THANK YOU SOOOOOOOO MUCH!!!!!!!!!!!!! I can scarcely find the words to tell you how grateful I am. Even the VTech website was useless. I also couldn't locate landline repair technicians to come to my home to help me. I was so frustrated and anxious, I was actually suffering physically from the stress. My phone was not functioning for two weeks, but your video helped me in less than five minutes !! Bless your sweet soul. Thank you for your wise and useful advice. You now have a new subscriber !!
i am losing my mind. no phone svc billing not an issue nobody will call me and i have been without a phone for 2 wks am senior citizen and i find this frigtening dont know what to do and i cannot call anybody. im caught on a never ending wheel
My husband and I really enjoyed this video. The information that you provided was very easy to understand and very helpful. We were able to fix our house phone, that we thought was broken. We are very happy that our house phone is working now, thanks to your wonderful video. Thank you again for this information. Good Luck to you with your future endeavors!!!
I am quite grateful for your video. I looked for information in Vtech but totally nefarious. With your video I was able to solve the problem of the telephones. Greetings from Mexico.
Thank you so much for the help. Got a new phone set & the extra phone wasn't synced in. Followed your directions & it worked! You are amazing! Thank you so much! I always turn to TH-cam for problems & usually get the answers I need! Peggy in KY
My dad came with a new phone and he was desesperated because it wasn't working, he doesn't speak english but lucky I do. Thanks a lot man, now we have a new beautiful working phone 🥰
Lifesaver. I bought a used Ebay handest and when it wouldn't connect I thought, "Well, that's $10 I flushed down the toilet." So good on you for the help :)
To get my 4 needed handsets, I had to buy 2 phone sets with 2 bases. After a lot of playing and searching, I found this video. The trick was to deregister the 2 handsets from the one base then register them with the other base. Thank you for the help.
Move from 1 house to another and 5 phones had same problem.. Thx for the inside tip! Wasn't about to call Panasonic.. All are back working, thanks to you!
I was able to use these steps with the cs6609/ cs6649. Screen wording may vary a little but it worked. Thanks for the code. You saved me a phone I would have trashed.
For an older less tech savvy person, like myself, this was great! I'd gotten another handset from Goodwill and couldn't get it sync or . . . register. De-Registering first ?!? Thanks a million !!
Another tip is to remove all batteries from all phones, press the "find Handset" button until the light comes on, then press and hold it again until it flashes for about 7 seconds. This will de-register all phones at one time. This is according to my model's manual. It worked but I am still having problems registering the handsets.
excellent tutorial. I don't have the manual and was about to give up b/c I would have never figures this out without one. thanks for the great information!
Hello. Can you check the inscriptions on its AC adapter, does it say 110-240 volts? I know that socket plug type is US but I need to know if it supports 220 volts. SImply should state 110-240 volts.
i have tried this .. and it says REgistering.. however. if takes a bit of time... but then says 'to register.. see manual' .. which is the same as this.. WHY would the handset not be registereing to the base? battery is charged...i go thru comwave.. i un-registered the phone. thanks
I have a phone of the same model. I already did the mentioned steps and it still does not detect the base. I get a sign that says: To register HS see manual. what can I do to make it work?
Thanks, it worked very well for me ! But it just confirmed that they sold me a kind of refurbished set of 3 phones instead of new, like supposed to be !
After i deregistered it it still said the same thing and then i plugged it in and pressed buttons and it didn't register.... Maybe i have a different issue?
I got "new" phones from the store and had this issue, ur fix got one working , however I cannot get the secondary phone to register. It says registration failed
My phone was dropped in a glass of water. Now won't work, keeps saying either out of range or no pwr (minus the o and e} at base. Bought a new battery, still the same. Any suggestions?
