I have never seen an explanation of the workings of a charger as you have done. I'm in Texas and just for your complete and thorough explanation of the charger I have become a subscriber to your channel even if I don't have any use to the rest of your reviews. Keep up the good work!!! 👍 👍 👍 💪 💪 💪
Thanks for the good reviews. In the review video, the depth of the ENVIL is due to the incompatibility of the Dewalt drill (+ double-sided) long driver bits. In Korea and Japan, deep anvil is the mainstay of the market, and MAKITA is a Japanese product, so it seems to be equipped with a long anvil. This deep anvil is useful because you can use long driver bits as well as short driver bits. Of course, you can find Dewalt's deep anvils on the service parts list and get replacement service.
exactly the same models im looking at as well. im leaning to the makita, just because of the low price. also because i havent really been able to find much info on the others
Can you use it as a regular screwdriver? I mean when I assemble delicate Ikea furnitures when it stops on lowest torque can I tighten screw manually? Bigger tool I have even on lowest torque screws in way to much and destroys furniture.
How would you make a 80-140volt input 72volt output circuit at 600 amps? Multiples in parallel would be acceptable unless i want to use a non existent gauge of wire / solid rod.
I have a TD020D for 15? years most useful tool that I have ever owned. The forward switch failed and I see that there is nothing similar now available so I will attempt replacing the switch which apparently is available. Best tool ever made IMHO but I'm no tool expert. Maybe there is a better tool?
Looks like you have a choice of a TD021D or the newer model TD022D as a modern equivalent. These are available in Japan, but I'm not sure about other countries.
Picked one up today; it's got heaps of torque but it does have some annoying handling problems. The collet lock is too small and stiff to get a grip on so you need a third hand to remove a bit. The torque settings are also too small to grip onto and the action is very stiff. Beware of the folding action: very easy to inadvertently fold it and get a nasty pinch on the hand or a finger.
Get the impact driver version. Lighter, variable speed, and can drive some seriously massive screws or (using the variable speed) some delicate fasteners. It’s my favorite tool out of the massive collection I have. It also uses a unique “trigger” that is really a sliding dial and it’s on both sides of the tool. I have both the drill and impact, the drill is buried under all my crap tools lol
I'm thinking about getting one of these. Seems like a capable little driver. How is it as a drill? The Makita catalog says it can drill in wood up to 6mm and metal up to 5mm. About the ring light, I think you might be on to something with the patents. I saw a Black and Decker one with a ring light today. Black and Decker and DeWalt are the same company.
It works well as a drill for smaller holes, I've pushed it to 8mm in plastic and thin aluminium. I also used it to drill 3mm holes in cast iron for the machine repairs in a recent video. It isn't as fast as a real drill due to the lower RPM, but it is really handy for smaller holes as it it lightweight and easy to handle. It has it's limitations due to it's small battery and motor, but if you use it within it's capacity it's a great tool.
Circular saw blades also have “Regional” inside diameter specs that will not interchange with incorrect region saws. Brought my tools overseas, replaced expendable blades/bits with local spec variety to bad results.
Hi sir, thank you for the nice review! I am wondering if I can use this to put up shelves around my apartment. I am looking for a tool that does it all around the household. In all honesty, there's a Father's Day special going on right now and I can purchase the whole kit Karma the Canadian / American one for $50. Should I? Thank you!
It's a great tool, I use mine to install servers in datacenters all the time, so for home use it will be great. It isn't as powerful as a proper drill, but perfect for it's intended use (and I do use drill bits in it for plastic aluminium and wood and it's good for that too). For $50, it's a steal. I'd buy two! :D
That motor has a makita M stamped in it, looks purpose build probably for that drill and their pen impact driver. Also the terminals aren’t soldered because there’s no brush replacement process, you just swap the whole motor. Nice and easy, beautiful tool. Also those bits are Japanese standard. Called JIS bits. Better contact area I guess…
Western spec bits fit Japan spec driver sockets BUT can fall in too deep/ the ball bearing spring collar lock won’t properly engage. Then, what happened to me, the bit wouldn’t come back out. Disassembled collar, applied torch to heat & expand collar, then bit removed with pliers. Be warned.
Yeah, I have seen them around and a lot of tradespeople here in Japan use them I noticed. I do more delicate work that needs the fine torque adjustment, but I might pick up the impact version one day.
