AAT, ACA - What are they and what are the differences?
ฝัง
- เผยแพร่เมื่อ 1 ธ.ค. 2024
- Many of you have been asking for this video, so… you suggested it and now we answer. In this episode Mike and Yancy will be discussing both of these 3D abrasive technologies in-depth. This is going to be a good one!
__________________________________________________________
Shop ACA & AAT - 3dproducts.com...
__________________________________________________________
Don't forget to Follow, Like, Share, Subscribe and be sure to click the bell to get notified!
** Follow 3D Car Care **
3D Facebook - / 3dproducts
Instagram - / 3dcarcare
TH-cam - / 3dcarcare
Detailing Society Group - / 3dcarcare
** Follow Mike Phillips **
Facebook - / mikephillips3d
Instagram - / mikephillips3d
** Follow Yancy Martinez **
Facebook - / michealangelo1
Instagram - / michealangelo
#3dcarcare #3dcarcareproducts #cardetailingproducts #detailersofinstagram #autodetailing
I really enjoyed this video and as always I learned from listening to Mike! I truly appreciate the Thursday show!
Glad you enjoyed it! That is why we are here - he is a welsh of knowledge and I am so grateful to be able to work with him. - Yancy
To be honest i bought a small bottle of the aca 500 jut to test it and i love that it has high working time, no dust, cleans so easy and also finishes down preety good. I will buy the big bottle in the future.
Great stuff, guys! I'd love to see videos going over your different waxes and tire dressings.
Great suggestion! Will work that in to a future episode. - Yancy
Great information guys !
Thanks for watching! We are here LIVE every Thursday - Yancy
I first started watching chemical guys when I first started washing my cars, now I'm watching 3d and man what a difference
Thanks we will take that as a compliment! Thanks for watching! - Yancy
Yancy SERIOUSLY needs to stop CONSTANTLY interrupting Mike, it gets annoying in the video.
Selective hearing
Very hard to watch.
Guys he’s done that for 15 years. People break his halls about it but he never changes
Great VDO guys! May we ask one question? How can we know that it was hard paint or soft paint ?
Great question and everyone wants a SIMPLE answer but there is no simple answer. The REAL answer is YOU need to buff out a LOT of cars and remember how easily or how difficult it was to remove the defects using the tools, pads, products and technique you bring to the process. Too many variables. In my classes, I do the Test Spot on each car the class details and I share with them via a live demo if the paint is hard or soft.
Click the link below. I am the ONLY "instructor" in our industry that can share this volume of pictures in a class because the pictures you'll see from other classes are,
People sitting in chairs looking at the wall while some person drones on and on and on.
People using a polisher on a flat hood on fender stand. You don't learn anything running a polisher over a flat hood. LOL
www.3ddetailtalk.com/threads/2023-february-3-day-detailing-class-in-stuart-florida-no-chairs-no-sitting-100-hands-on.340/
-Mike Phillips
I am looking forward to the carpet cleaning video! After the pre-soak video, I really would love to see more videos that also highlight 3D's interior products. What are they good at doing and what are they not so good at doing?
Coming soon! Will work an interior video in when we have a convertible in the shop. Thanks for tuning in! - Yancy
I detail in NC, I truly enjoy 3D One!!!!
Right on! Thanks for watching - Yancy
Great video yet again. Thank you for clearing up these systems. Helps me make a decision. So far I've been using 3D ONE and AAT 505, Poxy for the past two years. With the 3D purple pads. I have a bottle of P&S Plsymaker and I've only used it 5 TIMES. I might as well give it away. It's so hard to remove and extremely dusty. 3D products all the way for me. Would love to see the interior line of 3D products in n your videos.
Glad to help! Will work an interior video in when we have a convertible in the shop. Thanks for tuning in! - Yancy
Where are these classes that he teaches
At the 3D Training Center in sunny, Stuart Florida. Someone said "Autogeek". WRONG. I left Autogeek over a year ago because they current owner turned the company into a toxic work environment. Check this out,
www.3ddetailtalk.com/threads/2023-february-3-day-detailing-class-in-stuart-florida-no-chairs-no-sitting-100-hands-on.340/
The last class Autogeek taught with their new "instructors" had 9 Instructors and 7 students. Total failure and I feel sorry for the people that PAID to take that class or any of their current classes.
-Mike Phillips
Great product!
Watching later from Hutto, TX.
