Been using the Flyer for a while. I just use it for priming and topcoats, and have extra bottles (one for each whatever). Haven't really had to clean out the bottles much since I use it for a limited purpose, but it's nice not needing to clean out my actual brush for these things. Since I prime and topcoats a lot, I just fill up a bottle and can use it for multiple kits. Been loving it for these kinds of applications.
Zach , I'd plug the compressor into a remote switch and then place that switch in a convenient location . You could do it with plastic electrical box ,ON OFF switch & Extension cord from the Hardware store.
I was skeptical about the bottlr air brushes but if you end up with a good experience it might have to be a buy awsome video btw got to chill out for a good 20 lol
As someone looking to get into airbrushing soon, what do you do with leftover paint after a paint session (assuming you aren't going to save it)? Throw it away? Pour it down the drain? I've never heard anyone mention it so I never really knew.
My Iwata Smart Jet is serving me well since I first got it with the HP-CS 2 years ago (got em both for $100 NIB off of Craig's List). But in the event of the unfortunate, I'll keep this one in mind.
Same I have a Smart Jet pro and a HP-CS as well as a 0.5 Trigger Neo for priming been using them for a few years now all 3 were great buys and I love them too. If you are ever looking for a Detail Brush give the Mr. airbrush Custom 0.18mm PS770 a go fit and finish its pretty much a Iwata Custom Micron: CM-C Plus with different markings for 2/3 the price, Not cheap by any means but cheaper then a CM-C
Although it's a joint venture between iwata and sparmax as iwata acquire them and do a bit of restructuring. It is iwata the bigger fish here swallowing airbrush companies. Same as they did with harder & steenbeck a few years ago.
I just took delivery of this same compressor today June 2020} and Im over the moon with it, I got the rust coloured one they had on a short run and it matches my best airbrush lol, though that doesnt really atter does it!, I am posting this because anyone worrying about noise need not worry, it is REALLY quiet, If you were working in one room it would not bother anyone in another room at all. The next model down {610} although the same compressor runs faster and thus is louder than this twin model, I think they back off the speed on the twin because they have two pistons working that fill the tank really quickly, so it doesnt have to work as fast or hard and is far quieter. I was going to go for the Bambi silent but honestly this is quiet enough, it's nothing like the noisy little bugger I ran years ago. I bought mine from a UK outlet, Airbrushes.com, came in one day WITH a set of rust effect paints free, great service.
Sparmax compressors are really nice, been using a TC-610H the last 5 years. I think the Flyer is really good for primer coats if you don't want to use a rattle can.
Did they airbrushes come with the set or did you buy separate? I'm looking to getting on my LHS got in the same he opened the top to show me abit before a customer came in so only saw the hose! It's only £200 it's same compressor and box just wondering if the airbrushes came with it?
I think the only thing that you would get out of the psi jump if you ever wanted to spay metallic auto flake because I know there are a few brands that have small flake well small enough to get through a 0.6mm instead of a huge industrial auto brush
F for the old compressor, also using a Flyer Airbrush for the first time is probably feeling like you're a street bike user who then tries an off-road bike, that is the only comparison i can think of, lol
I use a smart jet pro and this seemed louder but the thing you need to remember is that the smart jet has no external tank so while it is quiet it can be running longer so its a trade off of how you want your noise and the sparmax 620x tops out at around 60-65psi where as the Smart Jet Pro says tops out at just above 35psi
@@ZakuAurelius at the end of February. I'm plotting out a general itinerary. It's not major revisions right? Just some adjustments/updates right? I'll just use the older version then switch over to the updated version when it's on the website.
When it comes to compressors I believe you get what you pay for. I’d rather buy one that will last 5 years (for example) than one that lasts 2 years and have to buy another one
It's not even the most expensive compressor out there. It is literally a mid range compressor. You get what you pay for. You want a cheap 49.99 compressor then you can find one, but it isn't going to perform like a higher quality one would.
joshua hensley Hmm I wonder why a company would send me products “for free”? Almost like it’s my job that I spend 50 hours a week creating content to have an audience to showcase products to 🤔🤷♂️
Ive had this compressor 6 months and i couldnt be happier
You can't go wrong with Sparmax, I've had my compressor and airbrush for 3 years and it hasn't missed a beat, Agree with Aaron and Rhyan on this.
waiting for mine to arrive ... assembling, detailing, and painting model kits is going to be my hobby now that i have the means and time to do so
Ive been wanting to get this one! Awesome you did a review on it
Excellent vid! Thanks, Zach!
