How to fix a single motor electric desk when the legs are uneven or out of sync?

Always try "Reset" (press and hold the "Down" button till the desk reach the lowest and reverse) before try the steps in this video shows how to fix the single-motor sit-stand desk when the legs are not level or moving out of sync

[@aliciamadgwick2970]

truly saved me from a complete meltdown - thank you!

[@ishepperd]

The manufacturer's instruction say nothing about making this adjust to ensure the legs are even before continuing assembly. I assembled mine only to discover there was about a 1.5" height difference. Fortunately it was pretty quick to disassemble the necessary parts to get to this rod to adjust the height. Thanks for the video.

[@sarahjohnson1044]

I put this together (took me a couple hours) and was so excited and then noticed that it was uneven. Couldn't help but feel so defeated. Found your video and managed to fix it in a few minutes. Honestly so grateful you put this up. Thank you!!!

[@michelleanizio]

Thank you for this video! I was able to fix my desk!! 😊

[@mvo.xobeauty]

Thank you for this! I was able to fix my flexispot even after being all the way set up!

[@az-qf9ht]

Used the video to know which way to turn the transmission rod nut to loosen it. You are a life saver

[@mjv5010]

I can't loosen the darned thing. At least now I know I am turning in the right direction. It just won't pull apart. I think I jammed it or something, ugh. I've already removed the top and the things that go over the legs (the pieces you screw through to attach to the desktop) once. Here we go again but hopefully this time it works.

[@user-hd7bu4sy9y]

Thank you so much! Was literally losing my mind after putting together my desk and only 1 side was going up. Didn't even have to take it apart, just fixed that spindle as shown in the video and everything works.

[@curtisjones3598]

Thank you I couldn’t figure out why only one side was going up. This was of great help!

[@rakajawaa5500]

I got an mxtark 59" table and it didn't mention about making the left rod go all the way (indicated by that little circular plastic). This video helped me set it up properly. Thank you!

[@raelynng100]

After assembling my desk, one side didn’t rise. I watched your video and viola! It works! Thank you 😊

[@WillyMacShow]

Bro thank you so much, all of the other videos on this topic were useless

[@CRianna926]

Thank you so much for this video!!! Helped me fixed my desk!

[@wanderingfattie]

Thank you!!!! The rod for my desk didn't have a "depth indicator" nor was it mentioned in the instructions but only one side was moving. so I removed it as shown in the video and just pushed it in as far as I could before securing it back into place. And it works now 🎉

[@divya5195]

Thank you we were able to fix the issue with our desk

[@Joss1245]

Life saver! Thank you 👍

[@DaraStarrTucker]

Helped me fix my issue. Thank you!!!

[@nativekesh]

Life saver!! Thanks!!

[@Martatita]

Omg thank you! This helped me fix my desk!🎉

[@ridiculousriss]

Thank you for this video!!!

[@nandeeshnandu6245]

Thank you so much. You saved me man 🙏🙌🏻🙏🙌🏻🙏

[@jaemeaza5208]

Thank you so much.

[@TheElegantGoddess]

Thank you, thank you, thank you!! ❤

[@shibby22182]

THANK YOU - saved me a fuss!

[@sureshhalade]

Thanks very much for this video. You saved my day and frustration. This helped fix my newly bought standing desk.

[@immyhuss5722]

Lifesaver!

[@sampathk1212]

Is there a rack and pinion mechanism inside those table legs ?

[@jellykid]

I have a duel motor table and can find anything on fixing it it's been almost a year now I'm going crazy

[@user-co3kb1bq9x]

I have had a single motor desk for about a year and have had trouble with it from day one. I currently have the problem that only one side wants to work. Pressing the reset doesn't work at all. It just keeps moving. The left side is stuck in the high position and I'm afraid if I go all the way down with the right side it will mess up the left side. Would appreciate suggestions. Of course the manufacturer is not helpful.

[@brian_correa]

tutorial is lit

[@solty3928]

mine rod broke from middle and I can't find replacement anywhere:(

[@dguy117]

I didn't know that part came apart! This helped me fix it! Was stuck on this last step

[@SuperApril98]

Thanks dude, I almost wanted a full refund

[@campad3878]

yeah fuckin fixed it the spinny pole wasn't in the slot go at it

[@kylerobertson777]

Mine won’t go down

[@AZheatherrr]

Where’s the sound!? I’m having trouble because of no sound😮