fork spring, this wouldn't hurt either as the springs have shortened over the yrs too. Just an old Bushy's fix it advice for ya.
The SP is actually factory fitted with air-adjustable forks! I just always forget to use them 😂
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Sooper Pooper VVT :D :D :D Love it. Looking forward to the next installment!
Love this I want to find a basket case to build
Looking forward to the next vid. These old junk bikes are often more fun to watch videos about than the latest and greatest. Still not turning on the bell though.
Great work as usual, i absolutely love the slow mo shots. Fantastic to see how you took care of the SP
There will be plenty more slo mo shots of this bike coming out!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Watching this with interest. I have a 1983 SP500 which I converted into an awesome cafe racer because of how bad it was as a dirt bike. I have a 2nd one in pieces which I originally wanted to turn into a vintage MX bike so I am watching your series to see if it's worth doing.
Great work on the dunga revival bud.
Keen to see a video on the Dial-A-Jet
Little late but extremely hyped up that you are starting to upload can't wait for episode 2
Enjoyed the video, can't wait for more about the bike as it sounded / looked great (minus the kickstart) at the end!
Going to be unstoppable now! Love it!!
cant wait to see you have atleast 300k or more subscriber since you deserve more that your current number of subscriber just hang in there!
Oh man, and you drove this hunk of questionable japanese metal 1,000 miles AND took it 2 laps on an endurance race! You are definitely right about it being an upright turd but wow I'd be calling it a death trap. Despite this your content always brings a smile to my face and is getting my head thinking more and more about getting back in to racing again. Can't wait for the next videos and especially the one on that Dial-a-jet.
Thanks for getting me back into riding. Love your channel!
Love your content. Well done Gab !!!
Thanks Bob!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Great video! Won't be able to sleep waiting for the next episode!!
Two weeks of no sleep 😆 thanks for being a channel member, as always!
Awesome video! I still can’t believe you raced that thing at the 6 hour. I thought for sure it was 1-and-done after those 2 laps at the 10 last year! 😆
All I needed was for the bike to be able to make the hill! lol
You have to do a collaboration with that dude who builds turbo cafe racers!
Leaving a comment to supercharge the algorithm😂 but seriously, I love your bike build videos!!
Yessss boost for the algo. Thanks!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
2 strokes need to make a comeback, a elsinore 125 from the same era would put this bike to shame.
So intrigued to see how this endeavor turns out!
I really do like your vids, this one made me lol a couple of times.
That thing is TERRIBLE! 😂 You're a friggin stud, Gabe! Keep on rocking - Wes
Loving your channel from italy !💗
Thanks!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
@@TortureTestMagazine I'm already a patreon ofc !!! Signed the same day i discovered your channel ! You awaken a new energy in me !! I'm so gratefull to you !
We need more 2 stroke content!
"This bike is total crap in every way." LOL love it! Great video. I'm looking forward to seeing the continued process on this bike. Maybe a rematch with the RMATV crew on their bikes...?
thanks
Can't wait to see the test ride! You can tell by just the short clip its making WAY more juice. And I'm surprised you aren't running a Tusk rear tire. For your style races I'd prob love the Kenda DT rear. They last forever(DOT) and have way better lateral traction than the trackmasters. But I run the Tusk Recon for hard enduro stuff
Oh the power is HEALTHY now! And yeah usually the Trackmaster does me well but on this thing it just wasn't cutting it. Details on that in the next video!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I love these videos.
that chopping board number plate look vintage😂
this is a good one. I watched the rmatvmc series 😁
Nice! Hope you enjoyed the RM series as much as I did! When the floats fell apart on this bike it just had me dying 🤣
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I LOVE YOUR VIDEOS
Great job and I’m looking forward to the next video. If your not breaking stuff your not going hard enough. One day I’d love to see what you could do with a XR650R.
He’s done races with a xr600r I believe
@@dog_g5048 I think he did but a Xr650r would be interesting with him riding it
When I had this bike brand new it was the only vehicle I had and rode it all year it was a beast! 75% street 25% off-road miss that bike
Is that Carnegie SVRA??? Woulda loved to seen you out there!
That thing is way too fast for how much suspension travel it has. Love it!