Thank you I just got one of these and this video was a really good help to understand what this thing actually is.
Nice looking at upgrading to this same compressor as well
As a ship modeller working with fairly large models the flyer makes a tonne of sense for doing waterlines and stuff.
Been using the Flyer for a while. I just use it for priming and topcoats, and have extra bottles (one for each whatever). Haven't really had to clean out the bottles much since I use it for a limited purpose, but it's nice not needing to clean out my actual brush for these things.
Since I prime and topcoats a lot, I just fill up a bottle and can use it for multiple kits. Been loving it for these kinds of applications.
That’s a good point!
Now the *Work in Progress Begins!* 😎
Zach , I'd plug the compressor into a remote switch and then place that switch in a convenient location . You could do it with plastic electrical box ,ON OFF switch & Extension cord from the Hardware store.
i'm in love in air compressor? looks so nice, neat and elegant. And I hear its quite silent.
thats a great compressor i hope they let u keep it.
Nice thanks for the review
You can buy Sparmax and Iwata air compressors and air brushes at Hobby Lobby in GA in the U.S. The Sparmax is way way way more expensive though.
I've seen the flyer used with Ammo by Mig's One shot primer before. Haven't used it myself though.
I was skeptical about the bottlr air brushes but if you end up with a good experience it might have to be a buy awsome video btw got to chill out for a good 20 lol
Looks sick. Been looking for a new setup myself. Glad to see sparmax come to the rescue to keep my gunpla fix goin!
As someone looking to get into airbrushing soon, what do you do with leftover paint after a paint session (assuming you aren't going to save it)? Throw it away? Pour it down the drain? I've never heard anyone mention it so I never really knew.
Save it in solvent safe sharp cap plastic bottles or glass with a few steel balls as mixers.
I use the Flyer for clear Coats only , It's perfect for that .
Been using this brand for 10 year, doesn't show any ages so far
Definitely recommended for its price & durability
Would love to see how it performs with a siphon airbrush?
All compressors basically let out 66db of sound. From the small ones to the 15 gallon one I use
My Iwata Smart Jet is serving me well since I first got it with the HP-CS 2 years ago (got em both for $100 NIB off of Craig's List). But in the event of the unfortunate, I'll keep this one in mind.
Same I have a Smart Jet pro and a HP-CS as well as a 0.5 Trigger Neo for priming been using them for a few years now all 3 were great buys and I love them too. If you are ever looking for a Detail Brush give the Mr. airbrush Custom 0.18mm PS770 a go fit and finish its pretty much a Iwata Custom Micron: CM-C Plus with different markings for 2/3 the price, Not cheap by any means but cheaper then a CM-C
Power: Get a extension with a switch.... :P
Although it's a joint venture between iwata and sparmax as iwata acquire them and do a bit of restructuring. It is iwata the bigger fish here swallowing airbrush companies. Same as they did with harder & steenbeck a few years ago.
i got the air brush
it is relly helful if you have a ton of parts to paint
Hey Zach, I'm looking for an airbrush for basecoats and topcoats next to my Iwata HP-CS, what can you recommend?
I just took delivery of this same compressor today June 2020} and Im over the moon with it, I got the rust coloured one they had on a short run and it matches my best airbrush lol, though that doesnt really atter does it!, I am posting this because anyone worrying about noise need not worry, it is REALLY quiet, If you were working in one room it would not bother anyone in another room at all. The next model down {610} although the same compressor runs faster and thus is louder than this twin model, I think they back off the speed on the twin because they have two pistons working that fill the tank really quickly, so it doesnt have to work as fast or hard and is far quieter. I was going to go for the Bambi silent but honestly this is quiet enough, it's nothing like the noisy little bugger I ran years ago. I bought mine from a UK outlet, Airbrushes.com, came in one day WITH a set of rust effect paints free, great service.
there are a lot of professional builder here that recommends this one as well
Hey. What would be a good paint to use on metal and plastic with these guns ?
