Almost eternal lighter
ฝัง
- เผยแพร่เมื่อ 12 พ.ค. 2017
- AliTools goo.gl/GTX12g
Buy a plasma lighters alipromo.com/redirect/cpa/o/oo...
Buy high-voltage converter alipromo.com/redirect/cpa/o/oo...
Buy tranzistor IRFZ44 alipromo.com/redirect/cpa/o/oo...
Battery 14500 alipromo.com/redirect/cpa/o/oo...
How to disassemble the Ferrite Transformer • How to disassemble the...
Most of these videos have useful information despite being fake. But the fact that you put "Almost" in the title and admitted there is no such thing in the video, you got my respect and subscription. Thank you for the great video!
I've looked at several videos for such projects and this is easily one of the best, because it requires a skilled winding of the coil, along with the fact all the parts probably can be found in the same dead computer. Thanks
Very cool, especially the homemade transformer. The solar charging was a nice touch.
I find boiling the transformer in water for ten minutes is enough to loosen the glue used on the core. With some heat protective gloves you can pull the cores apart while they're still hot.
Thanks for the tip, makes it easier to get the transformers apart. Semper Fi,
Wow this is genius cause if you are in a survival situation and are like lost in the woods with this lighter you to an extent have an unlimited fire starter, if your lighter goes dead just leave it in the sun and then by night you'll have more fire starter, and if you can start a fire easily, then u won't have to worry about running out of gas as long as you expose the lighter to light once in a while
the wrost part of the project is winding 😭😭
Worse nightmare
Soo true
Very detailed, with examples, nice close shots without shaking, enough lighting , drawings etc., Presented well, fantastic work done. I love the entire video by its content and how its made. really really nice job. I appreciate and subscript too.
the pre built transformer mentioned at the end works quite well, but i would point out it can also be had as a kit.
look for '15kv arc generator'. they sell both the transformers separately as well as a kit with the transformer and the circuit/components.
(though not including the battery and solar cell)
I was so anxious to build it too, but I was very difficult in wrapping the secondary cable, I have several times failed.
me too
Could you use a small joule thief in between battery and solar cell to help keep voltage and current up to charge battery? Also could you use small graphite brushes or lets say, 'Tig welding tungsten electrode as the ark contacts?
great video. detailed description. nice work
I've made only 980 windings. And my ferrite coil was broken in to multiple pieces so I glued it together. And I was out of material. But It worked anyway, just arc light was very small. But how it zaps 0_0. As for experiment I've applied 12 v. I've burn single irfz44n and small arcs appeared around copild everywhere. After replacing irfz44n with new one everything works fine again. The next version will be superior. I hope to have larger arc.
Ahhhh... you can still overcharge a Li-Ion cell with a small current. In such an instance, you should use a protected cell, with a board that cuts off to prevent overcharging and over discharging. You can also use a phone battery, a lot of them feature such protection built in. But dont always assume that this is the case, test to make sure first.
Zener diode bro... 😂😂
Great Video and helpful. I made it successfully. Thanks
You should add a TP4056 Charging module
mini zvs made out of laptop battery protection circuit mosfets would work great in applications like this
Can a micro (JOULE THIEF) be used after the solar cell to boost voltage and current going to the transformer? Thank you for your very fine video's. It's appreciated by me. Knowledge is key to all things and I want to know about all things. Please keep teaching all those willing to learn.
what a beautiful narration
Awesome & super informative video. Thank you!
Is there any downside in using ordinary transparent tape? Like, could the secondary winding heat so much that melts the tape an ruin the isolation?
can you make any circuit with the transformer with four total coils two primary two secondary
i have seen those but they were too complicated could you make any simple one
hei... questo e' veramente bello.. bravo !!
well im not getting it to work anymore, first try it worked until it break the isolation. after was just failed. always i try to do it, it make a thin sound in the core but it wont make any arc bigger than 0.5mm. i tested my mosfet, its p80nf55, and its working. i even tried with that high transformer from old lcd and it didnt worked. i have no idea why i got it to work 3 times from 23 attempts. im frustrated, you lose alot of hours just to winding the secodary. -_-
Very nice description.
Really nice! :)
Please make another plasma arc video. I see your videos from italy
vary informative. thank you.
will 1300x series of transistors work? (I have 13005,13007)
AWSOME VIDEO!
Best but can we use the DVD transformer
got this working with a IRF 3205 which is basically a much higher amperage version of the one used in the video. however due to the low voltage of the mosfet it might be smart to add a diode to steer most of the negative voltage from the gate pin to ground and to add a diode to the battery to protect it. especially when using it for long therm usage
Testing it without the diode directly fried the mosfet, with it it worked well. so do not forget to protect the mosfet against tho high negative voltages.
Hi...i need your help please.. i have a multi-secondary coil transformer to produce an Arc..but only one side of the transformer at a time produces an arc spark...is there a trick to produce X-shape spark as an Arc lighter with this transformer? please Help...please see the attachment at your facebook page, Thank You.
i didn't quite understand stand the name of the solar panel. what was it again? thank you.
what solar panel did you use? link?
From which direction secondary winding should start
Well came here because the normal high voltage generators can't handle decent usage, so I decided to make my own one, with a 300A rated mosfet. was thinking about making a fg-ms-driver stepupcoil, a modified slayer exciter cirquit, or a high impedance mechanically switched ignition coil. for the first stepup.
most other modules I have used (except for one low voltage +- 1k to 7k volt(possible peaks to 10k)) all blew themselves up like improper factored led's(yes they can explode around rated voltage when it is misfabricated).
but things like a plasma driven lawnmower would only work very short before chrashing. do not use plasma to cut gras or other plants, this can permanently damage and quite easly kill the plants, I didn't think of that yet and just thought this is a great knife so it should be able to cut gras.
but if that cirquit works with a fet like said, then it is worth a try especially since it generates magic AC which is in many projects very usefull, and it doesn't require to use power from a light cable which is also great.
how many turns primer&fedback, secondary?? first turns primer? or secondary??