Hello, sorry, I have an at & t e5813b and I can't make it connect to the base, the screen says another headset is on or out of range, can you help me please
Levantas el teléfono, le das a menú, luego presiona *7890#, cuando aparezca TEST HANDSET presiona menú, luego la flecha hacia arriba hasta que aparezca REGSTR CLEAR, le das menú para confirmar, después que aparezca OK, pones el teléfono en la base y espera 10 segundos hasta que lo registre
purchased a 3 hand set radio shack phone. when it came only one of the 3 hand sets will work. 2 of them wont go past the connecting mode. i noticed inside battery compartment that the phone that does work is a cat 43-325 and the 2 that dont work are cat 43-327.....im assuming that means they belong to a different base. i tried to unregister and then re register but the phones wont come out of "connecting mode.even when pulling the battery and reinstalling .....any ideas ?
Disconnect battery after the clear and it should reset. I tried 3 times no success until I took the battery out the headset, waited 10 secs or so and put it back in.
I have 2 different sets and both have problems - one base keeps giving no power at base and the phones all show failed when trying to register. The other one registers the phones but none of the phones will give a dial tone. Four separate phones and none work with either of the bases - it seems the bases are the problem.
THANK YOU SOOOOOOOO MUCH!!!!!!!!!!!!! I can scarcely find the words to tell you how grateful I am. Even the VTech website was useless. I also couldn't locate landline repair technicians to come to my home to help me. I was so frustrated and anxious, I was actually suffering physically from the stress. My phone was not functioning for two weeks, but your video helped me in less than five minutes !! Bless your sweet soul. Thank you for your wise and useful advice. You now have a new subscriber !!
i am losing my mind. no phone svc billing not an issue nobody will call me and i have been without a phone for 2 wks am senior citizen and i find this frigtening
dont know what to do and i cannot call anybody. im caught on a never ending wheel
ive 2 wks without a phone. im a senior citizen and this frightens me
i cant get anyone to help. im very frustrated and i dont know where to turn
My husband and I really enjoyed this video. The information that you provided was very easy to understand and very helpful.
We were able to fix our house phone, that we thought was broken. We are very happy that our house phone is working now, thanks to your wonderful video. Thank you again for this information. Good Luck to you with your future endeavors!!!
Iq😂❤❤❤❤ooo
I am quite grateful for your video.
I looked for information in Vtech but totally nefarious.
With your video I was able to solve the problem of the telephones.
Greetings from Mexico.
Thank you so much for the help. Got a new phone set & the extra phone wasn't synced in. Followed your directions & it worked! You are amazing! Thank you so much! I always turn to TH-cam for problems & usually get the answers I need! Peggy in KY
My dad came with a new phone and he was desesperated because it wasn't working, he doesn't speak english but lucky I do. Thanks a lot man, now we have a new beautiful working phone 🥰
Lifesaver. I bought a used Ebay handest and when it wouldn't connect I thought, "Well, that's $10 I flushed down the toilet." So good on you for the help :)
To get my 4 needed handsets, I had to buy 2 phone sets with 2 bases. After a lot of playing and searching, I found this video. The trick was to deregister the 2 handsets from the one base then register them with the other base. Thank you for the help.
Thank you so much for uploading this video. I spent a lot of frustrating time searching for this procedure. It worked beautifully.
Move from 1 house to another and 5 phones had same problem.. Thx for the inside tip! Wasn't about to call Panasonic.. All are back working, thanks to you!
Thanks for that, very straight forward instructions and easy to follow, your a life saver
I was able to use these steps with the cs6609/ cs6649. Screen wording may vary a little but it worked. Thanks for the code. You saved me a phone I would have trashed.
Thank you for this instructional video. Why Vtech doesn't have this info available is beyond me. This worked on a DS6072 and DS6771-3 handset.
For an older less tech savvy person, like myself, this was great! I'd gotten another handset from Goodwill and couldn't get it sync or . . . register. De-Registering first ?!? Thanks a million !!
