Dear customers: QianLi is commited to providing service with high quality, including after-sales service. Our agents in different countries also are responsible for after-sales service. Please feel free to contact us and the agent you bought from when needed. Moreover, please notice that QianLi doesn't have any direct-sale official on-line stores on Amazon , Aliexpress and shopee . We have an direct official account on Alibaba for BtoB.
Please help me!!!! I need to restore Taptic Engine but I don’t have the original one. I know the vibration SN but your software won’t let me write the date through the computer
Isn’t programming AM LCD’s at all. Am I doing it wrong? I’m plugging OEM LCD into port, copy data and disconnect. Immediately put AM LCD in same port and write data. It never works, I figure I’m doing something wrong but the lightning port on the unit is faulty as well.
Hello, how do I copy and write without having the original battery of the iPhone? I am changing it for another original battery and I swle the following sign, unable to verify this iPhone has a genuine Apple battery.Health information not available for this battery, and it is sure that I am using genuine battery, can someone help me, thanks
Is there such thing as original apple battery that being sold?? I mean apple is anti-repair and they didn't sell their genuine parts to customers or to other company. So what is sold in the market are AAA+ parts. And to your problem you have to get the original battery since its the only s/n registered to your device there is another way though by using an nand write to edit syscfg of the device.
iphone xr shows battery service with no capacity and pop up genuine batter message on the screen. its original battery inside ok i took out new battery from my spare phone and tried to copying data from old battery onto new one all done sucessfully with this tool but its still shows no capasity and genuine battery pop ups so what is the solution for this
Hi, i did exacly the same, icopy says everytihing ok, even i can see the correct mtsn on its display, but i still cant se truetone, i tried with several LCDs, do you know what might be the problem?
I just bought one and it doesn't power on! There seems to be a charge port on the end but no USB cable fits it. How does it charge? What cable fits it?
I’m on the same boat. The only way to turn it on was using the Apple Lighting cable. Edit: Apparently they’re two models of their product. One with built-in battery and then the other without battery. So it looks like we got the one without the battery.
It doesn’t comes with a battery thats why you need to connect the lightning cable every time. You can install a battery though. There’s a gap behind the the screen to fit a small size lithium battery with iPhone 7 connector. Even though there’s no room for iPhone 7 battery.
@@Pleiades55 strip down an iphone 7 battery connector from an old iphone 7 battery then solder it to any 3.7v lithium battery that you could house inside the module. For example old Nokia 3310 battery would be a perfect fit or something similar in size.
Hello, I've heard that if we connect the replacement LCD screen to the motherboard before copying the data via the Quanli box, we won't be able to copy the data correctly. Is this true?
when battery data copy, a new battery will replace with original old data battery then battery life will run perfectly in battery health? what about iphone xs above, when we change a new lcd even original lcd , did copy iplus can remove detect about lcd?
how to receive the verification code to use the newer version of ql repair helper? them request has no email as result. and the older version of the ql repair helper has a data read timeout -.- any suggestions for that?
Im having trouble with the battery reader, either its not working or doesnt work as intended. I can read batteries but i cant write to any new batteries. I get "write unsecssful, please check its connected". I know its connected as it reads the battery in first place. Ive tried updated and still nto working. Also, it reads the icopy in pc but when i plug battery in it doesnt detect in pc software. Ive followed all the intructions and this video. So is this just a bad unit or the device just doesnt do as intended?! Can you message me on here as not got whatsapp at the moment. Thanks
My two batterys are dead after editing they are showing as 0mah what should i do to get them back and they both are showing as 8plus they are originally xs batteries
How do you change language? I had mine in English and it switched somehow to Chinese and I can’t read anything. There must be a way cause I did it somehow. Please help
Finally, to up ICopy Q2.0 => to use PCB battery detection follow this :p www.unionrepair.com/how-to-upgrade-the-toolplus-icopy/ After that step, QianLi software detect an update V2.2.3 to V2.2.5 Accepte, the device go update mode automaticaly Seek out the programme auto download on your folder QianLi => update => ICopy Enjoy it :)
Where can I find a battery for this in the UK? Mine says "battery not connected maybe the battery is loose" when I try to clear cycle times on a battery.
I tried it with the software, and once you change the battery health it bricks the battery.. I thing the ic chips on the replacement battery are no good. that's the problem
@@AppleReviews yeah I got a new 8 and 8+ aftermarket screens but better quality and $4 more expensive and yeah I could copy data to the new screen and true tone is working
@@AppleReviews < The iPhone parts aftermarket is a clusterf*ck, on some of the cheapest screen "copies" they use an LCD salvaged from on original screen, that's why it works. ;)
First time i connected it to pc it started an update..during the update lighting cable accidentally disconnected and now wont turn on and pc doesnt recognise it..any way for a hard reset on the device??