Hi
i have put 5 layers of transparent tape. but my plasma arc is generating inside the transformer. what can i do?
can I replace 1N4733A with schotky's diode 5a 60V? I have all componenets except this one.
Better if you put the switch in series to the feedback winding
Nah dud
Well better if you protect the switch with a diode, you don't want driving inductive load with a tactile switch, they are rated for 50mA at most.
nice explanation👍👍👍
My transformer not producing arc please help
Can i use 13005 mosfet
so it's not lethal?
How many volts are used to create the plasma charge?
Yellow is yellow red is red and blue to absolute bits.....💥
How does this work sinse transformers only work on AC?
Thanks for the detailed explanation!
IRF Z44 is getting damaged after 2 seconds of arc, pins are showing shorted connection after damage. I've used heat sink, it doesn't get hot. I've used exact same components.
What could be the problem? Why IRFZ44 is failing after only 2 seconds of arc? Do I need to connect diode from gate to source or use a capacitor?
TIP41 C is working but it is giving very very tiny arc.
How can I troubleshoot this?
@vial.of.photons Thanks! Now I get it. Secondary is giving nasty kick back when there is no/long arc.
Hi friends, I have successfully built an electric light thanks to the tutorials from Kasyan TV and some videos from the channel on youtube. Because I use secondhand components from other electronic devices, so in my project I use transistor TIP41C, but the problem is heat transistor and require heatsink, of course heatsink require space and affect the shape of lighter. I tried to use K1457 mosfet former power supplay CPU, but it did not work. So how is the solution? Should I use IRFZ44?
try using the BD241 transistor adding a uf4007 diod to the base, otherwise, u can use irfz44 adding a cermic capacitor (470nF=471j) across the primary coil.
I too made one from kasyan and worked, but it only produced arcs 3 to 4 mm, deceasing the primary windings actually made the arc smaller
Any ideas on how to make larger arc?
can I use D882 transistor for this arc lighter?
can i use irfz44n?
Can I use small 12-0-12 type transformer?
It's cool to see a woman doing electronic videos. Subscribed.
It's a dude. :v
Can you make a smaller version of this
Very cool project, will probably try to make it at some point; though I'd suggest you either use NiMh batteries or add a protection circuit, because Li-ion batteries can get permanently damaged or explode without one. I'll probably go with NiMh cuz their safer and way cheaper
@blakkeu13 I didn't know that. Thx
How many primary and secondary wire rolls
please show how to make a 0-50v 0-3a power supply
Falguni Vyas with cc and cv
Makka Pakka means
CC - Constant Current
CV - Constant Voltage
How many layers of teflon tape did you wrap around each layer of wire? Ideally, you should wrap around more layers towards the last few layers of wire.
It needs 6 to 8 layers :)
can i use FQPF8N60C 600V N-Channel MOSFET
could we use more voltage
I like your videos
It's very fun content
And useful
what is that black diode in diagram?
Can i use D880 transistor?
where are you got this plastic box ????
Can i use p55nf06 mosfet???
I did so but somehow it did not work, I used irfz44 and the 220 ohm resistor
If i want to build this without the solar cell would I still need those diodes?
danyCD17 no
Yes indeed they are needed for the feeeback circuit
Hi, i have a problem here, i get thr arc from the circuit but for some reasons the FET burns up after some use. Im using an 18650 cell to power up the circuit. What might be causing this to happen?
Large curent flow, use heat sink
You're English is very good.
there is a video about a car head light { halogen } to undo the solder
I don't trust that battery, lol. 14500 cells DO NOT have capacities of 2800mAh... more like 850-900mAh max. If that was a 18650, then perhaps the 2800mAh rating would be more realistic.
The best way to separate cores is to put it in a tin can with some water and boil it for 20 minutes on the stove. pull it out and gently twist back and forth until it comes apart.
meh, i just heated it for 2 minutes with a soldering iron at 370 degrees and it came off
Great video
Wo.. Amazing.. time to make my own *-* SUBSCRIBED...
Nice video ...😁👍
Can I use irfz44n transistor?
Can i use D 13007???
Excellent
Very helpful
Now where's my dark matter?
thank you
Can I use a BJT?
Can I use d882 transistor?????
I didn't understand make the winding . Please clarify the winding counting...
How many turns of tape does it carry in each insulation?
Nice voice
Will this work with an AA battery ?
Thanks great nice channel video I like this post
thanks it work
I made one but i can only get arc upto 2mm not more than that plzzz someone help
Guitar Guy reduce the primary winding to half of its current amount... if you have 8 turns on the center tap ...use 4 it doubles the voltage outout
Can someone tell me the frequency of the inverter ac out so I can choose the right ferrite core
10 KHz
Can anyone explain why the 1N4733A thingy at the solar panel? i dont understand what it does
It's a Zener diode. It may be working as a voltage regulator, but don't take my word for it.
i broke the small transormer can i use the big one and will itcwork with same amount of turns.
Yes
What is the transistor name ?
My core's side broke, if i glue the 2 piece together it will work?
Supergluing ferrite cores makes them 99.99 percent as good as new....provided that you glue it straight!
Please just read up on "Flyback transformers' and emf.
Im New here really enjoying this channel. Thankyou.
Can we use transformer as it is
there not show the which type of transistor
what do I do please reply
Nice....i made my own its really works....
the video ist gut!