Thanks for tuning in! - Yancy
Is that considered a 2step enhancement you guys did here on the 510 & 520
Yes it is - Yancy
great job .when using the all in one how many passes is required sir.tunde from Nigeria
6 to 8 sections passes, that is why we preach to do a test spot to see how many passes you have to do to correct the paint. Thanks for tuning in! - Yancy
Hi guys great video I’ve been using meguiars one step also just recently purchased McKee rv polish and wax can 3d one also be used on a fibreglass travel trailer and then finish with 3d poxy thanks
Yes it can - that is a great combo. But it you want to do it all in one step I would recommend 3D Speed. Same as one for correction and has Poxy already in it. - 3dproducts.com/collections/compounds-polishes/products/3d-speed-all-in-one-polish-wax
Yancy
@@3DCarCare right on thanks
Hi Mike and Yancy,
Great video
Why is 3D ACA 510 is not available in Indonesia? The only available products is 500, 520 ,ATA seriew ,speed and 3d one..
i'd use the EU site and change your address to yours in Indonesia
Hi , How about a video on Motor home detailing ? We have lots off them in England and Caravans , I cleaned them so some tips that would be great, regards Ian
Great suggestion! - Speed would be the best product for those jobs - one and done! - Yancy
Awesome products no dust I liked allot
Thanks for sharing - Yancy
Hello guys Wayne from Queensland, Australia in the great city of Brisbane 😁
what would you use take out fine scratches from gelcoat
Rotary with a purple wool pad from Lake Country. Use 3D1. Go hard until they’re gone. Don’t wipe it just change to a soft foam pad and do 3-4 medium pressure passes to finish it out
The Detailing Guy South Africa. Can 3D 510 ACa be used on self healing paint like what you get in a Nissan GTR . I believe it is called scratch guard
Hi Yancy, can you share the link to 3D Forum Mike was talking about? Tia
Here you go - www.3ddetailtalk.com/threads/3ds-alpha-ceramic-alumina-products-whats-the-difference-between-aca-and-aat-abrasive-technology.154/
한국팬들을 위해 자막 부탁드려요
Aca 500 과 aca 510 차이와
스피드를 사용하고 세라믹 코팅이 가능한건지 궁금합니다
510 for hard clear (more cutting power), although Mike said it can be used on medium toward soft clear. Speed not advisable used if you want to ceramic coat your car. The wax will interfere the bonding between the coating and the paint.
Oh and when is the glass polish being released
VEEEEERRRRRRRYYYYYYYYY Soon! stay tuned! - Yancy
@@3DCarCare I'm getting it as soon as it comes out. Might as well have a gallon ready also to go with the spray bottle. I was checking on my carpro glass compound. And wouldn't you know it. I found it turned over somehow and it spilled right into the drain. Huh! Couldn't believe it. Oh well! I'm just going to have to wait until 3D releases their new glass polish compound thing a ma jigger. Darn it!
awesome job mike
30:10 a boat pad?
Hello Sir
My self Rajinder Singh
From Stockton CA
My question can I do Ceramic Coating after Poxy Wax.
Please reply
Ik i aint a profesional but I believe the obvious answer is no. I am not a veteran in this work, more of a hobbyist, but a wax would probably stop it from actually creating a proper coat. Please correct me if im wrong.
You need to remove the wax before doing any ceramic coating
Lol seriously
From Guatemala
Bruce- lake city, fl
Zach in Jacksonville Florida
GDAY from moulamein nsw australia
IAM A DETAILER IN TEXAS ARE THESE PRODUCTS GOOD FOR RVs LIKE. CUTTING HARD OXIDATION
Yes they are and SPEED for the ones that are not severely scratched up. - Yancy
Mmmmmmmm I mean I love 510/520 but no dusting isn’t true. 510 dusts a lot. Good stuff though.
Akron,OH
Pro-Clean Auto Spa in Republic of Trinidad & 🇹🇹
Trinidad & Tobago 🇹🇹
Thanks for watching - Yancy
Is 3D Mike’s company?
No - I work for 3D. I left Autogeek back in July of 2021 due to the toxic work environment the new owner created and allowed to continue. -Mike Phillips
Happy your at 3D hope all is good for ya
Miss you Mike
Camera guy sounds like Neil Goldman from Family Guy! 🥴
This could be a 10-minute video
OKAY 3D. I HAVE A CHALLENGE. DIAMOND PLATE. 3D SO FAR DOESN'T HAVE ANYTHING FOR METAL POLISH. WELL THAT I KNOW OF. IT WOULD BE NICE TO SEE 3D COME OUT WITH A METAL POLISH SYSTEM. CHROME, DIAMOND PLATE ETC
We have a metal polish - 3dproducts.com/collections/metal-chrome/products/3d-metal-polish-restorer-protectant - Yancy
gday ellas mick australia
Joe PONTE , Toronto Ont Canada
Anabella Arzú formó Guatemala
👍🏻🤝
R.J. Vermont
Sigmund mckenzie guyana