I replaced hundreds of iPhone 11 screens in my repair shop and they all worked perfectly fine. I only use high quality parts (at least $100 parts). The problem is a lot of people use cheap shit parts, then of course they're having issues. I'm not saying that the iCopy is useless, but if using the right parts you can do without it.
Hi I copied the data from original screen but as soon as I plug in non original LCD the data copied disappear. Not possible to copy to non original screen
LCDs now are calibrated for color so they come paired to the logic board. When you connect a new screen the screen will work but the True Tone function will not. If you want to restore TT the you read/copy code from original broken screen and then write the code onto the new screen before assembly.
I've been doing iPhone repairs since 2007 and never had a problem with good high quality replacement screens. Issues happen to those cheapskates who are trying to save $10, which is obviously not worth it. Just get a grade A/B screen and you'll thank me later. ;)
@@BillAnt for the iPhone 11 and up you’ll need this. Even with a genuine Apple screen you’ll still need this. Apple is trying to crack down on people repairing their phones.
@@mitchvince4770 < Well that sucks, they can shove their apple up their ass. Don't get me wrong, nothing wrong with this device, just the way Apple is conducting business. All the screens I've replaced so far seem to work just fine. What features does this device re-enable? Screw the phone repair business, time to trade some stocks.... Apple stocks among others. lol
Dear customers:
QianLi is commited to providing service with high quality, including after-sales service. Our agents in different countries also are responsible for after-sales service. Please feel free to contact us and the agent you bought from when needed.
Moreover, please notice that QianLi doesn't have any direct-sale official on-line stores on Amazon , Aliexpress and shopee . We have an direct official account on Alibaba for BtoB.
What is the link to your store or which agent can offer me your products to purchase in united states?
@@MiguelAlvarezAdams you can find it in fixez.com
Please help me!!!! I need to restore Taptic Engine but I don’t have the original one. I know the vibration SN but your software won’t let me write the date through the computer
You are a genius!
A well designed solution.
Very Cool. All I need now to learn Mandarin
😂😂
Or you can use the google translate by taking a picture of your screen with your smartphone. ;)
@@BillAnt Or switch device and app to English and follow the on-screen-text ;)
can we add the circuit for iPhone 11 series's
Awesome product! Will order one later.
For more details, please contact our sales:
WA：+86 17376840164
Contact me if want this
@@toolplusqianli9219 有没有中文说明书下载啊？
Does the board commectors work with iphone 11 and 12 series? Thank you
Isn’t programming AM LCD’s at all. Am I doing it wrong? I’m plugging OEM LCD into port, copy data and disconnect. Immediately put AM LCD in same port and write data. It never works, I figure I’m doing something wrong but the lightning port on the unit is faulty as well.
Hello,
I have Qianli iCopy 2.0 and I was wondering do I need to plug my lighting cable to charge it?
I can’t turn on the device without the cable?
Is there an option to change the language on this to English?
Hello, how do I copy and write without having the original battery of the iPhone? I am changing it for another original battery and I swle the following sign, unable to verify this iPhone has a genuine Apple battery.Health information not available for this battery, and it is sure that I am using genuine battery, can someone help me, thanks
Today, do you have answer for this?
Is there such thing as original apple battery that being sold?? I mean apple is anti-repair and they didn't sell their genuine parts to customers or to other company. So what is sold in the market are AAA+ parts. And to your problem you have to get the original battery since its the only s/n registered to your device there is another way though by using an nand write to edit syscfg of the device.
Thanks wonderful video ❗️
Hi is this needed to program the front and rear camera, battery, flashlight flex, and lightning port replacement and other replacement parts?
can this tool write or overwrite data to old logicboard? example is i want re-write to second logicboard
iphone xr shows battery service with no capacity and pop up genuine batter message on the screen. its original battery inside ok i took out new battery from my spare phone and tried to copying data from old battery onto new one all done sucessfully with this tool but its still shows no capasity and genuine battery pop ups so what is the solution for this
Same problem whit xs max
anyone got fix yet?
Apple has the battery data stored at the thing at the bottom of the battery, so the only fix would be to transfer it on the other battery
Dorion Garcia thank you ..you mean the thin chip borad at bottom of the battery, i am going to try it will see the result
Aiyub Isat yes that .. it requires a bit of micro soldering
Thank you for your sharing
hi , is it possible to read battery data stored in iphone eeprom ? my original battery died after shock , and cant read info from it
Hi, i did exacly the same, icopy says everytihing ok, even i can see the correct mtsn on its display, but i still cant se truetone, i tried with several LCDs, do you know what might be the problem?