Thank you so much. Easy to understand directions. 🙏🏾
brooo you saved me from having to buy a new cordless, thanks a bunch 😭😭😭😭😭
Thanks for the information 👍 you just saved me a lot of heartache.
It worked for me.... thank you very much.
I almost threw out my old hand set.
Hi!!I can go as far as the "registering" stage but it says "Failed"..won't register!!..wha am I doing wrong??
Thank you so much crazy works great thing is the lady got her phone brand new at Walmart and it still did this
Thanks your tutorial was very helpful.
Thank you very much for this tutorial. I had that problem and now I was able to configure it.
Thanks, how to fix the handsets of the vtech doorbell is7121 ; they are either out of range or no power at the base? Any code to fix the issue?
Thanks bro, you just made me a hero at my workplace🤗
Thank you so much, it worked perfectly for my mom's old phones.
Thank you! Worked perfectly.
Another tip is to remove all batteries from all phones, press the "find Handset" button until the light comes on, then press and hold it again until it flashes for about 7 seconds. This will de-register all phones at one time. This is according to my model's manual. It worked but I am still having problems registering the handsets.
Thank you! Just what I needed and couldn’t find anywhere!
Thank you very much for this video. I was able to solve that problem with my phone
Gracias! Seguí indicaciones y mi teléfono ya funciona.
Hola me podrías ayudar pero en español porfa!
excellent tutorial. I don't have the manual and was about to give up b/c I would have never figures this out without one. thanks for the great information!
Muchas Gracias Amigo, tu video fue de mucha ayuda, saludos desde Guatemala, Centroamerica.
This was so helpful. It worked. Thank you!
Thank you very much. This video solved the issue I was experiencing!
I love you! You’re a life saver
Thank you very much, help me with the problem and can solve it, well explained
Had to do this last night and it worked
Your instructions worked perfectly Thanks Bunches!
It sure helped me, Thank you
Thanks for this video it worked
Thanks for the video man is a great help.
Hello. Can you check the inscriptions on its AC adapter, does it say 110-240 volts? I know that socket plug type is US but I need to know if it supports 220 volts. SImply should state 110-240 volts.
what if it say register failed
i have tried this .. and it says REgistering.. however. if takes a bit of time... but then says 'to register.. see manual' .. which is the same as this.. WHY would the handset not be registereing to the base? battery is charged...i go thru comwave.. i un-registered the phone. thanks
Had to do mine 6 times before it took. Make sure you deregister all the phones first, because the max phones are 5, the list needs to be cleared first
I have a phone of the same model. I already did the mentioned steps and it still does not detect the base. I get a sign that says: To register HS see manual. what can I do to make it work?
Thank you it worked kool attitude my friend.
Thank You. It's a real shame that both of the manuals (Full & Abridged) don't explain this. It just does NOT make any sense.
Thanks, it worked very well for me ! But it just confirmed that they sold me a kind of refurbished set of 3 phones instead of new, like supposed to be !
Does the mute button on the handset stay lit after you press it?
THANK YOU! It worked great!!!
thank you very much mine was not refurbished and was doing that
After i deregistered it it still said the same thing and then i plugged it in and pressed buttons and it didn't register.... Maybe i have a different issue?
Hi Anthony. I was wondering do you do the same steps if you have more than one V Tech phone? Because the one we bought has two phones and two bases.
Using the method in your tutorial worked for the phone in the master bedroom but Im having trouble with the one in the kitchen.
It worked thanks now I need register it to the same base now it says no line
A lot of problems with the speaker aspect. It echo's and makes noises. Can you help me with that part
Thanks!! Worked perfectly after 2 tries.
I got "new" phones from the store and had this issue, ur fix got one working , however I cannot get the secondary phone to register. It says registration failed
My phone was dropped in a glass of water. Now won't work, keeps saying either out of range or no pwr (minus the o and e} at base. Bought a new battery, still the same. Any suggestions?
I've got a CS 6071 that won't let me get to the menu point of this procedure.