Bruv if you like that thing you must try the makita 18v sub compact impact and or hammer drill driver there super light especially with a 2.0 battery on it and have a ton of power too but you can tone it down for small fasteners the impact is a 3 speed plus variable trigger on all the speeds and the hammer drill driver has 2 speeds plus the torque setting on the chuck plus variable speed trigger so there so versatile n great n also not super expensive
No, the makita pen impact driver is the best. I have both of those tools you mentioned and I never touch the impact. On the other hand I love the drill.
I have never seen an explanation of the workings of a charger as you have done. I'm in Texas and just for your complete and thorough explanation of the charger I have become a subscriber to your channel even if I don't have any use to the rest of your reviews. Keep up the good work!!! 👍 👍 👍 💪 💪 💪
Thanks for the good reviews.
In the review video, the depth of the ENVIL is due to the incompatibility
of the Dewalt drill (+ double-sided) long driver bits.
In Korea and Japan, deep anvil is the mainstay of the market,
and MAKITA is a Japanese product, so it seems to be equipped with a long anvil.
This deep anvil is useful because you can use long driver bits as well as short driver bits.
Of course, you can find Dewalt's deep anvils on the service parts list and get replacement service.
wow man, your in depth video and the knowledge of all the materials is so impressive! Thank you for sharing & regards from Poland
great review; this was exactly what i was looking for. no clue where the dislikes come from though wth people
Downvotes generally come from jackasses.
Do you know what the difference between the Makita, Hitachi, and Panasonic models are?
And what's the approximate price/s AUD?
exactly the same models im looking at as well. im leaning to the makita, just because of the low price. also because i havent really been able to find much info on the others
Where can we buy that holster in North America?
Great in depth review
Can you use it as a regular screwdriver? I mean when I assemble delicate Ikea furnitures when it stops on lowest torque can I tighten screw manually? Bigger tool I have even on lowest torque screws in way to much and destroys furniture.
Yep, it has a locking mechanism in the gearbox so you can turn it like a regular screwdriver. It's actually a feature they advertise on the box. :)
@@NearFarMedia Thank you!
How would you make a 80-140volt input 72volt output circuit at 600 amps?
Multiples in parallel would be acceptable unless i want to use a non existent gauge of wire / solid rod.
I have a TD020D for 15? years most useful tool that I have ever owned. The forward switch failed and I see that there is nothing similar now available so I will attempt replacing the switch which apparently is available. Best tool ever made IMHO but I'm no tool expert. Maybe there is a better tool?
Looks like you have a choice of a TD021D or the newer model TD022D as a modern equivalent.
These are available in Japan, but I'm not sure about other countries.
It looks awesome, is the model number different in other countries. I can't find it.
In the USA it is part number DF012DSE
Is the impact version of this better than the new 8v gyro DeWalt?
By far.
How to shoping
Picked one up today; it's got heaps of torque but it does have some annoying handling problems. The collet lock is too small and stiff to get a grip on so you need a third hand to remove a bit.
The torque settings are also too small to grip onto and the action is very stiff.
Beware of the folding action: very easy to inadvertently fold it and get a nasty pinch on the hand or a finger.
The pinch is real..... 😂
Mine shown in the video is still going strong, I love it.
Get the impact driver version. Lighter, variable speed, and can drive some seriously massive screws or (using the variable speed) some delicate fasteners. It’s my favorite tool out of the massive collection I have. It also uses a unique “trigger” that is really a sliding dial and it’s on both sides of the tool. I have both the drill and impact, the drill is buried under all my crap tools lol
I'm thinking about getting one of these. Seems like a capable little driver. How is it as a drill? The Makita catalog says it can drill in wood up to 6mm and metal up to 5mm.
About the ring light, I think you might be on to something with the patents. I saw a Black and Decker one with a ring light today. Black and Decker and DeWalt are the same company.
It works well as a drill for smaller holes, I've pushed it to 8mm in plastic and thin aluminium.
I also used it to drill 3mm holes in cast iron for the machine repairs in a recent video.
It isn't as fast as a real drill due to the lower RPM, but it is really handy for smaller holes as it it lightweight and easy to handle.
It has it's limitations due to it's small battery and motor, but if you use it within it's capacity it's a great tool.
Thanks for the reply!
Just happened to get one but my one got X at the end of the model name what thats mean
Refurbished I believe.
The gears are plastic which is shame... Wanted to get one, glad watched a good review.