Sparmax compressors are really nice, been using a TC-610H the last 5 years. I think the Flyer is really good for primer coats if you don't want to use a rattle can.
Is is quite enough to use it in an apartment? I don’t want to annoy my family/neighbors. Do you hear it in the next room? Would you recommend it?
Did they airbrushes come with the set or did you buy separate? I'm looking to getting on my LHS got in the same he opened the top to show me abit before a customer came in so only saw the hose! It's only £200 it's same compressor and box just wondering if the airbrushes came with it?
Bought this compressor a week ago. WOW
I'm planning to get that soon from Hobbyco. Im just deciding between the T610h+ or T620x. I dont know If I will ever need the extra PSI t620x provides
I think the only thing that you would get out of the psi jump if you ever wanted to spay metallic auto flake because I know there are a few brands that have small flake well small enough to get through a 0.6mm instead of a huge industrial auto brush
F for the old compressor, also using a Flyer Airbrush for the first time is probably feeling like you're a street bike user who then tries an off-road bike, that is the only comparison i can think of, lol
I'd use the big gun for backgrounds on canvases
I wish I had the time to airbrush my kits because that part of it is very foreign to me.
I'm deciding between Iwata and Sparmax. Any advice?
can't wait for the G40 paint job
Just did all the base painting today!
@@ZakuAurelius Cool! I'll keep posted
Anyone had any problems with rust from the tank.
I would consider the Flyer a Spray Gun, like for painting cars, not an airbrush.
Is the 620 louder then the Iwata Smart Jet Pro or better in anyway?
I use a smart jet pro and this seemed louder but the thing you need to remember is that the smart jet has no external tank so while it is quiet it can be running longer so its a trade off of how you want your noise and the sparmax 620x tops out at around 60-65psi where as the Smart Jet Pro says tops out at just above 35psi
I though Anest Iwata was the parent company and Sparmax is a brand owned by it.
Iwata also bought Harder & Steenbeck at the same time, lol..
Off topic. Zaku, is the Tokyo Gunpla Guide that's on the usagundamstore.com the updated version? Thanks
Not yet! Should have that available this week. When do you leave?
@@ZakuAurelius at the end of February. I'm plotting out a general itinerary. It's not major revisions right? Just some adjustments/updates right? I'll just use the older version then switch over to the updated version when it's on the website.
Regina Phalange yep nothing major! But the updated version should be up soon
Is rg qant gundam is big?
How much$
They are expensive compared to other brand, will you still get them if its not free?
When it comes to compressors I believe you get what you pay for. I’d rather buy one that will last 5 years (for example) than one that lasts 2 years and have to buy another one
It's a mid range compressor from a good brand of course it's not that cheap but it's not an expensive high range compressed by any means.
It's not even the most expensive compressor out there. It is literally a mid range compressor. You get what you pay for. You want a cheap 49.99 compressor then you can find one, but it isn't going to perform like a higher quality one would.
Yay mg barbatos wip incoming :D
Rejoice!
Have you seen the prices for extra bottles for that flyer airbrush? Pff...ridiculous.
How does it compare with your iwata? which one better?
Iwata is better.
@@bunnyfreakz modern iwata compressors looks like as 100% sparmax made product.
This is expensive air compressor
You get what you pay for, as they say 🤷♂️
@@ZakuAurelius or what people send you for free 🤷♂️
joshua hensley Hmm I wonder why a company would send me products “for free”? Almost like it’s my job that I spend 50 hours a week creating content to have an audience to showcase products to 🤔🤷♂️
👏👏👏👏👏👏☝️☝️☝️
Do they have a 110 power supply model? Harf to find a good convertor here in the Philippines...
I Hope I’m first.
good review but u talk too much man u made me tired 😴 talk lessss