Mine didn't pull up that menu at the end when I exited 😢
Question my phone doesn't have any registered clear been searching
Hello, sorry, I have an at & t e5813b and I can't make it connect to the base, the screen says another headset is on or out of range, can you help me please
Worked perfectly.
Mine gets stuck on "registering..." for a while and then goes back to "to register handset see manual" :c
same
Same
Same
Same. Anyone figure this out?
Same
Very useful, thank you very much!
You saves the day!
Muchas Gracias! Desde Argentina
when charging dose the base need both cords because I only have the power cord in and its flashes but it dosent charge
Puede dar la explicación en español no entiendo como repararlo tiene el. Mismo problema desde Ecuador gracias
Levantas el teléfono, le das a menú, luego presiona *7890#, cuando aparezca TEST HANDSET presiona menú, luego la flecha hacia arriba hasta que aparezca REGSTR CLEAR, le das menú para confirmar, después que aparezca OK, pones el teléfono en la base y espera 10 segundos hasta que lo registre
@@arthuro2223 Muchísimas gracias,, me ayudo bastante tu comentario en español 🙏
@@Fun_bot_phase_3 A la orden!
If you place the handset on the base after resetting it... then press and hold the "find handset" button it will sometimes automatically register.
It worked thanks
Ese es mi modelo pero en rojo y no quiere registrarse ayuda por favor 🙏
purchased a 3 hand set radio shack phone. when it came only one of the 3 hand sets will work. 2 of them wont go past the connecting mode. i noticed inside battery compartment that the phone that does work is a cat 43-325 and the 2 that dont work are cat 43-327.....im assuming that means they belong to a different base. i tried to unregister and then re register but the phones wont come out of "connecting mode.even when pulling the battery and reinstalling .....any ideas ?
I've got a CS6529-3 that this doesn't seem to work for... Is there a different process for that model?
Disconnect battery after the clear and it should reset. I tried 3 times no success until I took the battery out the headset, waited 10 secs or so and put it back in.
Thanks bro 👍
Hi master, mi phone not charging, I change the phone in other base is good work, what happens? Thank you
I have 2 different sets and both have problems - one base keeps giving no power at base and the phones all show failed when trying to register. The other one registers the phones but none of the phones will give a dial tone. Four separate phones and none work with either of the bases - it seems the bases are the problem.
HOLA ..COMPRE EL TELEFONOCS69192.EN WALMART EN NEWARK Y NO VENIA LA BASE PEQUEÑA DONDE LA PUEDO COMPRAR EN COSTA RICA...ME URGE...GRACIAS
What do you do when the inuse button and the on/off inuse button blinks phone doesn't work?
Then its probably time to buy a new handset. You can get one on eBay for about $10
Para enlazar el teléfono a la Base como se hace
Thank you!
I've tried multiple times and I keep getting a failed message? Any other tips?
Same
Mines says registration failed see manual, can you make a video for if it says failed
This is that video. You have to reset the handset again. 🙂 sometimes it takes a few tries.
It is the same with my phone😣, I have done that at least 8 times
Mines doing the same thing. Failed
Tried 5 times
Same with mine I’ve done more than 15 times still not working
Y porque no das la clave que le pones al último
You rock, thanks so much.
Excellent
No lo puede traducir al español?
What if it said failed?
struggling with mine uhg!
Thank you so much for this.
Why it doesn't work for mine? It read failed though I tried many times
Joy Lee when you type in the numbers and all that it has to be fluid
Thank you¡! It worked very well...
This method will works!
Why can't the manual be as clear as you?? Thanks again.
Thanks!
Mine won’t register, it’s in the base and says registering
mine does say phone book when i press the button it goes to straight to play messages.
can you help?
mine doesnt say phone book i mean
its says play messages
Excelent Men
thank you! it worked!
Mines still says unable to register
The options for me are not the same.
My phone says Line in use and there is no way that I can errase that error message. Does anybody else had a similar problem?