Excelente vídeo NFM, felicitaciones.
Me gustaría saber dónde has conseguido la funda, me encanta
PERDON POR MI RETRAZO ES QUE ESTAB EN EL BAÑO OK .,
Would be great if you could teardown the 7.2V battery pack and review the batteries and the BMS PCB inside.
where to buy from australia?
Circular saw blades also have “Regional” inside diameter specs that will not interchange with incorrect region saws. Brought my tools overseas, replaced expendable blades/bits with local spec variety to bad results.
Hi sir, thank you for the nice review! I am wondering if I can use this to put up shelves around my apartment. I am looking for a tool that does it all around the household. In all honesty, there's a Father's Day special going on right now and I can purchase the whole kit Karma the Canadian / American one for $50. Should I? Thank you!
It's a great tool, I use mine to install servers in datacenters all the time, so for home use it will be great.
It isn't as powerful as a proper drill, but perfect for it's intended use (and I do use drill bits in it for plastic aluminium and wood and it's good for that too).
For $50, it's a steal. I'd buy two! :D
This video has just saved me a £100 repair bill! Thank you, Great vid!! 👍🏼🤓
You're welcome!
That motor has a makita M stamped in it, looks purpose build probably for that drill and their pen impact driver. Also the terminals aren’t soldered because there’s no brush replacement process, you just swap the whole motor. Nice and easy, beautiful tool. Also those bits are Japanese standard. Called JIS bits. Better contact area I guess…
I expect it might be a Mabuchi motor, they make a LOT of motors for all sorts of uses.
Western spec bits fit Japan spec driver sockets BUT can fall in too deep/ the ball bearing spring collar lock won’t properly engage. Then, what happened to me, the bit wouldn’t come back out. Disassembled collar, applied torch to heat & expand collar, then bit removed with pliers. Be warned.
Probably look into the hikoki "packout" to hold your tools. Living in us the hikoki is a bit pricey
That Motor is Mabuchi Motor. Japanese manufacturer with not the best, but good and durable motors.
This or the Bosch Go v2?
I've never been overly impressed with Bosch gear, so my vote is with the Makita. :)
Why is this thing so expensive in the usa? Its like 180 for tge kit! The dewalt gyro is like 120 with 2 batteries
11:00 and 13:35 "green" ? It seems i have a colour vision disorder , i see blue :) . Great videos NFM
This is a timeless makita argument.
This is not a review by someone thats actually used it. Just an unboxing and disassembly.
Handy as hell. Check out the impact version.
Yeah, I have seen them around and a lot of tradespeople here in Japan use them I noticed.
I do more delicate work that needs the fine torque adjustment, but I might pick up the impact version one day.
It´for right hand only?
You can use it left handed too, just use your pointer finger to press the switch instead of your thumb.
But it´s not confortable that. Should be thinked for both hands.
Dewalt has one like this that has no buttons it turn with your risk
Bruv if you like that thing you must try the makita 18v sub compact impact and or hammer drill driver there super light especially with a 2.0 battery on it and have a ton of power too but you can tone it down for small fasteners the impact is a 3 speed plus variable trigger on all the speeds and the hammer drill driver has 2 speeds plus the torque setting on the chuck plus variable speed trigger so there so versatile n great n also not super expensive
Sounds like a nice bit of kit. I'll check it out! :)
No, the makita pen impact driver is the best. I have both of those tools you mentioned and I never touch the impact. On the other hand I love the drill.
Great review
All the mechs at Round 1 use these.
It is using a Mabuchi motor
Why don't I see this in home depot
show stopper DF012DSE
Check HD for the new price. Great deal.
Are those bits JIS instead of Philips head?
All the bits in the video are Philips bits. It's what I usually use where I work.
Bro, you don’t need to download the instructions!! Us guys don’t need any stinkin instructions! 🤣
Too true, real men don't need instructions!
cool!
Holy Fuck boys max moe foe and ave seem to have merged into one person ! Lol
I guess Makita could give a crap less about lefty’s...
The impact version is ambi
Sorry, green plastic?🤣🤭🤗
Das war kein Review
FUCK - after all that...all 25 fucking minutes of it, you never actually reviewed the fucking Electric Screwdriver.
Way too pricey for a Made in China tool.
impact is shorter so you "can't" use non impact rated bits in an impact driver as they are harder "and more brittle" thus more likely to break.
nope
WRONG! lol try again.