Main logic board needs repair
I just bought one and it doesn't power on! There seems to be a charge port on the end but no USB cable fits it. How does it charge? What cable fits it?
I’m on the same boat.
The only way to turn it on was using the Apple Lighting cable.
Edit: Apparently they’re two models of their product. One with built-in battery and then the other without battery.
So it looks like we got the one without the battery.
It doesn’t comes with a battery thats why you need to connect the lightning cable every time. You can install a battery though. There’s a gap behind the the screen to fit a small size lithium battery with iPhone 7 connector. Even though there’s no room for iPhone 7 battery.
@@rifatahmed4659 What battery does fit & has the right connector, I have bought one with no battery & would appreciate the advice? Thanks!
@@Pleiades55 strip down an iphone 7 battery connector from an old iphone 7 battery then solder it to any 3.7v lithium battery that you could house inside the module. For example old Nokia 3310 battery would be a perfect fit or something similar in size.
I have an iPhone 8 plus. Is it necessary to use the lightning breakout board in order to replace the charging port?
Hello, I've heard that if we connect the replacement LCD screen to the motherboard before copying the data via the Quanli box, we won't be able to copy the data correctly. Is this true?
Anything being developed for the iPhone 12 series? Bet it's more encrypted and harder to crack. :(
Qianli copy power for batteries, covers the 11 & 12 series
@@Benchandbeyond - Well that's the least desired feature, we need screen, faceID/proximity, and vibrator copy functions.
Is the devices language changeable to English ? Where do I purchase it from ?
Does anyone know what battery will fit & has the right connector, I have bought one with no battery & would appreciate the advice? Thanks!
when battery data copy, a new battery will replace with original old data battery then battery life will run perfectly in battery health? what about iphone xs above, when we change a new lcd even original lcd , did copy iplus can remove detect about lcd?
ive never needed these for screen or taptic engine repairs or anything
how to receive the verification code to use the newer version of ql repair helper? them request has no email as result. and the older version of the ql repair helper has a data read timeout -.- any suggestions for that?
Very good tool
What is the function of the baseband part? You can now replace baseband chips?
Copy some detaction code from the base band,. Just transfer the data, Sir.
Where and how can I download the computer software?
Im having trouble with the battery reader, either its not working or doesnt work as intended. I can read batteries but i cant write to any new batteries. I get "write unsecssful, please check its connected". I know its connected as it reads the battery in first place. Ive tried updated and still nto working.
Also, it reads the icopy in pc but when i plug battery in it doesnt detect in pc software. Ive followed all the intructions and this video.
So is this just a bad unit or the device just doesnt do as intended?! Can you message me on here as not got whatsapp at the moment. Thanks
Please contact WA: +86 17376840164
I know this is from a long time ago but did you ever get this resolved as I am having the same issue?
Can you restore the Taptic engine data without the original one as well?
sadly not
You can do any of this with a different tool
@@m.m.m.c.a.k.e < Which tool sir?
Alguien me puede ayudar a saber como se conecta la batería de un iphone 11 pro o si ocupa algo especial
is there an english version of the software?
yes
almacena la informacion una vez leida y sirve para varias veces escribir y que modelos soporta
can change the language or not ?
Hello Sir,I am unable to ready the MTSN number with 3utools.Can you suggest any other software.Thanks
My two batterys are dead after editing they are showing as 0mah what should i do to get them back and they both are showing as 8plus they are originally xs batteries
Same here with my iPhone X battery. Now shows 0mah and the phone is off and shows only the charging icon. Any solution ?
did you plug them into the wrong connection on the board? Try rewriting them with the left connection
@@mattmocciola6079 yes bro but they are really dead for ever
Have you find any solution ?
Why is it needed when i replace a display?
When you replace display TrueTone option doesnt work
@@toster234 < Perfect! Less features to worry about. lol just kidding
@@BillAnt its pretty useless anyway haha
Can i backup LCD and other data to computer for future use ?
If you mean save the data into PC files, and write in wen new LCD arrived, yes it can.
How do you change language? I had mine in English and it switched somehow to Chinese and I can’t read anything. There must be a way cause I did it somehow. Please help
Double click the write button on start up screen
Salve dove posso aquistare la batteria interna.Grazie
hello, I can not register, never sending the verification code, 5 days trying and nothing. any solution?
