Sometimes you have to set the phone back on the base after clearing it and press and hold the "find handset" button until the phone message changes to registering. Then you wait 30 seconds or for a beeping sound and it will be reset.
Set the phone on the base. Then press and hold the "find handset button". You may need a new handset. I sell them for $1.99 plus shipping on eBay. www.ebay.com/itm/302841806569
Thank you!!!! Trying to register a CS5229 additional handset and got no where (other than having to watch countless you tube videos). Your video did it! Thanks!!
This worked perfect for me. The only things I had to do after completing all the steps to unregister the phone was disconnect the battery. Once I unplugged the battery and plugged it back in, then I received the To Register option. At that time I completed the To Register process as demonstrated. Thanks very much!!! :)
thanks so much for the video i got it to work thanks so much i can't afford much so getting a new phone was out of the question but because of your video i was able to get it working again thanks so much you have no idea how blessed i am may god keep you and your family safe and healthy
I got the message, " out of range or no power to base " message on my CS6114. I followed the vtech six step method to correct and didn't work. I followed your step by step method " Menu, *7890#, etc.. Got it to prompt to register. Had to do it a couple of times, but, it finally registered it. I did it with a CS6114 base, which is the plain model of the one you did it on in the video. Thanks a bunch! Your method worked for me.
Thanks Bro!!! Worked like a charm. Glad I saw this video cause I almost sent the phone back. I bought a replacement for my cs6719 base/phone and had 2 existing cs6709 expansion phones. The 2 expansions both showed "no pwr to base or out of range" until I followed your video!
Great video Anthony! I just bought a CS-6114 off ebay which continually gave the 'no base power or out of range', no matter what I tried but these steps did the trick. THANKS!!!
Thanks a mill! I was about to give up all hope until I came upon your page. All the other suggestions amounted to bupkess. Had the V-Tech Dect 6.0 w/Answering machine base for years until the volume increase on the handset stopped working. I was unable to hear the person clearly on the other end. So rather than spend twice as much for the answering machine version, I simply purchased the regular one. Low and behold, I received the same message. I assumed they were automatically compatible? I guess not. Thanks again.
I initially had an out of range message and your directions got me through to the Registering message on the screen, but that's where it seems to be getting stuck. For about 2 to 5 minutes it shows that, sometimes the in use light flashes during the process, sometimes not, then it eventually reverts back to see manual. Press #, rinse repeat...What to do?
very helpful video. i lost my old vtech phone of like 6 years and bought a new one and it still paired up. mine is a different model and still programs the same. thx for posting
I have model CS6329-3. I tried clearing the handset several times but it is not working because it never gets to the register handset option. Any help would be appreciated.
On the CS6114 with no answering machine and no "in use" light, I did the codes and cleared registration. It wouldn't register kept saying failed and to see manual for registration. Wouldnt let me enter the menu or anything. When the screen went back to "To register handset, see manual" I pressed the find handset button for 4 seconds then pressed the # key on the phone while it was off base. Registered perfectly. THANK YOU for the codes and steps! I spent two hours trying to register my 2nd cordles phone to the base unti I came across your video!!!
I bought a Vtech CS6314 (identical in appearance to the one in video) but messaged: “no line”. Changed the wall plug, “no line” still! Saw your video and can get to point where message is: “registering” but cannot press talk and get dial tone. Any suggestions? I don’t think it’s due to a faulty phone line. Thanks.
May God bless you for the "secret codes" procedure which I did not see in my manual for out CS6519 model. It worked but tell me if I have it right: Take the phone handset off the charging cradle and hit Menu/Select (it's the top right on CS6519) then star (*), 7, 8, 9, 0 #. Then the phone menu screen should says Test Base. Then scroll up (on my model it is the top of the middle button which says Volume and CID) so that it says Test hand set and then hit the menu button which should result in SW version. Scroll up until it says Net page. Then hit Menu which should result in Registration clear. Hit menu again to confirm and which should result in a confirmation beep (I am not sure if I pressed the middle Volume button to do this). Then click Off (and make sure no other VTech phone is in use) and place the phone in the charging cradle and. (ignore the "see manual") hold down the Find Handset button for about 4 seconds until you see the phone saying "Registering." And then take a break and in a few minutes it should be registered and working. Or (the video says) you can pick the phone up and press star to start the registration. We have 3 VTech phones, and to get all 3 working at the same time took some searching. Thank God for your heart to help.