It sure is! Might be getting some real suspension upgrades soon though after what happened lol
@@TortureTestMagazine 👀
If it's not due for a bonkers front end swap, something like racetech cartridge emulators are the way to go for old, smooshy damper rod stuff like that! Like $150 or less and they make a world of difference.
Leaving a comment to turbo charge the algorithm.
Love to watch your content! Keep it up! Any chance you still have the jetting info from your XR250R with the OKO carb??? I have one that I want to do the swap on. Keep o roosting!!
Off the top of my head I think 155 main, 42 pilot, and Keihin ECF or FCH needle will get you in a position where it runs but PWK style carbs are extremely finicky with jetting. If it's not absolutely dialed for your application it will have annoying characteristics. Once it's dialed it's sweet
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Proving once again that more money does not equate to more fun.
Hey man awesome video love budget building, where do you get the direct actuated carb from?
Good video. Makes me want to get after the 77’ XT500! We have some riding to do.
Does that thing run yet?
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Loving the vids, keep it up !
Thanks! Will do!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Were the last few riding shots at Carnegie?
Dial a jet video! Please sir lol
Forks off a old RM will slide right into the clamps
Ow man, where's the next episode? greetings, a ft500 Scrambler owner.
Yo, what kind of casio do you have on? W800h?
I'm thinking of doing this instead of buying a new bike. Interesting
I'm interested in that dial a jet to see if it makes the pumper/flatslide carbs more appealing.
I'm not sure if it should be used with a pumper. Might be just fine but there could be a minor conflict. could probably be tuned out if the AP timing and volume can be precisely adjusted. What's not appealing about pumpers and flat slides?
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
@@TortureTestMagazine I'm not a racer and I ride an XR650L. Fuel consumption and elevation are the most important factors. I have heard that guys can get less than 30mpg with the pumpers on a 650. The other option is a Lectron, but I don't require a milled carburetor on my POS XR 😂. I ride with old guys on KTMs on dual sport type terrain, so keeping up isn't a huge problem.
I have no reason to dislike my CV carb. If I could get the same performance from the other styles of carbs without the problems, that would be cool.
nice one
The Hog Rider is a rugged, dark-skinned man with a mohawk riding a large hog. He is bare-chested, wearing only a brown leather loincloth, a red belt and a pair of leather sandals. He has two large golden wristbands and a gold earring. His weapon of choice is a large warhammer.
His mount is a large boar/hog, about half its rider’s height; the Hog Rider holds a brown leather bridle which is looped around the boar’s tusks.
Because of his mount, the Hog Rider can jump over Walls, giving the user a great advantage over the enemy base.
Although he has high damage per second and moderate hit points, he only takes 2 minutes to train.
Hog Riders prioritize Defensive Structures above all other targets, and will bypass all other types of enemy Buildings and Troops while any Defenses remain on the battlefield. This is true even if they are under attack by enemy Clan Castle troops, Heroes or Skeleton Trap skeletons.
Note that like all Troops that prioritize Defenses, Hog Riders do not consider the Clan Castle to be a Defenses regardless of whether or not it contains enemy Troops.
Once all Defenses are destroyed, Hog Riders become like any other Troops with no preferred target; they will attack the nearest building to them regardless of type, and will turn and attack enemy units if they become aware of any nearby.
👍
What happen to the xr600?
How did you wire the ignition to a switch? Im currently working on one. And can't find any diagrams online since it has 4 wires.
👏👏👏🤘🤙
Great Videos! I have the same bike, it has some missing Carb. parts that are no longer made. Can you recommend a simple Aftermarket Carb you would replace it with? Not racing, I'm just trail riding around a mountain with it.
Does the elevation you ride at fluctuate a lot?
Personally I would Get a PWK 36mm. A spesific model that is quality and reasonably Priced is an
OKO 104 36mm.
Make sure to Get a Main and pilot jet kit for your carburator as well. If you have more questions I will try to Help.
Siiiiiiiiiiiick 👍
....he just drifted mid wheelie........ how???...who????...HOW?!?!?
Besides, they're usually cheaper to rebuild!
This sounds like a John Deere tractor
It’s just one spoke!
Yeah how bad could it be?! 😂
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Surely you fixed the hole in the engine? Right?
Comment
Good work man.
Take time for yourself
Enjoy life.
🤘🏻
𝐩𝐫𝐨𝐦𝐨𝐬𝐦 💯