Can you please pin post where to download the software?
yop, here dude :)
Ver.1.2.3 only :/
geekbar.tools/attachment/zips/1/2019/07/XmzAKxCzh8C1Xpf8aMkCNsxeiACMxf.rar
Finally, to up ICopy Q2.0 => to use PCB battery detection
follow this :p
www.unionrepair.com/how-to-upgrade-the-toolplus-icopy/
After that step, QianLi software detect an update V2.2.3 to V2.2.5
Accepte, the device go update mode automaticaly
Seek out the programme auto download on your folder QianLi => update => ICopy
Enjoy it :)
Where can I find a battery for this in the UK? Mine says "battery not connected maybe the battery is loose" when I try to clear cycle times on a battery.
Please conatc WA: +86 17376840164. We prodvide after-sales sevice
Hey Colin r u from UK?
@@rajeshseth368 Yup!
@@colinhill9793 wch part of UK? Actually I m travelling to UK this month for cellphone business purpose
Can this be use for fingerprint sensor?
I don’t think 😞
Do not work on Xr battery.
Got iCopy Plus. True Tone copy does not work any iPhone 7 and 8 series. So far only worked on X series.
iphone 7 does not have true tone. This feature was first introduced on iphone 8.
Help I cannot use my program without it keep prompting me to update to v2.2.5. Where can I download v2.2.5 file to update my iCopy?
Please contact WA： +86 17376840164
Please contact WA： +86 17376840164
Could this device restore battery health functionality to replacement batteries by using the data copying feature?
Do you have answer for this question?
No, it won’t help with that
I tried it with the software, and once you change the battery health it bricks the battery.. I thing the ic chips on the replacement battery are no good. that's the problem
It's a good device but unfortunately working only on original screens :(
I already tested on few screens types.
@@AppleReviews yeah I got a new 8 and 8+ aftermarket screens but better quality and $4 more expensive and yeah I could copy data to the new screen and true tone is working
@@AppleReviews < The iPhone parts aftermarket is a clusterf*ck, on some of the cheapest screen "copies" they use an LCD salvaged from on original screen, that's why it works. ;)
I bought icopy and it does not have internal battery?
@@JokerBogdanov how did you match the connector?
I haven’t seen any that support the 12 series yet
It’s out now
First time i connected it to pc it started an update..during the update lighting cable accidentally disconnected and now wont turn on and pc doesnt recognise it..any way for a hard reset on the device??
lo resolviste?
:( no copy battery iphone X > (all iphone XS, 11, 12, 13 not copy)
i need that tool for iPhone 11 series. what can i do?
I replaced hundreds of iPhone 11 screens in my repair shop and they all worked perfectly fine. I only use high quality parts (at least $100 parts). The problem is a lot of people use cheap shit parts, then of course they're having issues. I'm not saying that the iCopy is useless, but if using the right parts you can do without it.
the truetone copy work it with aftermarket display?
work with non original LCD
Hi I copied the data from original screen but as soon as I plug in non original LCD the data copied disappear. Not possible to copy to non original screen
@@toolplusqianli9219 I tried with non original LCD but as soon as I plug it in connector all data from original is erased
yes... with me the same... so support aftermarket or not??
@@matinbutt8265 thanks. You've just made my mind up not to get this!
only for apple?
Just stick with "oranges" and you won't have to worry about the rotten "Apple". ;)
@@BillAnt lol
Will not work won’t copy from original lcd to the replacement lcd .. this is garbage I’m planning to return mine
You can buy cheap "refurbished" screens with the original "LCD" only and aftermarket digitizer. It's the LCD which has the EEPROM to write to. ;)
does the true tone works only on iphones??
Help nothing appears on the screen after I plug in an iPhone battery
me too, please help
Same here. But I have a aftermarket battery and that reads just fine.
please help me recovery my icpoy plus login password
Apple 🤦
Banana! xD
😂
So why would I need this when I repair the LCD on an iPhone would it not just work with a new one
LCDs now are calibrated for color so they come paired to the logic board. When you connect a new screen the screen will work but the True Tone function will not. If you want to restore TT the you read/copy code from original broken screen and then write the code onto the new screen before assembly.
I've been doing iPhone repairs since 2007 and never had a problem with good high quality replacement screens. Issues happen to those cheapskates who are trying to save $10, which is obviously not worth it. Just get a grade A/B screen and you'll thank me later. ;)
@@BillAnt for the iPhone 11 and up you’ll need this. Even with a genuine Apple screen you’ll still need this. Apple is trying to crack down on people repairing their phones.
@@mitchvince4770 < Well that sucks, they can shove their apple up their ass. Don't get me wrong, nothing wrong with this device, just the way Apple is conducting business. All the screens I've replaced so far seem to work just fine. What features does this device re-enable?
Screw the phone repair business, time to trade some stocks.... Apple stocks among others. lol
Can this be used to make FaceID work again after swapping parts?