Thanks for this video I want to tell others that these steps also work for the model cs6114-2 programming since the company does not say this type of programming but only pressing to search the # key only once menu then * 7890 # delete record to start the search do not leave pressed
Help, I followed through for the reset, this is a new phone for me, and the screen keeps saying no line…. So I ordered a dsl attachment for it,,, but still not receiving??? I’m lost
Hello Antony, thank you for this video. I would like to know if you can help me. How can I reset (factory) the base? I need to pair 4 differents headsets and my base is already register in old salvage headsets. What should I do? Thank you!
I've tried a few times to register my phone & have unplugged it & done this several times but all it does is say its registering then says failed. Am I doing something wrong or is the phone just needing to be replaced
There is no difference in handset. The difference is that when the 6114 was made it was meant to go in a package with only one phone. The 6124 is meant for a double phone package. But they are exchangeable and work with any base. The "no line" means it needs to be reset again. Sometimes you have to follow this process a few times before it works and sometimes you have to put the phone on the base and hold the "find handset" button until it resets.
Gracias por este video quiero decirle a los demas que estos pasos tambien funcionan para el modelo cs6114-2 programacion ya que la compañia no dice este tipo de programacion pero solo presionando para buscar una sola vez la tecla # menú luego * 7890 # borrar registro para inicial la busqueda no dejen presionado
Can I register a different VTech phone to my VTech LS6375-3? To explain further, I found a VTech phone with the base, but it's not the main base, and it doesn't actually fit into my LS6375-3 main base cuz of how it is made differently - it doesn't have that extra opening in the place where it plugs into the base! Is there a way to connect it to this other model of VTech if it won't fit into any of the LS6375-3 bases? Like I said, I have the other base for this other phone, but no model number that I can see on it? Or should I just get rid of this extra phone and base because it won't work if I can't plug it into the same base as my LS6375-3???
I fallow all what you did too my phone in case the same one you have in the video. It is still not resistering too the base. I did both the base and the head set and still noting.i need help
went through your procedure with 7 phones, was successful with 4 of them, at the end of procedure 3 of them, on the handset, said "failed", what to do?
Well Anthony. I have been trying your process for about a week .I unplugged the battery and I finally got to the Registering phase and there it broke down. I received Failed message and then Not Registered. I did this repeatedly. Any suggestions on how I can remedy this situation?
How can we increase number of rings before it goes to voicemail?? The phone rings 3 times then goes to answering machine.. Annoying because I cant get to the phone quick enough sometimes.. I know we can turn the ANS. off but for Gods sake I would like to have the option to have more rings perhaps 7 or 8 rings then ANS machine.. Any ideas?? Thanks!
It didn't work on a cs6529-26. The base have the light going on and off all the time. I was able to clear the phones handsets (have to handsets) and still can't make it registrated. The wird thing is that both came in the same box with the base.
@@kavitamurthy3601 Perhaps you just need a new one. I sell them for less than $6 on ebay. www.ebay.com/itm/VTech-CS6114-Cordless-Phone-Replacement-Handset-Works-w-CS6124-CS6114-Bases/302841806569?epid=3021967980&hash=item4682c73ee9:g:Fk8AAOSwrUhbcHIt:sc:USPSFirstClass!67216!US!-1:rk:3:pf:0
Sometimes you have to set the phone back on the base after clearing it and press and hold the "find handset" button until the phone message changes to registering. Then you wait 30 seconds or for a beeping sound and it will be reset.
