Fantastic! I was recommended this compressor from a friend a fortnight ago. It arrived a few days back and of all the possible videos that could have been up the top of my subscriptions was this! Just learnt a lot of great info! Thanks so much :)
To avoid air leaks on the moisture trap use a bit of teflon tape. I had mine for years and it does the job. The tank is a bit small but works well for many small jobs. Watch out for rust on the bottom screws and the black paint on the cover is a bit fragile.... Always drain the tank to avoid moisture build-up and therefore, rust.
I've had the previous generation Sparmax model for about 7 years now. It doesn't have the casing like this model but I can't see any other significant differences. Still working perfectly. I would add that contacting the company for spare parts is virtually impossible. It fell off the bench (due to the vibrations! now I clamp it to the bench when using it) and the connection between the gauge and the pump broke. This was an easy part to get hold of though. I would prefer it if the gauge was protected by the casing a little more.
Paul if you undo the dream plug after a session then run the pump for a minute after you empty the tank the blow though all the cold / damp decompressed air is also a good idea
Hello there! I'm in the market for a compressor - it'll be my first ever one. I want to avoid getting the cheap and (not so) cheerful Chinese mass-produced ones that are available everywhere online. I'd rather pay that bit more for something that will last and serve me well. It's only for very light use with an Iwata brush. Can I ask what you would recommend and also what you're using yourself at the moment? Preferably one with a tank and I think single-piston would be more than enough for my low-level use. Look forward to reading your comments :)
uh, never blow through your airbrush at the first go. There can be metal shards from milling and welding inside. Almost all companies warm about this and if there is a couple, they will shred your hose and damage your airbrush. Always air it out twice, using the filter, before use. All companies write this.
Very informative. I have been using an iwata sprint jet for about 10 years now and ,now I'm getting pulsing through both brushes is it time for an upgrade, my brushes are a paasch vls and a badger200,150
I live in a apartment block how noisy is this? I’m looking at buying this in a bundle with cult of paint airbrush? But it can’t be to noisy, do you have any quite compressors you recommend if this one is to loud
I have the compressor Sparmax 610 Plus, but i still didnt used it because of safety questions. We open the drain plug below the tank after or before we empty the tank from air? I think the manual says to drain it with pressure in tank, but im afraid i water spits all over if the tank have air inside. Can someone help me?
Hey Paul, how you getting on the Sparmax mate? I need a compresser and don't know what to do... I guess you started with the old Chinese one, (I've been borrowing one off a mate but he's got it back now) but its about value for money. Help me.....😩
Fantastic! I was recommended this compressor from a friend a fortnight ago. It arrived a few days back and of all the possible videos that could have been up the top of my subscriptions was this! Just learnt a lot of great info! Thanks so much :)
To avoid air leaks on the moisture trap use a bit of teflon tape. I had mine for years and it does the job. The tank is a bit small but works well for many small jobs. Watch out for rust on the bottom screws and the black paint on the cover is a bit fragile.... Always drain the tank to avoid moisture build-up and therefore, rust.
I've had the previous generation Sparmax model for about 7 years now. It doesn't have the casing like this model but I can't see any other significant differences. Still working perfectly. I would add that contacting the company for spare parts is virtually impossible. It fell off the bench (due to the vibrations! now I clamp it to the bench when using it) and the connection between the gauge and the pump broke. This was an easy part to get hold of though. I would prefer it if the gauge was protected by the casing a little more.
Paul if you undo the dream plug after a session then run the pump for a minute after you empty the tank the blow though all the cold / damp decompressed air is also a good idea
Just bought one. Thanks for the great explanatory video....
Hello there! I'm in the market for a compressor - it'll be my first ever one. I want to avoid getting the cheap and (not so) cheerful Chinese mass-produced ones that are available everywhere online. I'd rather pay that bit more for something that will last and serve me well. It's only for very light use with an Iwata brush. Can I ask what you would recommend and also what you're using yourself at the moment? Preferably one with a tank and I think single-piston would be more than enough for my low-level use. Look forward to reading your comments :)
Im using this compressor, cant beat them for the money
How does the compressor hold up today?
uh, never blow through your airbrush at the first go.
There can be metal shards from milling and welding inside.
Almost all companies warm about this and if there is a couple, they will shred your hose and damage your airbrush.
Always air it out twice, using the filter, before use.
All companies write this.
Very informative. I have been using an iwata sprint jet for about 10 years now and ,now I'm getting pulsing through both brushes is it time for an upgrade, my brushes are a paasch vls and a badger200,150
These are great compressor highly recommended, thanks for watching - Paul :)
How long dose it take befor the tank starts buzzing again?
I live in a apartment block how noisy is this? I’m looking at buying this in a bundle with cult of paint airbrush? But it can’t be to noisy, do you have any quite compressors you recommend if this one is to loud
Hi! How is about warm up during work? Too much hot or can it works for long sessions? Thank’s!
Works just fine for longer sessions
@@InternationalScaleModeller thank's!
hi Paul I am looking for a new compressor I know on the video it is been 6 years do you still have the sparmax is it any good
This one is still going strong it’s owned by a friend now. I have a newer one I’ve had for a couple years and it’s still great
Guys just let you know this is Anest Iwata Sparmax.. ..so don't get fooled by someone saying it's made in china.....
should I get the SPARMAX TC-501N or TC-2000??? new to the hobby, need the best stuff
Look else qere for "the best stuff" and spend about 700 plus.
(Not remotely needed)
Nice bit of kit bud :) good price too.
I have the compressor Sparmax 610 Plus, but i still didnt used it because of safety questions. We open the drain plug below the tank after or before we empty the tank from air? I think the manual says to drain it with pressure in tank, but im afraid i water spits all over if the tank have air inside. Can someone help me?
How did it go? xD
Brilliant video.. So helpful...
These are the OIM versions of the IWATA compressors, from the looks of it ( the shell, and the moister trap)
Hey Paul, how you getting on the Sparmax mate?
I need a compresser and don't know what to do...
I guess you started with the old Chinese one, (I've been borrowing one off a mate but he's got it back now) but its about value for money. Help me.....😩
Hey Tim, its a great bit of kit, i can highly recommend it.
would I be able to connect six airbrushes to this compressor?
Where can I buy a distrubitor from output to several airbrushes?
The top part looks identical to my AC-501X?
Most of these Compressors are the same just I a different shell with a logo
Is this compressor compatible with the Iwata HP-CS?
it should, I have a small one and it came with adopters to connect my eclipse hp-cs
como puedo traer uno de estos a colombia
Aprox 25 - 30 secs