It say to reg hand set see manual, I didit all night but nothing
Set the phone on the base. Then press and hold the "find handset button". You may need a new handset. I sell them for $1.99 plus shipping on eBay. www.ebay.com/itm/302841806569
@@2012happens I don't have a FIND handset ???? :(
Thanks Anthony. I'm not one of your customers but I'm watching from Mexico and your video helped me fix my phone 👍 Awesome
I work at a long term care facilty and many residents have this model and exact problem. This fixed the out of range issues completely. Thanks alot
Perfect! Very rare advice from youtubers are this on point and easy to follow. THANK YOU
Thank you!!!! Trying to register a CS5229 additional handset and got no where (other than having to watch countless you tube videos). Your video did it! Thanks!!
Old but still helpful. I have a ton of these in my office and if course handset and bases die... So glad i found this video.
This worked perfect for me. The only things I had to do after completing all the steps to unregister the phone was disconnect the battery. Once I unplugged the battery and plugged it back in, then I received the To Register option. At that time I completed the To Register process as demonstrated. Thanks very much!!! :)
He is right exactly. Unplug wait 30 seconds to 1 minute plug back in and start where video left off. Thanks for comment.
It's not working
thanks so much for the video i got it to work thanks so much i can't afford much so getting a new phone was out of the question but because of your video i was able to get it working again thanks so much you have no idea how blessed i am may god keep you and your family safe and healthy
bro very good video although I'm from Latin America I understood your video perfectly and it helped me a lot with my problems many successes brother
This worked much better than reading the company manuals.
Thanks boss, followed instructions from the manual exactly and couldn’t get them to work, this video did the trick
I got the message, " out of range or no power to base " message on my CS6114. I followed the vtech six step method to correct and didn't work. I followed your step by step method " Menu, *7890#, etc.. Got it to prompt to register. Had to do it a couple of times, but, it finally registered it. I did it with a CS6114 base, which is the plain model of the one you did it on in the video. Thanks a bunch! Your method worked for me.
Thanks so much. Exactly what I was looking for!
Thanks Bro!!! Worked like a charm. Glad I saw this video cause I almost sent the phone back. I bought a replacement for my cs6719 base/phone and had 2 existing cs6709 expansion phones. The 2 expansions both showed "no pwr to base or out of range" until I followed your video!
*7890#, at 0:43, is not something I would have figured out. Thanks for making this video!
Great video Anthony! I just bought a CS-6114 off ebay which continually gave the 'no base power or out of range', no matter what I tried but these steps did the trick. THANKS!!!
Tried it with both phones did not work. Just keeps on saying registering.
Same
Me too
Thanks…that worked!!! I had almost given up!
Didn't work. I got so far where it says "registering..." then after about 2 minutes, it says Failed - see manual
Me too
Great step by step instructions
I was just doing a phone install and I’m so glad I found this video
Thank you. This was a big help! My phone is working now.
Thank you so much. this is great help
AMAZING JOB BROTHER!!
Thank you soooo much!
Worked perfectly. I need this for setting up a remote camp site. Many thanks, dood.
This worked!!! Thank you!!
Thank you so much man... You are the man... It did worked just great
Thanks a mill! I was about to give up all hope until I came upon your page. All the other suggestions amounted to bupkess. Had the V-Tech Dect 6.0 w/Answering machine base for years until the volume increase on the handset stopped working. I was unable to hear the person clearly on the other end. So rather than spend twice as much for the answering machine version, I simply purchased the regular one. Low and behold, I received the same message. I assumed they were automatically compatible? I guess not. Thanks again.
Thank you so much, your video was a big help!!!
Thank god lol I been trying to figure this out. I was about to buy a new cordless phone until I seen this video! Thank you !
Does this help if the display has Line In use and the base line in use is flashing
I initially had an out of range message and your directions got me through to the Registering message on the screen, but that's where it seems to be getting stuck. For about 2 to 5 minutes it shows that, sometimes the in use light flashes during the process, sometimes not, then it eventually reverts back to see manual. Press #, rinse repeat...What to do?
very helpful video. i lost my old vtech phone of like 6 years and bought a new one and it still paired up. mine is a different model and still programs the same. thx for posting
I have model CS6329-3. I tried clearing the handset several times but it is not working because it never gets to the register handset option. Any help would be appreciated.
bro this saved my life
Can you register several handsets to a base?
On the CS6114 with no answering machine and no "in use" light, I did the codes and cleared registration. It wouldn't register kept saying failed and to see manual for registration. Wouldnt let me enter the menu or anything. When the screen went back to "To register handset, see manual" I pressed the find handset button for 4 seconds then pressed the # key on the phone while it was off base. Registered perfectly. THANK YOU for the codes and steps! I spent two hours trying to register my 2nd cordles phone to the base unti I came across your video!!!
It actually worked. Thank you.
Took a couple of times but it works thanks
it’s workssssss!!!! thanxxx so much!
I bought a Vtech CS6314 (identical in appearance to the one in video) but messaged: “no line”. Changed the wall plug, “no line” still! Saw your video and can get to point where message is: “registering” but cannot press talk and get dial tone. Any suggestions? I don’t think it’s due to a faulty phone line.
Thanks.
Had to try it several times, but it worked! Thank you!
Muchas gracias 🙏
Fue de mucha ayuda
Esta información debería de estar en el manual
If you got a ehco in your handset phone how do you fix it
legit super useful thankyou so much
Thank you for this
I have a question my phone keeps making a beep noise when I call.
May God bless you for the "secret codes" procedure which I did not see in my manual for out CS6519 model. It worked but tell me if I have it right:
Take the phone handset off the charging cradle and hit Menu/Select (it's the top right on CS6519) then star (*), 7, 8, 9, 0 #. Then the phone menu screen should says Test Base. Then scroll up (on my model it is the top of the middle button which says Volume and CID) so that it says Test hand set and then hit the menu button which should result in SW version. Scroll up until it says Net page. Then hit Menu which should result in Registration clear. Hit menu again to confirm and which should result in a confirmation beep (I am not sure if I pressed the middle Volume button to do this).
Then click Off (and make sure no other VTech phone is in use) and place the phone in the charging cradle and. (ignore the "see manual") hold down the Find Handset button for about 4 seconds until you see the phone saying "Registering." And then take a break and in a few minutes it should be registered and working. Or (the video says) you can pick the phone up and press star to start the registration.
We have 3 VTech phones, and to get all 3 working at the same time took some searching. Thank God for your heart to help.
Thanks for this video I want to tell others that these steps also work for the model cs6114-2 programming since the company does not say this type of programming but only pressing to search the # key only once
menu then * 7890 # delete record
to start the search do not leave pressed
you're the best
Thanks so much your a genius and now my mom has 2 phones :)
Thank you 😊
Can you pair these to a Motorola base?
5years later thankyouu def worked!
Thank you very much, excellent greetings from Ecuador.
Funciona al 100% recomendado.
Help, I followed through for the reset, this is a new phone for me, and the screen keeps saying no line…. So I ordered a dsl attachment for it,,, but still not receiving??? I’m lost
After hitting Menu Select it still shows on the screen Out of Range or No pwr at Base
Does this also work for a cs6929-2?
Hello Antony, thank you for this video. I would like to know if you can help me. How can I reset (factory) the base? I need to pair 4 differents headsets and my base is already register in old salvage headsets. What should I do? Thank you!
So follow the instructions and press "ok" when it says "base" instead of "handset"
I can't get my phone to register the second phone
Hi do you know how to troubleshoot the vtech VT1301 too??
ty for posting, it really helped
Si me funcionó. Gracias
Hi, is there is any speaker in this model
I've tried a few times to register my phone & have unplugged it & done this several times but all it does is say its registering then says failed. Am I doing something wrong or is the phone just needing to be replaced
1 of my handset says model cs6114 and the other 6124. how can i pair them together the 6114 say no line in display window.
There is no difference in handset. The difference is that when the 6114 was made it was meant to go in a package with only one phone. The 6124 is meant for a double phone package. But they are exchangeable and work with any base. The "no line" means it needs to be reset again. Sometimes you have to follow this process a few times before it works and sometimes you have to put the phone on the base and hold the "find handset" button until it resets.
Me same
Worked for me. Thanks a lot.
Gracias por este video quiero decirle a los demas que estos pasos tambien funcionan para el modelo cs6114-2 programacion ya que la compañia no dice este tipo de programacion pero solo presionando para buscar una sola vez la tecla #
menú luego * 7890 # borrar registro
para inicial la busqueda no dejen presionado
Disculpa no se inglés y me pasa lo mismo con mi teléfono nuevo vtech cs5119 ...a que se deve
Can I register a different VTech phone to my VTech LS6375-3? To explain further, I found a VTech phone with the base, but it's not the main base, and it doesn't actually fit into my LS6375-3 main base cuz of how it is made differently - it doesn't have that extra opening in the place where it plugs into the base! Is there a way to connect it to this other model of VTech if it won't fit into any of the LS6375-3 bases? Like I said, I have the other base for this other phone, but no model number that I can see on it? Or should I just get rid of this extra phone and base because it won't work if I can't plug it into the same base as my LS6375-3???
Thanks 👍
What happens when you have two handsets as it will only register one
How do you turn the ringer off / on
Sadly not working for me and I need help!!!!
I fallow all what you did too my phone in case the same one you have in the video. It is still not resistering too the base. I did both the base and the head set and still noting.i need help
This did the job!
went through your procedure with 7 phones, was successful with 4 of them, at the end of procedure 3 of them, on the handset, said "failed", what to do?
Thank you so mucho. It worked perfectly
Thank you Thank you!! Here's Positive feedback! it worked! Some easy instructions that I could do!
Hmm i tried it several times it takes a while saying registering and i get a failed msg
Do you have these for sale
Mine beeps twice as if it’s dialing out but no calls are going out I nnnneeeedddd help
Well Anthony. I have been trying your process for about a week .I unplugged the battery and I finally got to the Registering phase and there it broke down. I received Failed message and then Not Registered. I did this repeatedly. Any suggestions on how I can remedy this situation?
Me paso lo mismo lo solucionaste?
Keep getting "register failed". Vtech CS5119-2
I tried this on mines so many times an it's still not registering.what can I do😭
My CS6929 is stuck at "registering". Do I just wait until it charges?
Nope follow the steps until need to pick it up then press #
NEED HELP my handset is not sending out any calls and to make matters worst I just did all this and now its not registering.
How can we increase number of rings before it goes to voicemail?? The phone rings 3 times then goes to answering machine.. Annoying because I cant get to the phone quick enough sometimes.. I know we can turn the ANS. off but for Gods sake I would like to have the option to have more rings perhaps 7 or 8 rings then ANS machine.. Any ideas?? Thanks!
It didn't work on a cs6529-26. The base have the light going on and off all the time. I was able to clear the phones handsets (have to handsets) and still can't make it registrated. The wird thing is that both came in the same box with the base.
I have the panasonic set with talking callerid/call block
Its pretty easy for date, time and yr. use the select menu
It says HS Register I tap the # waited and it says Failed.
Have you worked with other brands of cordless phones or just vetch
At&t and Panasonic also. They all seem to work the same.
helps.thank you so much my friend
This definitely worked.. Thanks man
Do this V Tech 6.0 have a speaker phone on it
Hello Anthony. Nothing happens when I press Menu button the handset.
Go ahead and press the "OFF" button a few times to reset your phone. Then try the "MENU" button. :-)
@@2012happens Thanks for your reply, Anthony. Tried your suggestion but no luck. Perhaps the circuit is gone.
@@kavitamurthy3601 Perhaps you just need a new one. I sell them for less than $6 on ebay. www.ebay.com/itm/VTech-CS6114-Cordless-Phone-Replacement-Handset-Works-w-CS6124-CS6114-Bases/302841806569?epid=3021967980&hash=item4682c73ee9:g:Fk8AAOSwrUhbcHIt:sc:USPSFirstClass!67216!US!-1:rk:3:pf:0
@@2012happens Sounds good!! Thanks :)
Thank you for the sale. I'll make sure its ready to pair when it gets to you. Hopefully you wont have to come back to this video. :-)
how to set date and time
On my phone it’s keep saying see Manuel and registering hs
I tried your method more than a half dozen times and it still doesn't work. What else can I do?
Cómo sé le puede mover pará k salga el número dé quién está marcado